Thanks guys! I took the day off work to hopefully get this fixed :)
Type: Posts; User: theo575
Thanks guys! I took the day off work to hopefully get this fixed :)
thanks guys :)
I'm alright around the car but I'm not sure how I would go about removing the belt.
Anyone have a tutorial I could use? Or if you're really feeling like a good samaritan you to...
Hey Guys,
Got this nice sound from the engine today. There's a faint smell of clutch and this sound when running.
https://www.youtube.com/watch?v=jNXi-gifASE
Thanks!
Mike
Thanks guys,
Dave - how would I know if they are sagging? It does feel like the left side is lower than the right.
Hey Guys,
I'm looking for some advice. Friday I broke the rear right shock mount on my first gen gt.
I had the suspension replaced with used oem stuff about 2 years ago by Jimmy but never...
Dealing with this same issue, but I've decided to just bite the bullet and replace my old shocks and struts and all the mounts. Might be overkill but I don't want to be dealing with shocks and struts...
Just curious if I should just go for the Exedy OEM replacement or shell out an extra 60 for an Action Clutch. Anyone know if its worth it?
Garage 16 page for reference -...
Hey Gang,
My clutch is almost done and I was just curious what the negatives of buying a used clutch would be. Its a TM3 seller, says it has 800kms on it. I'm just not sure if I should risk it or...
mine broke as well, replaced with AWR mount so I wouldn't have to do it again.
just curious leungalv, how much did it cost you do get the clutch? flywheel? install?
My clutch is starting to go and am curious at the costs to expect, also I'm not sure, but when you place...
Noisy crow, just FYI, it was an aluminum bolt, one of those mishimoto magnetic ones, and he told me the truth which was he was tightening the bolt by mistake, broke the head clean off.
Today was...
i was thinking jb weld, but yea would take too long to set plus the chances of me gluing everything together are probably pretty high. I have my fingers crossed the guy can weld it and take it out,...
thanks silverstar! I think I'm gonna give this guy a chance on Monday, if worse come to worse, I'll have to drill it somehow to let it drain, then drop the pan... why me...
nothing to grab at all, but I called another shop and he said he'd give it a shot, going to take the car in on Monday.
thanks for the help guys, I would have never thought of that welding trick so...
they said they couldn't weld it after I mentioned the location of the bolt and that the pan is aluminum. Perhaps they were just being lazy?
should i just show up at a shop and see what they say?
...
I think I'll try the welding trick, theres an exhaust shop nearby I'll give them a shout. Thanks guys...
Hey Guys!
So I was changing my oil with a neighbour, and teaching him how, however, I let him take the drain pan bolt out, and despite by instructions of left loosey, righty tighty, he sheered the...
took it to active green and ross, no issues passed and was in and in within 40 min.
thanks guys, i'll be heading in next week and will post an update
reseting the driving cycle is what youre saying sube?
should i take off the cold air intake?
Hey guys,
Curious if anyone has a good place to get their emmission test done in Etobicoke. I was also curious if Jimmy did them. Hopefully I posted this in the right place.
you might have the subs wired backwards, if not try pluggin just one of the RCA's in, fool around till you hear something.
What did you tap into for your signal wire? Cig lighter?
If it is...
Hey guys, so unfortunately I have a new job and the first day is Sunday :(
Have a great day everyone, hope the rain holds off, and every mother ****er that registered previously shows up :) (or...
did that about a year ago to all 4 doors, no issues
the doors are about 10 lbs heavier lol and have a much more solid feeling
... good thing I didn't read this before I took off my airbag today...
I did unplug the battery overnight, plus pumped the brakes, but the emergency lights and headlights on plus put in the cig...