Post up your latest purchases!

[SomeGuy]

Finally some furniture for the deck...pretty expensive but lifetime frame warranty, 10 years for colours/fade, 5 years for fabrics (sunbrella)...composite like the decking from CR plastics which is made in Canada (in Stratford actually). Super comfy though and very heavy/solid.

[m_bisson]

I was looking at some chairs from that company. $400, on sale, for one plastic chair. **** that. They're definitely nice, but definitely overpriced.

[SomeGuy]

I was looking at some chairs from that company. $400, on sale, for one plastic chair. **** that. They're definitely nice, but definitely overpriced.

Yup, we spent around $4400 for the set - Sofa, Coffee Table, 2 x Swivel Chairs, 2 x Ottomans including all the cushions + rain covers. Hopefully they last as long as they claim they will. When you compare to what a good living room set costs it doesn't feel quite as bad or when you compare to what the Trex decking cost, same thing.

[m_bisson]

Yup, we spent around $4400 for the set - Sofa, Coffee Table, 2 x Swivel Chairs, 2 x Ottomans including all the cushions + rain covers. Hopefully they last as long as they claim they will. When you compare to what a good living room set costs it doesn't feel quite as bad or when you compare to what the Trex decking cost, same thing.

Well, the store I went to had them all on display outside. So, if they're willing to do that and still give the full warranty, I'm sure they'll be decent.

[SomeGuy]

Well, the store I went to had them all on display outside. So, if they're willing to do that and still give the full warranty, I'm sure they'll be decent.

Was it distinctly patio?

The furniture I purchased was delivered (for "free") new in boxes/packaging. Not display models/inventory, was ordered.

[m_bisson]

Was it distinctly patio?

The furniture I purchased was delivered (for "free") new in boxes/packaging. Not display models/inventory, was ordered.

Forever Furniture in Bayfield.

[SomeGuy]

To complete the furniture, spent a little less money and got a table/chairs set from lowes...was on sale for $400 off, reg $979 on for $579 plus found a save the tax promo code for ordering online and picked up in store.



Also replaced the two lights by the back door from the builder crap to something a little less crappy, only $21/each for the new fixtures but they're an immense improvement. Didn't particularly love any of the $100+ fixtures that made it worth spending any more.

Old and new:



Just new:



And grabbed a few cushions for the couch:

[shift8]

I didn't show my wife but I know she is jealous of your dark window frames.

[SomeGuy]

I didn't show my wife but I know she is jealous of your dark window frames.

LoL why's that?

[shift8]

She just likes the look of black window frames

LoL why's that?

[Booter22]

wife got an iMac for her side business so that was nice and an iPhone 6. was never much of an apple guy but this iMac is beautiful. so now my dad gets my old pc. got new cabin filers for the jeep and Mazda 3.

for the house. about 35 led pot lights. our floor is now on order. railings and cabinet guys are coming this week. so things are coming along nicely.

[shift8]

Oil measurement devices and new filters for engine break in

[ricola]

Oil measurement devices and new filters for engine break in

Nice! My oil pressure gauge saved me the other day!!! Great purchase


Sent from my iPhone using Tapatalk

[shift8]

Nice! My oil pressure gauge saved me the other day!!! Great purchase


Sent from my iPhone using Tapatalk

Plan to eventually get this thing setup as a track car so best know what is going on Just need to figure out an oil distribution block that will sit between the sandwich plate and the oil intercooler.

[ricola]

Plan to eventually get this thing setup as a track car so best know what is going on Just need to figure out an oil distribution block that will sit between the sandwich plate and the oil intercooler.

Nice. Where are you putting the oil intercooler? Out in front of one of the fog lights as to not block the fmic which already blocks the rad?


Sent from my iPhone using Tapatalk

[shift8]

Nice. Where are you putting the oil intercooler? Out in front of one of the fog lights as to not block the fmic which already blocks the rad?


Sent from my iPhone using Tapatalk

I don't have a front mount. Still top mount for the foreseeable future.

[MajesticBlueNTO]

I don't have a front mount. Still top mount for the foreseeable future.

is that the stock power steering cooler? change that before you go to Mosport GP otherwise you'll fry your power steering pump

[ricola]

I don't have a front mount. Still top mount for the foreseeable future.

Gotcha!! Looks good!!


Sent from my iPhone using Tapatalk

[shift8]

is that the stock power steering cooler? change that before you go to Mosport GP otherwise you'll fry your power steering pump

Nope, both power steering and oil intercoolers are upgraded, plus red line hi temp power steering fluid.

[shift8]

is that the stock power steering cooler? change that before you go to Mosport GP otherwise you'll fry your power steering pump

Installed based on your recommendation

[MajesticBlueNTO]

Nope, both power steering and oil intercoolers are upgraded, plus red line hi temp power steering fluid.

nice! which ps cooler did you end up going with?

[shift8]

nice! which ps cooler did you end up going with?

Heh not sure Engine builder sourced a core and some hoses then built it himself.

[G ~ MINI]

New Steering Wheel from Corksport .... OEM base GX steering wheel is starting to look ragged

2.5 Ultra High Flow metal core Cat from Yonaka .... It was either Yonaka or vibrant ...Yonaka was on sale in Jan.
OEMs Cats are old , its time for some new flow.

Stage 1.5 Cams from Moto East .... should add 20 whp and overall a faster rev up & zoom zoom with a updated Tune.

Im going to post a Dyno once its all done...

[Reddie1337]

Purchased a replacement set of shifter cables for the Speed, as well as the heat shield just below the firewall. Was falling apart and rattling.

Cables don't squeak anymore, which is wonderful, and no more rattle of shield while idle at lights or in a drive thru.

[Reddie1337]

Is it something with the forum that I can’t edit my post from last night? @S.F.W.

Just wanted to add this picture