Should be the same
Type: Posts; User: chaser
Should be the same
The diagram doesn\'t do any DRL re-routing. If you follow the diagram, you\'ll get no lights until you turn on either parking or low-beam (or you\'re in Auto mode and the environment is dark enough)....
I don\'t think the HID will stay on all the time when in Auto mode. Instead, the HID should go on whenever the parking/side-markers/tail lights are on. Thus, (in Auto mode) if it\'s not dark enough...
Thx MBN.
Diagram updated.:)
Just want to share how I hook up the kit ... It\'s not very technical but takes some times ...
Oh, I forgot to label the wire connects to the fuse from the relay. It\'s \"30\"...
Update ...
After I gave the relay a few taps in the afternoon, the HIDs turn on/off when I turn on/off the parking signals ... werid :sarc Didn\'t have problem throughout the night.
Is that mean...
I\'ve the dual 87 relay from CanTire. I grounded the ballasts to the stock headlights\' -ve slots. That\'s what I\'m thinking too - for some reason the relay doesn\'t switched off.
Just went to...
The ground from the relay (85) I grounded it to the chassis. Yes, the parking lights were off when I switched them off.
Finally got the HID installed last night, using the method/wiring diagram outlined above. I turned on the parking lights to test the HIDs and they worked fine. Today I drove to office with the HIDs...
I\'m looking for 12 or 14 gauge wire that is good for at least 105C (degree). I tried a Cantire store in Markham and some electronic store but couldn\'t find any. Anyone has any idea?
MBN rocks!!:D
For the 3 groundings (2 from the ballasts, 1 from the relay (85)), does it matter which grounding point they connect to? Can I ground the ballasts with the included male connector...
MajesticBlueN, thanks for the xtra info :)
If I follow this diagram, where is a good place to ground the ballasts? Provided that 86 from the relay is grounded to the stock headlight connector...
So, what does the \"30\" slot do in the relay??
Never mind my quesiton, I don\'t know what I\'m asking :sarc