Taking it to a shop tomorrow, hopefully it can be patched. Do you have a hook-up?
Picked up two sponsors this season, new basic livery for round 5/ 2018 CSCS Production FWD class. Every little bit helps at this point. I redesigned the BRTS logo to better suit the car, and was super pleased working with Tiago at concept wraps bringing my layout to life.
Concept Wraps - crazy good wraps/livery/design
Burning Rubber Tire and Speed - Killer race shop/tire specialists (they work on everything but they're speciality are track going cars)
Sent from my iPhone using Tapatalk
CSCS Production FWD
Had a smoke test done for boost leak. Found 2 minor problem areas. One being the turbosmart bov. Pulled it apart and gave it a well needed lubing.
Sent from my iPhone using Tapatalk
Strut swap out. Old and busted stock to the new hotness, Bilstein B12. Not much of a drop (sport suspension) but also nothing settled yet. Should just be about perfect if I get somewhere in the 20 to 30mm range.
2008.5 Mazdaspeed 3, CWP
Forged internals + GTX2871r
// Build thread // Instagram: @sleepy.ms3
r4BBiT (09-10-2017)
Also took the other strut apart. The upper strut bearing was toasted (now I know what that noise was)
Ordered two new bearings last night so I'll have to reverse what I did. At least it didn't really take too long.
In Boston now so not a big deal for the wait.
Sent from my LG-H915 using Tapatalk
Last weekend I finally replaced driver side front lca. One of the bolts was really seized and it messed the nut up
Sent from my D6603 using Tapatalk
2010 Mazda 3 GS (daily driver)
2008 Mercedes-Benz C230 4MATIC Sport + Premium Package (wife's car)
1991 Honda Civic Hatchback DX (parted and wrecked)
Installed an LED light bar (eBay)
It for use driving up north to better avoid Moose/deer at night. It Will be used in conjunction with high beams mostly on HWY 60 where I have had a few close calls with animal strikes.
It is BRIGHT
Sent from my ONEPLUS A3000 using Tapatalk
Modifications? I've forgotten more than I remember. Click here for the list.
I use my roofrack too much so it would interfere a little too much. My car has also been vandalized downtown Toronto a few times so I also like that it's behind the bumper. Stealthy. I can always move it up there if it does become an strain on my eyes as there is a lot of extra wiring harness left.
drained my occ. yuck.
Sent from my iPhone using Tapatalk
Bought a dash cam
Sent from my SM-G950W using Tapatalk
Removed RHO plate, relocated plate to the driver's side, mounted right to the bumper.
Cheap used project RHO plate for sale in classifieds.
Sent from my ONEPLUS A3000 using Tapatalk
ricola (09-17-2017)
Ran it in production fwd time attack @CSCS round 5
Sent from my iPhone using Tapatalk
Dave_The_BMXER (09-20-2017),loki (09-20-2017),Mazduh (09-20-2017),Mr Wilson (09-21-2017),natspriceless (09-20-2017),r4BBiT (10-02-2017),S.F.W. (09-19-2017),shift8 (09-20-2017)
Debugged some more electrical gremlins. After resolving the immobilizer issue, had CEL P2122.
Dug around with the voltmeter and found a ground wasn't resolving to 12V from the battery.
Cleaned up a bit or corrosion, scraped some paint away to get better contact to the body, and reseated the acc pedal sensor wiring harness (probably wasn't necessary).
Finally back on the road. Couple of test runs today and a 3rd gear log. Gotta download it to the computer but so far things running well.
Sent from my LG-H915 using Tapatalk
Mr Wilson (09-21-2017)
I finally gave the interior a quick clean. Vacuum, windows, armour all plastics.
Nevermind, I found the answers I was looking for:
Further cleaning: Going to try baking soda +water vinegar solution as well as some gain to get out the stubborn salt/dirt stains out of the carpet and a spot vac to clean the upholstery seats.
Last edited by Kiewan; 09-27-2017 at 09:36 PM.
looked at mine in the drive way as i got into the grand cherokee. wifes taking the 3 today. haha