Printable View
Ok so i finally figured out how to do these logs as I'm new to the AP V3.
Mods:
corksport cat-back exhaust (have catted downpipe but not installed until i get a HPFP)
corksport TIH and short ram intake
Tune: Stage 1 + SF
if you guys could review and make sure everything looks okay.(fingers crossed)
i had a Fuel to rich yesterday but hasn't come back.
Dude, you need to do a proper 4th gear wot run for a proper log.
Okay. Lol I will attempt this again tonight after work.Quote:
Originally Posted by Fack_Dude
as fack_dude eluded to, you only made it up to 4700 rpmsQuote:
Originally Posted by Fack_Dude
You could do a 3rd gear pull with your mods, but right to redline
Attachment 12240
so I've attempted to do this better did it on a 3rd gear pull
im gonna do another one tonight when its a bit cooler outside.
wholy log batman. choppy. looks like ur knock happens right before spool up.
yeah i did it and forgot to stop the log after a bit so it went for a while lol.Quote:
Originally Posted by Kiyomi
its only happening at low load. specifically at 0.5-0.75 maybe try lessening your intake advance a bit in those areas. is it boost or load based tune?Quote:
Originally Posted by Twhite71
its happening quite often which is not good. because its happening not at wot but near cruising, you might wanna fix it asap.
Was using the COBB OTS Corksport stage 1 + CRI + TIP.Quote:
Originally Posted by Kiyomi
going to reflash to Stage 0 to see if it helps, still waiting to install internals
why not just fix it? do your own map.Quote:
Originally Posted by Twhite71
If i only knew how to. not that technical with the tuning yetQuote:
Originally Posted by Kiyomi
Can someone review this log to see if i possibly have internals, i was told by someone that i might have it already. i never added it in after i bought the car, pervious owner could have done it though. dont really want to pull it out and apart to find out unless im going to be putting one in.Quote:
Originally Posted by Twhite71
fuel pressure looks good. Almost hitting 2000psi...Quote:
Originally Posted by Twhite71
Impossible to tell for sure if there are internals without pulling it apart and taking a look