I'll call them to see if they sell it.
Type: Posts; User: hondaciviceg
I'll call them to see if they sell it.
I've used needle nose pliers and pushed but it didn't work, it's too hard p p. these are original caliper a, assuming its taugher than it was new
Hi guys,
I need a brake piston compressor tool which a special tool used for the rear caliper piston to be pushed back to allow for the space for the new pads!
I tackled the rear brake pads...
you guys have confirmed my thoughts about this mechanic, I will stop going there, thanks.
Thanks for letting me know its the thermostat and not the sensor, as i was thinking i would change them...
Hi guys,
in the summer I took my car in to my mechanic to get an oil change done and my mechanical told me that I need to replace my water pump as he sees a tiny hole on it and sooner or later...
Good news boys, I turned the car on after letting it seat for a couple of hours yesterday, and the light didn't come back on anymore, and its been that way since.
I guess it just started bad the...
Yes i think I'm going to try that when I get home tonight.
This hasn't happened to anyone?
Hi Guys,
This morning I hopped into my car and cranked the engine to start, but it sounded a bit weird when it started, it revved up more than usual and the check engine came on. Its an 05 2.0L
...
Haha, Thanks for your help, it works. my bad.
I thought when ever the door glove box is opened it should lite up.
Im guessing the trunk is the same?! Ill have to try that too when i get time.
...
Yes I have switched them around but still nothing maybe I'll try turning headlights on
Hi gents,
I wanted to change my glove box light bulb and trunk light bulbs to LEDs but noticed that the old regular bulbs werent working, so i swapped it with the LEDs and still not working!
Is...
Hey active3s, how did you get those steering wheel control covers off the steering wheel?
I've been wanting to take those off to wrap them in cf. but cant seam to just pull them off.
I'd...
I will Have to agree with you:No Homo Smiley
Hey guys,
I bought some Carbon Fiber wrap and starting to wrap some interior peaces, I just did the dash molding strip and it turned out 9.8/10 I can say, very happy with it, and it only took me...
Just bought the front shocks from torontomazda with the discount came to like 130 a piece for the fronts. damn expensive.
Had the same issue, changed the hand brake cable and fixed it.
Yah my car doenst do that at all, its pretty stiff, but taking out the shock, when you push the shock in it should come out according to my experience, and mine didnt. so i say it gone, but my...
I dont love my car that much. Its got a nice interior and clean running engine and transmission, but everything else pretty much sucks, Car has no sole. LOL its got no attitude and i dont like that...
I always run on 91 Octane from Shell, me, my family and friends have found it to turn out cheaper in the long run. as the 91 octane from shell burn less faster thus using less gas, and i have done...
Construction Estimator, Working at Royal-Thom Construction. Finished school at George Brown College, studied Construction Engineering Technology.
Anyone doing a large scale Interior demolition, or...
I know im doing it right, my uncles a mechanic, i have taken it to my mechanic and my nabours a mechanic. We have tried the pushing on the fender above the shock area and it does not bounce.
Yes i think that you have the same problem that as i did, I got the part from Joe at Toronto Mazda and i changed that mount or whatever it’s called and the knocking and squeaking is gone, although as...
So i guess no one here knows about this?!!:(
Hi guys,
I have an 05 mazda3 and I had to change the top mount on my front passenger side do to nocking sound.
So mechanic takes it apart and he tells me the shock is gone too, that's why this...
OK i got the guy to deliver the part to my house and he took 150 and his gona come take the old part when i pull it out. I tried doing it myself but unfortunately the bolts were too hard and i was...