PDA

View Full Version : COLD AIR INTAKE TROUBLE SHOOTING



Jmboxer21
09-19-2014, 04:32 PM
I recently just bought a cold air intake of ebay, it just came in the other day and im ready to put it in, but I dont want to screw anything up, is their a certain steps that i need to take to be cautious for what I do or even a video to show me how to do it properly? I have an idea but i dont want to screw up. A step by step will help or even a video

Default User
09-19-2014, 04:36 PM
Just be very careful with the MAF wiring harness. Disconnect the clip that secures the harness to the battery box so that there is some slack.

Jmboxer21
09-19-2014, 04:59 PM
Okay and btw i have a 2004 2.3 Gen , so would i have to take out the bumper to complete this job? Id really like to not do that, unless i dont have to jack anything up

Default User
09-19-2014, 07:36 PM
Did you get a short ram or cold air?

I only ask - because a lot of people use the term incorrectly (not to be an ass or anything)

Jmboxer21
09-20-2014, 12:20 PM
OH I got a cold air intake lmao I def know the difference between the two

Default User
09-20-2014, 12:34 PM
LOL

Just making sure

You might be able to get away with pulling the wheel well liner

peterm15
09-20-2014, 12:59 PM
Im lowered and can easily pull my bumper off without jacking it up. So if you need to don't be afraid.

SomeGuy
09-20-2014, 01:27 PM
You can go in through the wheel well liner...no need to pull the bumper. Although pulling the bumper is easy too.