We went out on Bay of Quinte on Saturday for the Qunite Bass Champs event. Lots of boats out on the water. Weather was great and we caught a bunch of fish, can't ask for more. Icing on the cake...
Type: Posts; User: speed77
We went out on Bay of Quinte on Saturday for the Qunite Bass Champs event. Lots of boats out on the water. Weather was great and we caught a bunch of fish, can't ask for more. Icing on the cake...
I ordered the boots from ebay.
If you get toe or camber arms with heim joints, I highly recommend these http://www.sealsit.com/rod-end-boots.html. I put on corksport toe arms last year. I used those boots around the helm joints...
From JBR's site...
Specifications Simulating 1" of body roll:
Stock Sway Bar setting:
MAZDASPEED 3 is 479 lbs/in
MAZDA 3 & 5 is 228 lbs/in
JBR 3-Way Adjustable Sway Bar Settings:
Stiff...
Really ? Pretty sure the rate of that bar is over 1,000lbs. A lot of that force goes into the brackets trying to keep the bar in place.
Reference EG/EK/DC2 Honda/Acura sway bar mounts tearing...
Would probably help if you post the map you were running when you took the log. That way you can compare your targeted vs logged values.
I fish whenever I get the chance.
JRP carries Vibrant silicone hose. I've used it for a bunch of things and it always worked we'll for me.
...
You can buy a fishing license at many Canadian Tire stores, BassPro in Vaughan, many bait shops, or online ( http://www.mnr.gov.on.ca/en/Business/LetsFish/2ColumnSubPage/STEL02_164832.html )
ECU is part of the emissions equipment. I would assume that the OBD2 port is also part of the emissions equipment since it is the only means to communicate with the ECU. Emissions equipment...
Assuming you need H7 bulbs, I've used these and found they work well.
http://store.candlepower.com/osraulhiouh7.html
It's normal.
Wherever you go, ask the shop to check the "radial run out" on the tires. Tires are not generally perfectly round. Measuring run out tells you how out of round they are. It is generally measured...
I've used WD40 to get tar off the paint, might work on rubber. Otherwise, might want to try this http://www.mothers.com/02_products/09224.html
I've sat in the big hairpin, I've sat at the start/finish line, and I've gone general admission many times. To be honest, if you can get a good general admission spot, I'd rather be chillin' on the...
I'm interested
That's basically what I did the last time I went for the purpose of tuning. I had to stay WOT for another second or so past the finish line to get to redline in 4th.
Pulling logs is so much...
If the alignment was done right the first time, it shouldn't need to be redone.
225 is probably as wide as you'd want to go on a 7" wheel
Sidewalls are taller so that will definitely cost you...
I messed up my ankle this week. I can't run, so I'm out.
There is A LOT of energy stored in an inflated truck tire. For reference, the average tractor trailer tire has got 100-110 psi in it, some go as high as 130 psi. Search truck tire zipper break or...
I usually see around 210-214 F in heavy traffic on a hot day, moving or not. It takes a km or two of "normal" driving for the ECT to get back down to normal cruising temps, usually around 183-187 F...
1. The intake tunes are all more or less the same from what I could tell when I compared them. The only difference is going to be the MAF calibration between them. Regardless of the intake map you...
Cobb AP or a Dashawk can be used to monitor coolant temps.
higher rate front springs (as found on the MS coilovers) paired with stock rate rear springs will change the handling balance of the car at the limit. You will end up with a car that under-steers...