Thanks boys! I figured it was the engine coolant temperature sensor. So I got one from Rockauto and replaced it myself.
No codes ever since and temp light coming on normally.
Type: Posts; User: KevinM3
Thanks boys! I figured it was the engine coolant temperature sensor. So I got one from Rockauto and replaced it myself.
No codes ever since and temp light coming on normally.
Hi there,
My car recently has been starting rough, and would drop right away to 600-700 idle rpm - usually 1500 rpm with the cold start but I don't get the blue temp light anymore.
I previously...
Looking for one now.. but seems hard to get a hold off.
Hi there,
Been happening everyday now, but only a few second stretch while I’m driving.
The AT light would come on, and my car would jerk but then it goes away after a few seconds.
Any...
Check the Strut Nut from the engine bay. Probably lose, and there is play on your struts it self. Happens to me often
Toronto Mazda quoted me at $218 a piece. Definitely more than the options I see on RockAuto
Thanks for the input. Would this be the Anchor brand? Seeing it for 70$
Hi there!
Looking for recommended complete LCA replacements with the ball joints
What brand is reputable for replacements?
thank you!
Hi there,
My car's Passenger Side Motor Mount needs replacing.
What brand do you recommend I should replace it with?
Thanks!
White Gen2 Speed that live on Duncanwoods/Finch.
YIHB? I always see you around night times lol
That was me! I believe I flashed my emergency to say hi while you were behind me lol
Your car rolling nice too!
Need a new set for my summer wheels but for my 18s set. The Indy 500 seems to be getting a lot of attention.
Anybody suggest a cheaper alternative? I know the they’re currently $6XX at Simpy Tire...
Anyone running 215/40 on 18x8?
I was running a 225/40 last summer with a +35 offset and would rub at the rears on big dips, and even on slight dips when loaded with at least 2 in the back.
...
Sorry for the super super late reply. Your situation sounds like my other thread where there’s a clunk on the front ends when I hit over a bump on slower speeds. Lots of people and research...
On Wednesday morning southbound on the 400 closing in to the 401 merge. Red Gen3 Sedan with a custom third break lights on the rear valance and rally armour flaps.
I honked at you as i passed by...
How much did you get the front links from Mazda?
Sent from my iPhone using Tapatalk
Haven’t had the chance to check the car but the fronts I suspect it’s the end links.
The rear I believe are the sway bar end links also
Sent from my iPhone using Tapatalk
If I can recall, I’m already on the brakes when I’m slowing down and the clunks come on when going over even little bumps on the road
Sent from my iPhone using Tapatalk
I had a quick check last week when i put my winters on, and the strut mounts looked fine. I suspect the single nut holding the strut bolt to the mounts on the top is loose.
Yeah I read likewise. Unfortunately, Rockauto only has 1 left of the Sachs, and with additional 10$ to ship here by Dec 3 lol
I'll keep looking around
Rockauto is listing brands Sachs at 20$ each and Mevotech at 40$ each.
Not sure what everybody goes with when it comes to replacing the strut mounts
I called Mazda and they don’t sell the...
Yeah I figured I should get the struts replaced.
Amazon has the rear strut mounts as ‘Dorman 924-412’ and I tried using their car fit function but it tells me it doesn’t fit my car. Where can I...
Car is currently at 163k. The strut mounts were reused at both ends. Can the replacement be DYI? I wouldn’t mind doing the work if it’s straight forward.
And where can I get proven replacement...
Hi guys,
Recently I’ve been hearing a clunk when I’m turning right and at the same time going over bumps from the front driver side wheel area. Any ideas?
Also hearing a clunking sound at the...
Update - Checked the car after work and the strut nut was loose - loose as in I can turn the nut with my fingers.
On that note, anyone know how I can tighten it more while using an Allen key and...