JiNuWiNe's Crystal White Pearl GT Sedan

[JiNuWiNe]

I picked up the car at Mazda of Toronto from Jeff on April 25, 2008.


So far I have done the following mods:


Axela Badge - $14 from MOT
Removed door molding - $0
Blue LED Map and Dome Lights - Free! Thanks to eqlso!
smoked ABS LED 3rd brake light - $45 from Rx9
17" Advanti RS Hyper Black with Falken 912s - $1220 from Simply Tire
Red painted calipers with decals - Free! Thanks to Allen!, $15 for decals from Mleblond
Relocated front licence plate to lower grille - $0
Lowered with Eibach PRO-KIT Springs - $250 from Speedtech, Installation at Street Performance - $90
OEM Raised Spoiler - $124 from rburns - eBay.com, $17 from Customs! :flaming



Waiting to do the following mods:


28% tint all around
Buddy Club Condenser
8000k lows and 6000k fog HID lights
Blue and white Angel eyes
AEM CAI
MS3 Cat back exhaust
JDM grille
JDM Front and rear lip



Pictures taken June 30, 2008
http://img262.imageshack.us/img262/451/cgmeetjune302008001mt3.jpg

http://img78.imageshack.us/img78/7894/cgmeetjune302008007pj5.jpg

http://img258.imageshack.us/img258/3947/cgmeetjune302008006ij5.jpg

http://img117.imageshack.us/img117/5759/cgmeetjune302008009yt7.jpg


Pictures taken May 28, 2008
http://img135.imageshack.us/img135/5210/aftercarwash023bx7.jpg

Smoked ABS LED 3rd brake light
http://img104.imageshack.us/img104/5053/aftercarwash025gj7.jpg

http://img174.imageshack.us/img174/3306/aftercarwash028if7.jpg

http://img128.imageshack.us/img128/7929/aftercarwash035ow0.jpg

http://img294.imageshack.us/img294/7770/aftercarwash042ek5.jpg




Pictures taken May 25, 2008
http://img294.imageshack.us/img294/6880/picture061xu3.jpg

http://img394.imageshack.us/img394/5518/picture062ml9.jpg

http://img246.imageshack.us/img246/9317/picture065xo8.jpg

http://img380.imageshack.us/img380/294/picture068qw1.jpg

http://img501.imageshack.us/img501/8436/picture069fl4.jpg


Pictures taken at the TM3 BBQ
http://img138.imageshack.us/img138/750/picture006rm6.jpg

http://img375.imageshack.us/img375/7061/picture005editpa2.jpg

http://img169.imageshack.us/img169/5138/picture004xg8.jpg

http://img207.imageshack.us/my.php?image=picture003pa9.jpg

http://img248.imageshack.us/img248/982/picture001editor3.jpg

[sauga_kid]

Congrats on the pick up...let the modding begin!

[RallyPlaya]

Pictures Look Pro & its Not Stock its Got the Axela Badge and TM3 Decals thats a Good Start Nice Ride man

[austinl]

Looks great!!

I am in the same boat.....looking to start the mods so its not stock any more :)

[mintegt]

Nice car.
Im also looking to get a white 3

[cwp_sedan]

Nice colour! :)

[Jeff-TheBiz]

surprised it is still clean.

The decals look great.

[MikeyGT]

hey, i saw this car before.... ohh yea, i saw you yesterday:chuckle

[leems]

hey, where'd you get that tm3.ca sticker? that looks good where you placed it.
and nice ride, i've always loved white cars

[JiNuWiNe]

hey, where'd you get that tm3.ca sticker? that looks good where you placed it.
and nice ride, i've always loved white cars

Nice guy Jeff gave me those lovely decals. :)


surprised it is still clean.

The decals look great.

Believe it or, I've washed this car 3 times already ever since I picked it up. :loco Every freaking time I wash it, it rains. Process repeated twice. :bang

[WhiteSpeed3]

nice ride and perfect colour choice

and dont worry i was forced to wash my car 2 hours after picking it up after a bird dropped a log on my windshield when i went inside just to eat dinner

[JiNuWiNe]

As for tinting, should I go for 20, 28, 30, or 35% on a CWP Sedan? I think 20% is too dark, I have astigmatism so it would make it even more difficult to see at night. Any suggestions? perhaps some pictures to share? Thanks.

[JiNuWiNe]

Should I relocate my Licence plate??

[cwp_sedan]

Unless you are planning to fill the holes created by the screws for the bracket, I would leave it.

