PDA

View Full Version : US Mazda3 need DLR's enabled


sauga3
06-06-2008, 12:34 AM
Hi, all

New to forums, wanted to ask if anyone could help me out with procedure of how to enable DLR's in 2007, 3 sedan GX model equivalent from states. Need it for inspection. Canadian tire quoted $250 + taxes. Any suggestions on how i could do myself?

Any help would be appreciated.
yellow 3
06-06-2008, 02:11 AM
http://www.torontomazda3.ca/forum/showthread.php?t=14574
Gizzmo_jr
06-06-2008, 09:45 AM
2007? HA, just put in a 5A fuse in the fuse box. Done, 5cents later you have DRL.
You should have a "DRL" empty fuse spot under the hood.
cwp_sedan
06-06-2008, 10:06 AM
2007? HA, just put in a 5A fuse in the fuse box. Done, 5cents later you have DRL.
You should have a "DRL" empty fuse spot under the hood.

Isn't it a 10A fuse? Not that it REALLY matters... :)

If the wiring is the same and the only difference is the fuse, then this should work to give you DRLs.
Gizzmo_jr
06-06-2008, 10:21 AM
Isn't it a 10A fuse? Not that it REALLY matters... :)

If the wiring is the same and the only difference is the fuse, then this should work to give you DRLs.

HAHA yea doesn't matter, but good point. As far as I know, the American wiring within the fuse box should be the same.