PDA

View Full Version : MazdaSpeed3 Brakes and Suspension



  1. caliper paint
  2. Hawk Pads for Mazdaspeed3
  3. Hotchkis Sway Bar Kit Available Soon
  4. MS3 Spring and camber plate problems
  5. Squealing Brakes ....... Again ?!
  6. Thoughts: Koni FSD's and/or Eibach Pro Kits on MS3?
  7. COBB Suspension kit
  8. Eibach vs. Tein
  9. Hawk Ceramics and Goodridge SS Brake lines
  10. KVR 2 Piece Rotors - Ottawa Region Deal
  11. Strange click in forward & noise rolling backwards
  12. Oh Oh(Oil) Shock Speed 3
  13. OEM rear discs
  14. Recommend a good brake upgrade for M3GT?
  15. Need Brakes; Help?
  16. Rotor Warranty Coverage?
  17. Brake Parts For Mazdaspeed (Part Numbers)
  18. Brake Hub
  19. Mazdaspeed coilovers
  20. where to get OEM spec rotors + pads~
  21. Brake Service
  22. Eibach Prokit
  23. BIG bump - Speed 3 goes OUCH!
  24. Roadmagnet springs,anyone?
  25. Noob question about aftermarket rotors
  26. looking for some re-assurance...
  27. Rear suspension creaking
  28. Cobb springs problem
  29. Koni Sport/Yellow's settings
  30. Shock/Strut Options?
  31. Rear Shock Replacement - OEM
  32. Where to buy H&R coilovers?
  33. KONI YELLOWS
  34. Gen 2 shocks/struts on a Gen 1?
  35. Bilstein sport(rear)/Koni yellow(front)?
  36. Fortune Auto Coilovers?(Stainless Steel with 50mm pistons)
  37. Interested in Camber Plates from Ground Control ?
  38. Looking for lowering springs for MS3
  39. Eibach Pro Kit will they fit!!!!!!
  40. H&R Spring from Corksport
  41. 2010 ms3 - eibach prokit - vibration trouble after installation
  42. Is anybody using hotchkis rear bar, with stock links?
  43. Koni yellows or Koni FSD, its not that easy
  44. where to get Koni yellows?
  45. Bumpstops...
  46. Coilover VS Shocks+Springs upgrade?
  47. Are some pads compatible between Mazda3 and Mazdaspeed3?
  48. HowTo: Change front brake pads on Mazdaspeed3
  49. Magnum vs Power Slot
  50. MS3: Inexpensive OEM Shock Replacement
  51. Creak or squeak in front suspension when cold
  52. Whiteline Sway Bars
  53. Coilovers Vs Lowering Springs
  54. Koni Yellow's Vs. Bilstein Sport Shocks
  55. Rear Spring Rates
  56. Anyone one have experience with Canuck Motorsport lowering springs?
  57. Just Arrived
  58. Noise when turning at low speeds! Help!
  59. Sway Bar Collars
  60. Popping sound from front of car
  61. Mazdaspeed Coilovers with stock springs?
  62. New Koni install, rear clunking?
  63. rear trailing arm bushing polly or rubber/better pricing
  64. Weird cricket chirping noise, front suspension. Clunk in rear.
  65. What spring will give me a miminal drop? Gen1 Speed3
  66. What setting should I set Koni Yellows with Cobb Springs?
  67. Gen1 springs; swift vs prokit
  68. Wore out bearings?
  69. will 16" OEM 3 rims fit over gen2 brake calipers?
  70. Squeaky sway bar bushings front rear.
  71. Brake pads + rotors
  72. Corksport lowering springs
  73. Prokit and Koni Yellows Review and Discussion
  74. Suspension / Control Arms
  75. MAZDASPEED3 CORKSPORT LOWERING SPRING!!!!!
  76. Are the other rotors really better than OEM?
  77. Wilwood 4 Piston Brake kit
  78. Quick answer needed regarding torquing bolts
  79. B12 Prokit
  80. Rear Suspension Problem
  81. B12 Prokit
  82. Sensen Struts and shocks?
  83. Bad bind sound after replacing front end links
  84. Gen2 oem springs in a Gen1 Speed3
  85. Front rotors, brake pads and rear shock replacement advice.
  86. Lowered on Pro Kits - Uneven Drop in the Rear
  87. Brake pad help
  88. Leaking Rear Shock - Knocking Over Bumps
  89. Where to buy parts.
  90. Standard Suspension
  91. RSB Bracket Broke AGAIN - Looking for replacement options
  92. Brake options ( Rotors & Pads)
  93. Shocks, Struts, and End Links
  94. Coilovers
  95. Front springs loose?
  96. OEM Pads/Rotors/Service Questions
  97. SS brake lines
  98. So what should I do about shocks?
  99. Tuning and modeling suspension experience?
  100. Sway bar end links
  101. 2007 Speed3 front lower control arms
  102. Part number for kyb rear shocks for gen 1 speed 3