[Kaz]

As for tinting, should I go for 20, 28, 30, or 35% on a CWP Sedan? I think 20% is too dark.

Its personal preference. If you think 20% is too dark don't go with it. I think if you do a search for other threads with pics and decide which you think will work best.


Should I relocate my Licence plate??

Again its personal preference. Do you like the look of a relocated license plate? If so move it to where you like it. If your OK with where it is now then leave it.

[RallyPlaya]

As for tinting, should I go for 20, 28, 30, or 35% on a CWP Sedan? I think 20% is too dark, I have astigmatism so it would make it even more difficult to see at night. Any suggestions? perhaps some pictures to share? Thanks.


Personally i believe if you are going to Tint you have to go 18, 20, 28 % for it to loook amazing..... but if you are too nervous about the tint law you can keep it safe and go 35 20. My Tint is 20% all around and im very happy done @ audio heaven

[mazdas3sporte]

how much would a 20% tint run me?? all around, i have no tint now and i dident want to get it at the dealer , they seemed shifty

[Aggy]

how much would a 20% tint run me?? all around, i have no tint now and i dident want to get it at the dealer , they seemed shifty

Contact the sponsors or check the other threads...it should run you around $200, but there may be cash deals, combo deals, etc...

RFD also has some threads regarding tinting in TO.

[mit-gee-mui]

how much would a 20% tint run me?? all around, i have no tint now and i dident want to get it at the dealer , they seemed shifty

Tint stuff
http://www.torontomazda3.ca/forum/showthread.php?t=24192&highlight=tint+thread

[JiNuWiNe]

Added new pictures, comment away!


Yeah, I gotta fill those 2 holes on the front bumper. :bang Anyone got some good ideas for it? I went to RONA and they didn't have those plugs.


And YEAH! Lowering it next week on Pro-kits.

[JiNuWiNe]

Added new pictures!

[FONZ]

Where is your OEM Raised Spoiler? :S

[LockOut]

Like the look of the relocated plate. What's it being held on by now?

[huyzel]

Looks good.
what did you do with the holes left in the bumper after relocating the plate?

[Mafty]

i dont see lowered or spoiler? do you own these products but not have them installed?

[JiNuWiNe]

Where is your OEM Raised Spoiler? :S

Good eye, I JUST finished installing it. Will post pics soon!


Like the look of the relocated plate. What's it being held on by now?

Thank! Zip tie.


Looks good.
what did you do with the holes left in the bumper after relocating the plate?

I am going to fill it with plugs that will fit..


i dont see lowered or spoiler? do you own these products but not have them installed?

I JUST finished installing the spoiler. I have the prokit and my appointment at Speed Performance is at Tuesday.


Thanks for the comments guys!

[Aceius]

Looks really good man, nice and clean as well. My g/f loves the white, can't stop talking about it, especially when we pass by one..lol..

[JiNuWiNe]

Looks really good man, nice and clean as well. My g/f loves the white, can't stop talking about it, especially when we pass by one..lol..

Then you should of gotten a CWP, she would love you even MORE!!

[RX9]

the new rims and tires look hawt. nice and clean.

[oni]

You sure didn't waste any time w/ the mods! GJ.

[huyzel]

Did you replace your new rims with NEWER rims?
keep up the fine work. looks good!

[RallyPlaya]

Looks Good thats some fast modding now all you need is some Tint and HIDs to finish off the look and then you can get more into the game

[m3m]

Nice rims, my brother has the same rims, looks sweet

[jboic]

What does everyone use to hold the license plate when they move it lower to the side? Twist ties or something?

[JiNuWiNe]

Posted some new pictures, comment away!

[Garu]

I'm not sure if you tint your windows or not, but it looks they are not tinted. How come!

[JiNuWiNe]

Haha Garu, I'm getting them tinted this week at Jeff's, 28% all around!

[MistaChin]

your ride looks MEAAAAN. I'm getting antsy, i can't wait till mine arrives!

[jcutner]

Lowered with Eibach PRO-KIT Springs - $250 from Speedtech, Installation at Street Performance - $90

What or where is Speedtech? Cheapest I've seen is $300 from Tires23

[Fuman]

What or where is Speedtech? Cheapest I've seen is $300 from Tires23
just google "Speedtech toronto"

[jcutner]

damn - just called. $300 taxes in
still good i suppose

[mazdathree]

JiNuWiNe, what size are your tires?