PDA

View Full Version : Stock 2007 Mazdaspeed 3 Mustang Dyno


mleblond
10-06-2008, 09:47 PM
http://www.youtube.com/watch?v=qjEbODotUWg

what do you think of this?
Gizzmo_jr
10-06-2008, 10:27 PM
I think I recognize the voice
Pretty good run for stock
:chuckle
Fobio
10-07-2008, 05:45 AM
so...how stock is stock? ;)

nice pulls...let's see the sheet!
mleblond
10-07-2008, 12:21 PM
http://i151.photobucket.com/albums/s147/mleblond/Copyofdynocopy.jpg

tq is fck and my hp line is still up there at redline
Fobio
10-07-2008, 02:43 PM
for a mustang dyno, I'd add at least 10% to that number when comparing to a dynojet/dynapack...that should put you @ 308whp/295wtq, and you and I both know that that number is prolly a little low still...

something weird about the HP and rev's...how come they shut it down after only 6300rpm?

we have 3 dynos from 3 different places...hehe...let's get together do it again in the off-season.
mleblond
10-07-2008, 02:57 PM
yeah weird how my HP line doesnt drop. The guy did not want to rev it any higher. He told me more arounr 16-18% difference to a dynojet. But yeah whatever. This eagle talon did 463whp (AWD) at 37psi boost :chuckle
x_o_k_x
10-07-2008, 09:29 PM
is this like unfinished.. whats with RPMs stopping at 6300k, thats when you get most power after 6000 rpms..
mleblond
10-07-2008, 09:42 PM
lol not sure, did a ms3 dyno when ottawa mazda went?
x_o_k_x
10-07-2008, 09:46 PM
Even though its still unfinished 280hp is pretty impressive, so you're pushing about 300hp..:hawt
theurgy
10-12-2008, 10:54 PM
Yeah I did my MS3 at the same Dyno... Roger and Edwyn did mine:
I pulled 248WHP and 260 Ft/Lbs of Torque.
With only really a CP-e Cold Air Intake.

http://i26.tinypic.com/16i8hz4.jpg
07Speedfreak
10-13-2008, 07:28 AM
Got 245whp and 264 wft-pds/tq at Tapps with an Injen cai

http://img89.imageshack.us/img89/6659/stockwithcaidynospeed3cuz5.jpg


Edit: My curves are all over the place. You guys are steady.
Kevin@nextmod
10-13-2008, 11:09 AM
Are these infos all SAE corrected?
mazdas3sporte
10-19-2008, 06:56 PM
thats allota power to the wheels for a speed 3 , i thought it would be around 220Hp.... 260+hp just seemed not achievable but i guess iam wrong 245 to wheels is amazin, if u see the american cars they have 200 hp to the motor and more like 140 to the wheels loool