Page 1 of 2 12 LastLast
Results 1 to 25 of 31

Thread: Dyno results: 2007 MS3(s) at the dyno

  1. #1
    Sr Member Unoriginalusername's Avatar
    Join Date
    Mar 2007
    Posts
    5,621
    Thanks
    0
    Thanked 19 Times in 10 Posts
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)

    Default Dyno results: 2007 MS3(s) at the dyno

    Whitespeed3 is still at the track so I'll let him post up his numbers and stuff when he wants... all in all we had some fun.

    Dyno's were done in 4th gear with TSC/DSC off... Whitespeed3 first round did third with just one of the TSC lights off and made huge gains after some small bpv tweaks, 4th gear (like i used), hood open vs. closed. and dsc and tsc off.

    With the hood closed early in the morning I made 266.6whp and 289.3lbs of tq (4th gear, all tsc/dsc off).

    For our second set once the fog had cleared the air mid day (around 22 degs according to the dash temp gauge) with the hood open i actually gained (as did vince) to 275.2whp and 294.2wtq



    Very happy with the gains of the cpe tbe and ms cai

  2. #2
    Member CanadaGTO's Avatar
    Join Date
    May 2006
    Posts
    1,446
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Dyno results: 2007 MS3(s) at the dyno

    good stuff

  3. #3
    Jr Member 07Speedfreak's Avatar
    Join Date
    Mar 2007
    Age
    44
    Posts
    261
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Dyno results: 2007 MS3(s) at the dyno

    Good numbers. I'll dyno similar I guess..

    Edit: If we calculate a 10-12%drivetrain loss (its the maximum I think for fwd), you're putting between 305-315hp and 325-335ft-pds/tq at the crank. Not bad at all. With my ETS FMIC and the CP-E turbo tbe it should put me to about 330-340hp and 350-360ft-pds/tq at the crank. A Standback EMT would get near 400bhp.
    Last edited by 07Speedfreak; 09-29-2007 at 08:59 PM.
    2009 DMG Subaru WRX265

  4. #4
    Banned
    Join Date
    Oct 2004
    Location
    GTA
    Ride
    Mazdaspeed6
    Posts
    5,068
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Dyno results: 2007 MS3(s) at the dyno

    well we did 303WHP so beat that

  5. #5
    Sr Member Unoriginalusername's Avatar
    Join Date
    Mar 2007
    Posts
    5,621
    Thanks
    0
    Thanked 19 Times in 10 Posts
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Dyno results: 2007 MS3(s) at the dyno

    Quote Originally Posted by Mazdaspeed View Post
    well we did 303WHP so beat that
    who did?

  6. #6
    Banned
    Join Date
    Oct 2004
    Location
    GTA
    Ride
    Mazdaspeed6
    Posts
    5,068
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Dyno results: 2007 MS3(s) at the dyno

    not telling
    but you had to be there to see it
    ill try to post print out later

  7. #7
    Sr Member Unoriginalusername's Avatar
    Join Date
    Mar 2007
    Posts
    5,621
    Thanks
    0
    Thanked 19 Times in 10 Posts
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Dyno results: 2007 MS3(s) at the dyno

    Quote Originally Posted by Mazdaspeed View Post
    not telling
    but you had to be there to see it
    ill try to post print out later
    lol... thats ok, i made 1 more hp than you would have made today so that is good with me

  8. #8
    Banned
    Join Date
    Oct 2004
    Location
    GTA
    Ride
    Mazdaspeed6
    Posts
    5,068
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Dyno results: 2007 MS3(s) at the dyno

    1 more HP ????

    we did 303 WHP

    lol mabe 1 more cus u work for HP

  9. #9
    Sr Member Unoriginalusername's Avatar
    Join Date
    Mar 2007
    Posts
    5,621
    Thanks
    0
    Thanked 19 Times in 10 Posts
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Dyno results: 2007 MS3(s) at the dyno

    Quote Originally Posted by Mazdaspeed View Post
    1 more HP ????

    we did 303 WHP

    lol mabe 1 more cus u work for HP
    On who elses speed ? anyways you missed some fun

  10. #10
    Banned
    Join Date
    Oct 2004
    Location
    GTA
    Ride
    Mazdaspeed6
    Posts
    5,068
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Dyno results: 2007 MS3(s) at the dyno

    i know i did
    but i had stuff to do and a car to tune

  11. #11
    Sponsor

    Join Date
    Sep 2005
    Posts
    5,802
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Dyno results: 2007 MS3(s) at the dyno

    Was there a fan in front of the car when you ran the dyno?
    2010 Subaru STI

    Mods:
    Not enough room to list

  12. #12
    Noob
    Join Date
    Sep 2007
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Thumbs up Re: Dyno results: 2007 MS3(s) at the dyno

    Quote Originally Posted by Pearly View Post
    Was there a fan in front of the car when you ran the dyno?
    Yes, it was huge.

    Nice # .

    Thanks whitespeed3 & his Neon friend for coming.

    He did good at the strip tonight too but I'll let him tells his story so don't spoil it James!

