Sedan Mazdaspeed Exhaust on a Hatch

[nabru]

I recently purchased a Mazdaspeed exhaust, but due to a part number error I ended up with a sedan exhaust.

To those who like the look of a tip that extends by an inch or so from the bumper here\'s how it looks like on a hatch.

Note: there were no fitment issues.

Here are some pics from different angles, hope the pics work
http://img466.imageshack.us/img466/49/ex13bj.jpg

http://img370.imageshack.us/img370/975/ex20xz.jpg

http://img370.imageshack.us/img370/2967/ex31zf.jpg

http://img370.imageshack.us/img370/2364/ex46cb.jpg

That\'s how it looks underneath the car. I raised the car to install the correct exhaust.
http://img318.imageshack.us/img318/9536/ex58qx.jpg

You can catch a small glimpse of the progress sway bar on this pic.
http://img361.imageshack.us/img361/4064/ex67vs.jpg

Here\'s the final one.
http://img406.imageshack.us/img406/7075/ex79ub.jpg

So far, the Mazdaspeed exhaust has been pretty nice. Not too loud, and quite agressive when you step on it.

[chaser]

It doesn\'t stick out too much, looks nice :)

BTW, welcome to the forum :hoho

[SABIO]

Looks fine to me... I like it better. You can read that it is a MazdaSpeed exhuast.

[cyberscorpi0]

Looks Good.

[FLIPDADY]

Yeah some people like the tip to stick out a bit.

Sorry about the mix-up with the 2 part numbers.

Btw, your car looks great man.

[sp3GT]

How much does the Mazdaspeed Exhaust cost around?

[nabru]

to Flipspeed:
No worries about the mix-up, I called you about the error and exactly one week later I received the new part. So I should thank you for getting the replacement within such a short amount of time. Great service, great guy.

Installing the exhaust was pretty fun, nice and easy too, but that\'s as long as you have jack stands.

this is how it looks now in my hatch

http://img125.imageshack.us/img125/1672/dsc003084ua.jpg

to sp3GT:
You\'re looking at around 600 tax-in plus install. And I believe, if you have it installed at the dealership (visit Flipspeed @ Mazda of Toronto) you are warrantied on the labour, so that\'s an extra peace of mind if you don\'t feel comfortable cutting your stock exhaust.

[etothex]

That pipe looks pretty sweet. I\'m thinking of getting one for my 3.

Flip, how much would installation be?

[Skarbro]

It looks better when it\'s not sticking out IMO.

[FLIPDADY]

Originally posted by etothex


That pipe looks pretty sweet. I\'m thinking of getting one for my 3.

Flip, how much would installation be?
If you want the stock system cut it\'s $132.30 plus taxes.

What model do you drive? I have a used sedan one in stock for cheap.

[etothex]

I have a 2005 GT hatch. You wouldn\'t happen to have one for the hatcg for cheap? :)

[FLIPDADY]

Originally posted by etothex


I have a 2005 GT hatch. You wouldn\'t happen to have one for the hatcg for cheap? :)
Nope but if you want to put the sedan one on we can talk a good price.;)

[etothex]

I think I\'d rather go with the one for the hatch. But thanks.

[wtom]

Originally posted by nabru

http://img361.imageshack.us/img361/4064/ex67vs.jpg

Apologies if I assumed incorrectly but you should be placing the wheel blocks on the "other side" of the wheel, furthest away from the raised end. You want to stop the car from rolling "away" and "off" the jack/jack-stand.

[nabru]

No worries,

My driveway is quite angled, the car would in fact roll backwards if the blocks were put at the front. But yea, blocks are a must.

Gotta make sure the car is stable, safety first!:)

[Zaku_4]

wow

i like the sedan one. protruding tips are hawwt.

how much for the used sedan one flipspeed:D

[FLIPDADY]

Originally posted by Zaku_4


wow

i like the sedan one. protruding tips are hawwt.

how much for the used sedan one flipspeed:D
Already sold it a few weeks ago.

Sorry.

I do have a new sedan one in stock though.

[KC-01]

Originally posted by FLIPSPEED



Originally posted by Zaku_4


wow

i like the sedan one. protruding tips are hawwt.

how much for the used sedan one flipspeed:D
Already sold it a few weeks ago.

Sorry.

I do have a new sedan one in stock though.

Hi Joe,
Can you give me a quote for the Mazda Speed exhaust for the hatch? Does anyone have a soud clip of it?

Thanks.

[bluntman]

Originally posted by KC-01

Hi Joe,
Can you give me a quote for the Mazda Speed exhaust for the hatch? Does anyone have a soud clip of it?

Thanks.




Originally posted by FLIPSPEED

-Sport Exhaust (sedan and sport models) $530.10


**All prices listed above include the TM3 discount and do not include taxes.**

Sticky

Taken from this thread...

http://torontomazda3.com/forum/read.php?TID=5250&page=3

Sound clips can also be found in the same thread, but on page 6...

http://torontomazda3.com/forum/read.php?TID=5250&page=6

[Broli]

i like the look of the hatch exhaust on the hatch better!


the sound of this intake is very nice
every time i hear one of they guys who have it
i think, that really sound good!

[FLIPDADY]

I currently have 1 of each system in stock.

[KC-01]

Originally posted by FLIPSPEED


I currently have 1 of each system in stock.


So $530 + tax for the sport exhaust? I\'m very interested. Joe, would you know how much the service deptat MoT charges for the installation? Would I be able to get a good price for that?

Thanks.

Kent

[FLIPDADY]

Originally posted by KC-01



Originally posted by FLIPSPEED


I currently have 1 of each system in stock.


So $530 + tax for the sport exhaust? I\'m very interested. Joe, would you know how much the service deptat MoT charges for the installation? Would I be able to get a good price for that?

Thanks.

Kent
Yup $530 + taxes for the system and $132 + taxes for labour.

[FLIPDADY]

Here you go Chuckie!

[Chuckie]

thanks for the bump!.. i was looking for this..
I doesn't look as bad as I imagined it would be.
but i still like the tucked look..
refer to avatar.

p.s: xg won't sell it to me for my lowballer price.. LOL.
if only i didn't spend so much now or get paid a little more...
gots no money right now.. almost 0.
next paycheck if someone is selling a hatch exhaust for around the same price. i'd jump on it.

[wtom]

Ha, looks like my protrusion :P

[FLIPDADY]

Ha, looks like my protrusion :P
No pics please!:chuckle