PDA

View Full Version : rzapata's logs



rzapata
08-26-2012, 12:09 AM
Tested out the AP today... Here's what I got.. All 3rd gear, short logs as I couldn't get enough road.

Looks good so far, no knockers, FP holding strong (for now).

I gotta say, stage one is awesome. Immediately noticed the difference on how the car runs... I also like how it idled at around 1000rpm. Plus, car sounded even better. :thumbsup

rzapata
08-26-2012, 02:22 PM
Looks like CSV files got messed up... Will fix em up soon and post again...

rzapata
08-29-2012, 12:08 AM
Ok how's this one?

Everything looks good so far. Fuel pressures holding strong, AFRs are right on, boost targets right on. Looks like a healthy engine. :)

rzapata
08-29-2012, 07:19 PM
Was playing Virtual Dyno just now and here's what I got. :)

https://lh5.googleusercontent.com/--3K6IzKjvrc/UD6VAuYkPEI/AAAAAAAAAck/_FBWtPx52Kc/s800/Stage%25201%2520-%2520SF%2520-%252091%2520-%252015C%2520-%2520Aug%252028%252C%25202012.jpg

fywdyl
08-29-2012, 09:37 PM
Nice! Looks like you may need a MAF calibration thou.

rzapata
08-29-2012, 09:41 PM
Nice! Looks like you may need a MAF calibration thou.

Definitely on my to do list. I'm still reading through the ATR helpfile so it might take some time. On top of that, there's a bunch of threads on MSF that I haven't visited yet so I gotta check those out as well.

But yeah, now that I'm looking at it more, AFR seems a bit on the richer side. A bit.. :)

rzapata
10-06-2012, 02:20 AM
V2.31 log. AFRs are inline but now, boost targets aren't being hit. Car runs well though so whatever. :chuckle

8106