90% of cooling fan failures on mazda3's are from corrosion in the cooling fan module
Type: Posts; User: Cosmo77
90% of cooling fan failures on mazda3's are from corrosion in the cooling fan module
I can confirm that the transmission will shift into neutral when you come to a stop. It is almost impossible to feel the shift into gear, how ever I have heard of some cars where you can feel it...
Thing is it doesnt matter if your shifting or not, or just highway driving. The gears are all still spinning. Every manufacturer has had syncro issue's over the years. You should see what happens...
Wow, join the group just to slag on a dealer. What are the details of your complaint?
Why don't you go buy a Civic....Go Civic nation
I haven't been in there since January....they always took care of me pretty good both in service and parts. Although that one kid in service "Kevin" is kinda creepy. Felt like he was hitting on my...
the expected warm up time for a mazda 3 engine is about 3 mins at 3500rpm in neutral. you seem fine.
omg thats horrible.....return it ASAP....critical engine damage could be happeneing.....
Yes the rear o2 sensor is there to monitor, but it also has a huge amount of input into the long fuel trim performance and will cause sometimes drastic changes in fuel mielage.
A lot of times when its the motor there is no noise from the motor. Just check the connector at the motor. If there is power on both sides of the connector when you switch "up" or "down" then it is...
80% of the time its the power window motor....the other 20% of the time its the switch. Loose connections only occur during t-bone's on that connector
hmmmm corroded fuse box wiring to pcm KAM fuse....
Creamy residue on the dipstick is not uncommon. Sometimes moisture in the dipstick tube never gets burned off if short trips or if checked when cold in cold weather.
Find the problem with the...
best tpo get a professional opinion of what is wrong. A simple coil failure can make a car run rough and cause over heating issues. Where did you find the milky substance? If it were on the...
LOL Duhh for me
In my opinion its normal...check your coolant level just to be sure...as long as there is coolant in the bottle your good
What year is your car?
It is very un likely that a wrecking yard will seel you belts. Most have stopped selling used belts and air bags for liability reason.
Why would you want 'used' belts anyway? What happened to...
Soemthing wrong with dealerships?
Yes the will fit
Have tha car scanned for codes and go from there. If the lights came on there is a problem in the system.
all laughing aside...the camshaft will also be different in a 2008 engine and will not work with the two pin connector cam sensor vs the 3 pin connector in the 2008
$300 for an alternator is not out of line depending if it is a new unit or rebuilt. I think the labor to install one is about 1-1.5 hr's
Best to just go to a good parts store and ask if they have listings for the tools.
YES you must replace the bolt every time you take it off......and NOOOOOO you cannot do the last 90 degree's...
you will need otc part # 303-507 and 303-465 They retail for about $50-60 bucks retail in total.