Stock 2007 Mazdaspeed 3 Mustang Dyno

[mleblond]

http://www.youtube.com/watch?v=qjEbODotUWg

what do you think of this?

[Gizzmo_jr]

I think I recognize the voice
Pretty good run for stock

[Fobio]

so...how stock is stock?

nice pulls...let's see the sheet!

[mleblond]

tq is fck and my hp line is still up there at redline

[Fobio]

for a mustang dyno, I'd add at least 10% to that number when comparing to a dynojet/dynapack...that should put you @ 308whp/295wtq, and you and I both know that that number is prolly a little low still...

something weird about the HP and rev's...how come they shut it down after only 6300rpm?

we have 3 dynos from 3 different places...hehe...let's get together do it again in the off-season.

[mleblond]

yeah weird how my HP line doesnt drop. The guy did not want to rev it any higher. He told me more arounr 16-18% difference to a dynojet. But yeah whatever. This eagle talon did 463whp (AWD) at 37psi boost

[x_o_k_x]

is this like unfinished.. whats with RPMs stopping at 6300k, thats when you get most power after 6000 rpms..

[mleblond]

lol not sure, did a ms3 dyno when ottawa mazda went?

[x_o_k_x]

Even though its still unfinished 280hp is pretty impressive, so you're pushing about 300hp..

[theurgy]

Yeah I did my MS3 at the same Dyno... Roger and Edwyn did mine:
I pulled 248WHP and 260 Ft/Lbs of Torque.
With only really a CP-e Cold Air Intake.

[07Speedfreak]

Got 245whp and 264 wft-pds/tq at Tapps with an Injen cai




Edit: My curves are all over the place. You guys are steady.

[Kevin@nextmod]

Are these infos all SAE corrected?

[mazdas3sporte]

thats allota power to the wheels for a speed 3 , i thought it would be around 220Hp.... 260+hp just seemed not achievable but i guess iam wrong 245 to wheels is amazin, if u see the american cars they have 200 hp to the motor and more like 140 to the wheels loool