  13. #13
    Member WhiteSpeed3's Avatar
    Join Date
    May 2005
    Age
    37
    Posts
    2,001
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Dyno results: 2007 MS3(s) at the dyno

    well my photos of the dyno sheet didnt come out to well i'll take a different one tomorow but in 4th with hood up and TCS/DCS off HP 269.3 TORQ 279.2, but in 3rd with hood down and DCS only off HP 233.3 TORQ 253.8
    big difference between 3d gear and 4th gear

    differences between the car are (correct me if im wrong)

    Mine: Injen Intake, Turboxs BOV, Turbo XS Race-Pipe, and Stock Exhaust

    Unoriginals: Mazdaspeed Intake, Stock BOV, CP-E TBE

    and at the track my best time was 14.4 sec at 101.4 MPH witch im am very happy with, all and all great day

  14. #14
    Sr Member Skarbro's Avatar
    Join Date
    May 2006
    Posts
    3,700
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Dyno results: 2007 MS3(s) at the dyno

    303 hp? That's awesome.
    2006 Mazda 3 Sport GT●Black Mica●Manual●Sunroof


  15. #15
    Member WhiteSpeed3's Avatar
    Join Date
    May 2005
    Age
    37
    Posts
    2,001
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Dyno results: 2007 MS3(s) at the dyno

    heres the video of my dyno run

    http://www.youtube.com/watch?v=xnlNyngbk6E

  16. #16
    Sr Member Unoriginalusername's Avatar
    Join Date
    Mar 2007
    Posts
    5,621
    Thanks
    0
    Thanked 19 Times in 10 Posts
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Dyno results: 2007 MS3(s) at the dyno

    Quote Originally Posted by WhiteSpeed3 View Post
    heres the video of my dyno run

    http://www.youtube.com/watch?v=xnlNyngbk6E
    wicked.... video was a good idea

  17. #17
    Member WhiteSpeed3's Avatar
    Join Date
    May 2005
    Age
    37
    Posts
    2,001
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Dyno results: 2007 MS3(s) at the dyno

    do u want urs up

  18. #18
    Sr Member Unoriginalusername's Avatar
    Join Date
    Mar 2007
    Posts
    5,621
    Thanks
    0
    Thanked 19 Times in 10 Posts
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Dyno results: 2007 MS3(s) at the dyno

    Quote Originally Posted by WhiteSpeed3 View Post
    do u want urs up
    you got one? can u send it too me?

  19. #19
    Member WhiteSpeed3's Avatar
    Join Date
    May 2005
    Age
    37
    Posts
    2,001
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Dyno results: 2007 MS3(s) at the dyno

    sure pm me where u want me to send it

  20. #20
    Sr Member Unoriginalusername's Avatar
    Join Date
    Mar 2007
    Posts
    5,621
    Thanks
    0
    Thanked 19 Times in 10 Posts
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Dyno results: 2007 MS3(s) at the dyno

    Quote Originally Posted by WhiteSpeed3 View Post
    sure pm me where u want me to send it
    you rock

  21. #21
    Sr Member Broli's Avatar
    Join Date
    Jun 2005
    Age
    44
    Posts
    13,565
    Thanks
    1
    Thanked 4 Times in 1 Post
    Mentioned
    17 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Dyno results: 2007 MS3(s) at the dyno

    great numbers guys!

    nice video!
    - Broli

  22. #22
    Sr Member Unoriginalusername's Avatar
    Join Date
    Mar 2007
    Posts
    5,621
    Thanks
    0
    Thanked 19 Times in 10 Posts
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Dyno results: 2007 MS3(s) at the dyno

    Quote Originally Posted by Mazdaspeed View Post
    1 more HP ????
    we did 303 WHP
    still waiting for this dyno that you and pat were at... who did it and with what mods?

  23. #23
    Jr Member 07Speedfreak's Avatar
    Join Date
    Mar 2007
    Age
    44
    Posts
    261
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Dyno results: 2007 MS3(s) at the dyno

    Went on the dyno today. On a Mustang dyno. 91octane. My mods are Injen cai and Forge bpv.

    245whp@5500rpm
    264wtq@4200rpm



    Wanted base numbers before the mods go on in the spring...CP-E turboback, ETS TMIC and standback if it comes out (plug and play). Pretty happy with the numbers.

  24. #24
    Sr Member Unoriginalusername's Avatar
    Join Date
    Mar 2007
    Posts
    5,621
    Thanks
    0
    Thanked 19 Times in 10 Posts
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Dyno results: 2007 MS3(s) at the dyno

    Quote Originally Posted by 07Speedfreak View Post
    Went on the dyno today. On a Mustang dyno. 91octane. My mods are Injen cai and Forge bpv.

    245whp@5500rpm
    264wtq@4200rpm



    Wanted base numbers before the mods go on in the spring...CP-E turboback, ETS TMIC and standback if it comes out (plug and play). Pretty happy with the numbers.
    wicked

  25. #25
    Member WhiteSpeed3's Avatar
    Join Date
    May 2005
    Age
    37
    Posts
    2,001
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Dyno results: 2007 MS3(s) at the dyno

    so basically my turbo xs race pipe and hybrid BOV made 15 ft-Lbs and 24 hp im happy with that but the full TBE will kill my numbers its been proven already

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •