Page 1 of 2 12 LastLast
Results 1 to 25 of 28

Thread: MS3 w/ GTX3076 - 430whp/435wtrq

  1. #1
    Sponsor - Mspeed Tuning & Diagnostics
    Fobio's Avatar
    Join Date
    Jan 2008
    Age
    46
    Posts
    6,742
    Thanks
    663
    Thanked 456 Times in 178 Posts
    Mentioned
    173 Post(s)
    Tagged
    0 Thread(s)

    Smile MS3 w/ GTX3076 - 430whp/435wtrq

    Ever since we have gone big turbo, the MSpeed guys have been in constant discussion about "the next big thing". Here we are and we are now ready to share results with everyone. First, many thanks to CelestSpeed3/Paul for all his hard work, blood, sweat, some tears and time and effort...since June, Paul has been meticulously putting my car together. Eventhough we still have a few things to work on, Paul has put the car back together to the point where we can make some real power and reinvigorate MSpeed and NATOR Canada's efforts in furthering the platform. Second, a ton of thanks also goes out to BlueStreak/Dave for setting me up with his second built motor and sharing his assembly and tuning expertise to ensure this project progressed smoothly up to its completion and dyno. Without these two guys...my NATOR's, this car and the results would not have been achievable. THANK YOU. THANK YOU. THANK YOU!

    As usual, thanks must also go out to Brian and Anthony @ APH is strapping the car on their DynoPak Dyno! =)

    Let's look at the parts of the build [if I miss anything, I will come back to add]:

    2008 MS3
    Forged engine by BlueStreak/Dave
    JBR 3.5" Wide-Path SRI
    Garrett GTX3076 w/ 0.82 AR Tial hotside
    Cobb FMIC coated with black heat dispersant
    CP-e exhaust manifold w/ Tial flange
    CP-e catback exhaust w/ extra resonator
    Tial 44mm external wastegate, dumped
    Tial Q VTA blow-off valve
    Custom 3" catless downpipe
    Custom active oil cooler by CelestSpeed3/Paul
    23psi custom MSpeed hybrid load/boost tune
    Assembly by MSpeed [Paul & Dave]
    All exhaust pieces ceramic coated by Quy's Coating

    430whp/435wtrq with straight pump Ultra94
    *The previous dyno was with the GT3071 stock engine build*





    Due to a minor oil leak from the oil cooler and the fact that the dump tube needs a bit of extending, we have concluded today's tuning on straight pump gas; but there's likely about 10 - 20whp lleft with this setup. We will finalize the straight pump gas tune, then tune for meth, and might even give race gas a try to take it over 500whp.

    Thank you MSF, TM3 and NATOR Canada for all the support throughout the build; all the encouragement and even the doubts have fuelled our journey up to this point and we look forward to showing everyone more of what we can do. Stay tuned for our next update!

    MSpeed Tuning & Diagnostics - The Street Lab is always OPEN FOR BUSINESS
    All Powder & Ceramic Coating @ Quy's Coating . Tires and Wheels @ Simply Tire . Wraps by mleblond @ Seche Media . Dyno'd @ Advance Power House . Professionally Serviced by Jimmy @ Street Performance . Signature Pic by PCLoadLetter . Street Tuned by myself .
    "It is amazing how many drivers, even at the Formula One Level, think that the brakes are for slowing the car down." -- Mario Andretti

  2. The Following 2 Users Say Thank You to Fobio For This Useful Post:

    aZuMi (05-02-2014),mazdaspeedemon3 (05-02-2014)

  3. #2
    Sponsor - GTA Retrofits
    Hyperion's Avatar
    Join Date
    Dec 2010
    Location
    Richmond Hill
    Age
    33
    Posts
    5,855
    Thanks
    229
    Thanked 1,089 Times in 541 Posts
    Mentioned
    252 Post(s)
    Tagged
    1 Thread(s)

    Default Re: MS3 w/ GTX3076 - 430whp/435wtrq

    Modifications? I've forgotten more than I remember. Click here for the list.

  4. #3
    Member Genpu_Mz3's Avatar
    Join Date
    Aug 2012
    Location
    G-Spot
    Posts
    2,154
    Thanks
    398
    Thanked 219 Times in 163 Posts
    Mentioned
    68 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MS3 w/ GTX3076 - 430whp/435wtrq

    wow, that is amazing, goodjob! and congrats!!!! that quite the accomplishment!

  5. #4
    Member breakfasteatre's Avatar
    Join Date
    Jan 2011
    Posts
    1,385
    Thanks
    17
    Thanked 130 Times in 70 Posts
    Mentioned
    35 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MS3 w/ GTX3076 - 430whp/435wtrq

    i said this to paul in person, but i think its worth saying again

    its pretty ****ing impressive that paul had the car ripped apart, rearranged and put back together, and it started no problem.

    Thats badass shit
    Oh damn, that sucks. Oh well, I stopped reading the Speed section because according to certain people only speed owners are allowed to even look at that section.

  6. #5
    #DipItRealGood FD22's Avatar
    Join Date
    Jan 2012
    Location
    Etobicoke/Michigan
    Ride
    E92 335i
    Posts
    10,703
    Thanks
    510
    Thanked 2,231 Times in 1,430 Posts
    Mentioned
    1008 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MS3 w/ GTX3076 - 430whp/435wtrq

    Quote Originally Posted by Hyperion View Post
    ^ This lol

    Awesome job...what a beast!

  7. #6
    Member Elusivellama's Avatar
    Join Date
    Feb 2010
    Ride
    2010 MS3 (black mica)
    Posts
    1,456
    Thanks
    10
    Thanked 12 Times in 10 Posts
    Mentioned
    9 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MS3 w/ GTX3076 - 430whp/435wtrq

    Congrats on getting your car back, Vince! Last I heard, it was undergoing a total conversion to a Prius

    So how does 430whp feel when you're...uh... pushing it?

  8. #7
    Moderator loki's Avatar
    Join Date
    Mar 2011
    Location
    Toronto
    Age
    42
    Posts
    18,049
    Thanks
    1,911
    Thanked 6,154 Times in 3,173 Posts
    Mentioned
    881 Post(s)
    Tagged
    1 Thread(s)

    Default Re: MS3 w/ GTX3076 - 430whp/435wtrq

    Quote Originally Posted by breakfasteatre View Post
    i said this to paul in person, but i think its worth saying again

    its pretty ****ing impressive that paul had the car ripped apart, rearranged and put back together, and it started no problem.

    Thats badass shit
    I never doubted Celestspeed3's ability to get that car back together without a hitch. solid work ethic and attention to detail.

    like you said, Badass shit!

  9. #8
    Sr Member rzapata's Avatar
    Join Date
    Jan 2011
    Location
    Downtown TO
    Posts
    4,502
    Thanks
    191
    Thanked 135 Times in 86 Posts
    Mentioned
    36 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MS3 w/ GTX3076 - 430whp/435wtrq

    Whew.... Just keeps getting better and better.

    There's got to be some sort of recognition/award being the first Canadian MS3 (that I know of) to break the 500hp barrier.

  10. #9
    Ass Raver 6strings's Avatar
    Join Date
    Mar 2010
    Location
    Milky Way
    Age
    37
    Ride
    Vespa
    Posts
    2,829
    Thanks
    374
    Thanked 511 Times in 314 Posts
    Mentioned
    47 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MS3 w/ GTX3076 - 430whp/435wtrq

    yikes.
    I'll put down all my mods here so people will know how cool I am!

  11. #10
    Sr Member
    Join Date
    Sep 2009
    Posts
    5,010
    Thanks
    105
    Thanked 336 Times in 242 Posts
    Mentioned
    129 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MS3 w/ GTX3076 - 430whp/435wtrq

    how come there is never a dyno vid? i would love to hear what these cars sound like during the pulls.
    Quote Originally Posted by Lmmorden View Post
    Costco = good cheap solution
    Just go to automotive and ask to see their nuts
    It's like a buck a nut

  12. #11
    Member Shinglez's Avatar
    Join Date
    Feb 2011
    Location
    East York
    Age
    33
    Ride
    2002 VW GTI
    Posts
    1,834
    Thanks
    6
    Thanked 67 Times in 48 Posts
    Mentioned
    40 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MS3 w/ GTX3076 - 430whp/435wtrq

    Quote Originally Posted by Booter22 View Post
    how come there is never a dyno vid? i would love to hear what these cars sound like during the pulls.
    I know! All these dyno charts are impressive but I'd love to see it and hear it

  13. #12
    Sponsor
    BlueStreak's Avatar
    Join Date
    Oct 2007
    Posts
    1,183
    Thanks
    39
    Thanked 34 Times in 13 Posts
    Mentioned
    34 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MS3 w/ GTX3076 - 430whp/435wtrq


  14. #13
    Moderator loki's Avatar
    Join Date
    Mar 2011
    Location
    Toronto
    Age
    42
    Posts
    18,049
    Thanks
    1,911
    Thanked 6,154 Times in 3,173 Posts
    Mentioned
    881 Post(s)
    Tagged
    1 Thread(s)

    Default Re: MS3 w/ GTX3076 - 430whp/435wtrq

    And yes there are flames coming from the front wheel well

  15. #14
    Sr Member boyracer's Avatar
    Join Date
    May 2008
    Location
    NATOR T.O. Outpost
    Ride
    Vapour Trail
    Posts
    4,588
    Thanks
    621
    Thanked 358 Times in 201 Posts
    Mentioned
    117 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MS3 w/ GTX3076 - 430whp/435wtrq

    never get tired watching that

  16. #15
    Sr Member
    Join Date
    Sep 2009
    Posts
    5,010
    Thanks
    105
    Thanked 336 Times in 242 Posts
    Mentioned
    129 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MS3 w/ GTX3076 - 430whp/435wtrq

    Quote Originally Posted by loki View Post
    And yes there are flames coming from the front wheel well
    stupid question but what is it?

  17. #16
    Moderator Mr Wilson's Avatar
    Join Date
    Jan 2010
    Location
    Toronto
    Posts
    4,621
    Thanks
    1,341
    Thanked 700 Times in 381 Posts
    Mentioned
    227 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MS3 w/ GTX3076 - 430whp/435wtrq

    Screeeeeeamer pipe.
    0.000212524463 gigawatts

  18. #17
    Sponsor - Mspeed Tuning & Diagnostics
    Fobio's Avatar
    Join Date
    Jan 2008
    Age
    46
    Posts
    6,742
    Thanks
    663
    Thanked 456 Times in 178 Posts
    Mentioned
    173 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MS3 w/ GTX3076 - 430whp/435wtrq

    A little update for the non-regulars. OP is here: http://www.torontomazda3.ca/forum/sh...-GTX3076-Build

    Ultra94 + 7gph 50/50 meth + 28psi @ redline...almost done!


  19. #18
    Member CH0SiiN1's Avatar
    Join Date
    May 2012
    Location
    Brantford
    Age
    42
    Ride
    2017 Ram sport
    Posts
    1,799
    Thanks
    2
    Thanked 30 Times in 28 Posts
    Mentioned
    11 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MS3 w/ GTX3076 - 430whp/435wtrq

    Damn!!
    2007 MS3 - Cobb AP - Cobb TI - Cobb intake - 3" catless DP - stage1 tune - Autotech hpfp - RX8 rims - weathertech mats -

  20. #19
    Member mikey32235's Avatar
    Join Date
    Jul 2012
    Location
    Richmond Hill
    Posts
    1,180
    Thanks
    51
    Thanked 30 Times in 22 Posts
    Mentioned
    21 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MS3 w/ GTX3076 - 430whp/435wtrq

    dayum

  21. The Following User Says Thank You to mikey32235 For This Useful Post:

    Fobio (05-01-2014)

  22. #20
    bitch flakes....yummy greyseason's Avatar
    Join Date
    Jun 2012
    Location
    Kitchener
    Age
    33
    Posts
    5,263
    Thanks
    4,260
    Thanked 673 Times in 422 Posts
    Mentioned
    284 Post(s)
    Tagged
    1 Thread(s)

    Default Re: MS3 w/ GTX3076 - 430whp/435wtrq

    Skyactiv Powa

    Corksport | Nextmod | Garage16 | Work | Razo | Tein | Audio Heaven | Broadway | Eurolight | Sony | Kicker | Alpine |

    "everyone you meet is fighting a battle you know nothing about. Be kind. Always"

  23. The Following User Says Thank You to greyseason For This Useful Post:

    Fobio (05-01-2014)

  24. #21
    Sr Member
    Join Date
    Sep 2009
    Posts
    5,010
    Thanks
    105
    Thanked 336 Times in 242 Posts
    Mentioned
    129 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MS3 w/ GTX3076 - 430whp/435wtrq

    Quote Originally Posted by greyseason View Post
    couldnt have said it better myself!

    BEAST MODE!!! for sure.

  25. The Following User Says Thank You to Booter22 For This Useful Post:

    Fobio (05-01-2014)

  26. #22
    Newbie dreadlock's Avatar
    Join Date
    Jun 2009
    Posts
    215
    Thanks
    0
    Thanked 4 Times in 4 Posts
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MS3 w/ GTX3076 - 430whp/435wtrq

    wow...just wow

  27. The Following User Says Thank You to dreadlock For This Useful Post:

    Fobio (05-01-2014)

  28. #23
    Member x_o_k_x's Avatar
    Join Date
    Feb 2008
    Age
    36
    Ride
    Ralliart
    Posts
    2,154
    Thanks
    2
    Thanked 1 Time in 1 Post
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MS3 w/ GTX3076 - 430whp/435wtrq

    Great job, very nice!!

  29. The Following User Says Thank You to x_o_k_x For This Useful Post:

    Fobio (05-02-2014)

  30. #24
    Jr Member miako's Avatar
    Join Date
    Sep 2010
    Location
    Richmond Hill
    Age
    45
    Ride
    C400
    Posts
    829
    Thanks
    177
    Thanked 94 Times in 60 Posts
    Mentioned
    33 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MS3 w/ GTX3076 - 430whp/435wtrq

    Good god......

  31. The Following User Says Thank You to miako For This Useful Post:

    Fobio (05-02-2014)

  32. #25
    Jr Member terapr0's Avatar
    Join Date
    Apr 2011
    Location
    Port Credit
    Posts
    936
    Thanks
    4
    Thanked 25 Times in 12 Posts
    Mentioned
    8 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MS3 w/ GTX3076 - 430whp/435wtrq

    good lord Vince, that thing must be a monster!
    If you ever decide to sell, please let me know

  33. The Following User Says Thank You to terapr0 For This Useful Post:

    Fobio (05-02-2014)

Page 1 of 2 12 LastLast

Similar Threads

  1. MS3 Rear Endlinks to MS3
    By fumoffu in forum Suspension & Brakes
    Replies: 15
    Last Post: 06-03-2012, 04:09 PM
  2. MS3: DSport's Project MS3
    By Fobio in forum MazdaSpeed 3 Forum
    Replies: 3
    Last Post: 05-13-2009, 12:35 PM
  3. GTA MS3- Where'd you get your CAI? Hi-flow cat question for MS3
    By Unoriginalusername in forum Mazda3 General Discussion
    Replies: 6
    Last Post: 04-19-2007, 01:07 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •