depending on where it is hanging from I would say 3M would work fine. I put on an aftermarket lip with 4 screws on the inner wheel well (2 each side) and 3M double sided tape holding up the middle...
Type: Posts; User: CM3
depending on where it is hanging from I would say 3M would work fine. I put on an aftermarket lip with 4 screws on the inner wheel well (2 each side) and 3M double sided tape holding up the middle...
Totally agree'd, on the narrower widths the spokes bulge out where as the 9"+ are flat faced. Based on the results I think i'll be sticking with the RPF1's, time to put in a little work to make these...
I think i'll need those just for the fronts, there's a little more room in the rear. But thanks for the suggestions.
I like the flat face better on the RPF1 and those only come in 9+...at the moment there are 215/45 on them (stretched), I'm on KWs and have camber arms on the way. I don't mind doing a little body...
Hi All,
So in the excitement of the upcoming modding season I ended up picking up two sets of wheels. Unfortunately I can't keep both so if you all could give me some feedback and let me know what...
Hi All,
I currently drive a 2008 Mz3 Hatch but I am seriously considering an upgrade to the 2008 MS3. I have a set of KW v3's on my current car but was just wondering if these would work on a MS3....
Thanks S.W.F & FD22, yeah I guess I may have gone a little aggressive with this set-up...I was really looking to go the functional flush route so I was going raise the car a bit.
Hey all,
just grabbed a set of wheels from a member. They are 18x8.75 +30 and currently have 215/35/18 mounted, I want a larger tire on their just wondering if you think I will still have issues...
ok perfect thanks!!! you are TheMAN
Hi All,
My driver side cv boot is torn, rather then replacing the boot I was planning to just replace the whole thing (almost the same price for a new axle). However I just want to make sure i'm...
Me too, my stock one was torn off this winter while getting stuck in the snow :S
Help just saw a set on Kijijii, i'm assuming some rolling and pulling required?
2008 Hatch
Work CR KAI 18x9 +30
Wheels: 245/40/zr18
Lowered on Tien H-Techs
There was some initial noise during when I went to brake them in but the noise isn't happening anymore and yeah I tried to bed the brakes in right after install.
Ok I just want to make sure there...
Hey All,
I just had new rotors and pads installed on my front brakes, I noticed that the pedal was a little mushy at first but after the rain the other day I noticed that the front right brake was...
http://i621.photobucket.com/albums/tt295/chrisn614/car2.jpg
Myself and my buddies A4...as you can see I need more low
What he did was overkill but if done right it looks pretty cool. There is a fine line between being tasteful and tasteless =)
http://www.mini2.com/galleries/data/500/small_side_CRX.jpg
Looking at getting a set of CR Kai 17 x 9 +42, see any issues? Lowered on H-Techs so a minor drop.
Also what size tires should I get =S new to this wheel fitment stuff
Time to find some BBQ paint...if the weather holds up this weekend I'll have some pics for everyone =)
I'll see if I can get a pic of the back up...but its just the stock silver tip if that helps, Im really liking the matt black muffler...looks really nice
haha yeah my car is pretty murdered out...but I MPS makes a good point that cleaning wouldn't be necessary anymore, hmm i'll have to check and see if they still sell that I haven't seen it before.
So after spending the weekend painting my calipers and wheels I don't think I've satisfied my hunger to paint something...so I thought hey what about painting my exhaust or at least just the tip. I...
Thanks guys, I think I think I'm going to pick them up if its just rolling fenders I should be ok
Hmm rolling fenders isn't out of the question, i'm just not sure if I would want to put any camber on these...do you think it would be ok without having to put camber on it?
I found a deal for wheels and the size is 17x8.5+40 with wheels at 235/45/17...will these fit without and issues.
My car has Tein H-Techs so that is possible 1 inch drop...will these fit without...
That would be bare metal i'm sorta of a perfectionist so I can't just rough it up...possible OCD lol