PDA

View Full Version : any RMM install?



pkaczmar
05-24-2011, 03:25 AM
I have read in a few places that this is an easy install but havent seen a how to's with pics anywhere. anybody done this before and can offer some advice. I got the right setup in my garage to get right underneath the car just need the proper instructions.
thanks in advance.

breakfasteatre
05-24-2011, 07:24 AM
check out mazdaspeedforum.org

SomeGuy
05-24-2011, 12:09 PM
Mine went in on the weekend...it's ridiculously easy.

- Jack car up and support it properly
- Support transmission with jack
- Unbolt 3 bolts from stock mount
- Unbolt 3 bolts from Alumnium bracket thingy
- Remove stock mount
- Replace in reverse order

Done...

Trickiest part is lining up the 3 bolts in the aluminum bracket, but if you do them before the nut/bolt through the mount, you're fine.

pkaczmar
05-24-2011, 04:48 PM
Alright after learning what really has to be done, i don't have the proper setup. Thanks to SomeGuy saying he could help, but he's all the way out in kitchener. Anyone out there in the toronto area wanna help me install a RMM and has the setup and jacks for it? thanks in advance.

WingZero_
05-24-2011, 11:34 PM
JBR has install guides for everything he sells. Here's the one for one of his RMMs.
http://jamesbaroneracing.com/support/JBR%20MAZDA%203%20&%20MAZDASPEED%203%20Chrome-Molly%20Rear%20Motor%20Mount%20Installation%20Inst ructions.pdf