PDA

View Full Version : MS3 w/ GTX3076 - 430whp/435wtrq



Fobio
12-29-2012, 08:44 PM
Ever since we have gone big turbo, the MSpeed guys have been in constant discussion about "the next big thing". Here we are and we are now ready to share results with everyone. First, many thanks to CelestSpeed3/Paul for all his hard work, blood, sweat, some tears and time and effort...since June, Paul has been meticulously putting my car together. Eventhough we still have a few things to work on, Paul has put the car back together to the point where we can make some real power and reinvigorate MSpeed and NATOR Canada's efforts in furthering the platform. Second, a ton of thanks also goes out to BlueStreak/Dave for setting me up with his second built motor and sharing his assembly and tuning expertise to ensure this project progressed smoothly up to its completion and dyno. Without these two guys...my NATOR's, this car and the results would not have been achievable. THANK YOU. THANK YOU. THANK YOU!

As usual, thanks must also go out to Brian and Anthony @ APH is strapping the car on their DynoPak Dyno! =)

Let's look at the parts of the build [if I miss anything, I will come back to add]:

2008 MS3
Forged engine by BlueStreak/Dave
JBR 3.5" Wide-Path SRI
Garrett GTX3076 w/ 0.82 AR Tial hotside
Cobb FMIC coated with black heat dispersant
CP-e exhaust manifold w/ Tial flange
CP-e catback exhaust w/ extra resonator
Tial 44mm external wastegate, dumped
Tial Q VTA blow-off valve
Custom 3" catless downpipe
Custom active oil cooler by CelestSpeed3/Paul
23psi custom MSpeed hybrid load/boost tune
Assembly by MSpeed [Paul & Dave]
All exhaust pieces ceramic coated by Quy's Coating

430whp/435wtrq with straight pump Ultra94
*The previous dyno was with the GT3071 stock engine build*

https://lh4.googleusercontent.com/-_wbJXH1OW90/UN-EbovTMKI/AAAAAAAAFuU/iFgppPSgOYE/s1150/Fobio+-+GTX+3076.jpg

https://lh6.googleusercontent.com/-TC6YRCknYxk/UN-EbcR6EOI/AAAAAAAAFuQ/FQPn6KaGd2M/s1150/Fobio+-+GTX+3076+-+Boost.jpg

Due to a minor oil leak from the oil cooler and the fact that the dump tube needs a bit of extending, we have concluded today's tuning on straight pump gas; but there's likely about 10 - 20whp lleft with this setup. We will finalize the straight pump gas tune, then tune for meth, and might even give race gas a try to take it over 500whp.

Thank you MSF, TM3 and NATOR Canada for all the support throughout the build; all the encouragement and even the doubts have fuelled our journey up to this point and we look forward to showing everyone more of what we can do. Stay tuned for our next update!

Hyperion
12-30-2012, 01:16 AM
http://thechive.files.wordpress.com/2012/04/tumblr_m26er3nhka1qlz5jj.gif

Genpu_Mz3
12-30-2012, 01:47 AM
wow, that is amazing, goodjob! and congrats!!!! that quite the accomplishment!

breakfasteatre
12-30-2012, 03:25 AM
i said this to paul in person, but i think its worth saying again

its pretty ****ing impressive that paul had the car ripped apart, rearranged and put back together, and it started no problem.

Thats badass shit

FD22
12-30-2012, 12:50 PM
http://thechive.files.wordpress.com/2012/04/tumblr_m26er3nhka1qlz5jj.gif

^ This lol

Awesome job...what a beast!

Elusivellama
01-04-2013, 03:29 PM
Congrats on getting your car back, Vince! Last I heard, it was undergoing a total conversion to a Prius :P

So how does 430whp feel when you're...uh... pushing it?

loki
01-04-2013, 04:30 PM
i said this to paul in person, but i think its worth saying again

its pretty ****ing impressive that paul had the car ripped apart, rearranged and put back together, and it started no problem.

Thats badass shit

I never doubted Celestspeed3's ability to get that car back together without a hitch. solid work ethic and attention to detail.

like you said, Badass shit!

rzapata
01-04-2013, 04:40 PM
Whew.... Just keeps getting better and better. :thumbsup

There's got to be some sort of recognition/award being the first Canadian MS3 (that I know of) to break the 500hp barrier. :)

6strings
01-21-2013, 05:52 PM
yikes.

Booter22
01-21-2013, 10:25 PM
how come there is never a dyno vid? i would love to hear what these cars sound like during the pulls.

Shinglez
01-21-2013, 10:30 PM
how come there is never a dyno vid? i would love to hear what these cars sound like during the pulls.

I know! All these dyno charts are impressive but I'd love to see it and hear it

BlueStreak
01-22-2013, 05:56 PM
http://www.youtube.com/watch?v=zTWJfY9KEDs

loki
01-22-2013, 06:46 PM
And yes there are flames coming from the front wheel well

boyracer
01-22-2013, 06:48 PM
never get tired watching that

Booter22
01-22-2013, 09:03 PM
And yes there are flames coming from the front wheel well

stupid question but what is it?

Mr Wilson
01-22-2013, 09:10 PM
Screeeeeeamer pipe.

Fobio
02-06-2013, 04:05 PM
A little update for the non-regulars. OP is here: http://www.torontomazda3.ca/forum/showthread.php?68329-*MSpeed*-Fobio-s-GTX3076-Build

Ultra94 + 7gph 50/50 meth + 28psi @ redline...almost done!

https://lh6.googleusercontent.com/-5gBDGQ67HR8/URHyltZBr_I/AAAAAAAAF2I/2DhiyqR0wA4/s1097/GTX3076_002_1.01.jpg

CH0SiiN1
02-11-2013, 08:38 PM
Damn!!

mikey32235
02-20-2013, 06:51 PM
dayum

greyseason
03-06-2013, 09:09 AM
http://www.youtube.com/watch?v=jYj7T9eEQ4U

Booter22
03-06-2013, 10:26 AM
http://www.youtube.com/watch?v=jYj7T9eEQ4U

couldnt have said it better myself!

BEAST MODE!!! for sure.

dreadlock
05-01-2014, 04:06 PM
wow...just wow

x_o_k_x
05-01-2014, 10:59 PM
Great job, very nice!!

miako
05-01-2014, 11:12 PM
Good god......

terapr0
05-02-2014, 11:55 AM
good lord Vince, that thing must be a monster!
If you ever decide to sell, please let me know ;)

loki
05-02-2014, 12:03 PM
These dyno results were posted February of last year

terapr0
05-02-2014, 06:14 PM
These dyno results were posted February of last year

that doesn't make them any less impressive.

Snotrocket
05-22-2014, 03:39 PM
that doesn't make them any less impressive.

Things have changed.......

Sell it to him Vince!