Modifications? I've forgotten more than I remember. Click here for the list.
Use white LEDs with red VHT paint on them.
Want to do these and footwell lights anybody wanna help?
2013 White Hyundai Genesis coupe premium 2.0T - 3M clear hood wrap - window tint - LED licence plate lights -
Also have extra led for whoever can help me
Open up center console, find red and black wires leading to cigarette lighter.
Attach red wire from LED to Red wire on lighter.
Attach Black wire to a grounding point on the car. All done.
which led's do you order?
these .. http://www.superbrightleds.com/cat/c...ge,3mm,18,166:
?
Got mine from eBay hopefully they are good
The drink holders looks nice but I'm thinking of doing my footwells first though.
2001 Mazda P5 Black - Sold
2005 Mazda 3 GT Black - Sold
2007 MS3 Cosmic Blue Mica
Cobb SF SRI - Cobb AP - Cobb TIH - CP-E TMIC - CP-E HPFP - CP-E DP - CP-E RMM(65A) - JBR TMM(80A) - Forge BPV - EGR Delete - SM OCC - Ford Full Synthetic MT Fluid - 225/40/18 Hankook Ventus V12's - TWM STS + bushings - 8000K HID Fogs - KY + Eibach Prokit Springs - JBR RSB - Rhoplate - Blue LED Interior lights - Black Weathertech liners - Blue SICKSPEED Horns - Blackvue DR400GHD
TBI: Thermal TB and Intake Gasket
Looks decent!
looks sick
I used the 4500mcd RL3-R4545 3mm ones on mine. when you start getting to 8000mcd it's getting really bright. but don't forget you need to buy a stash of resistors from Radio shack (the source) and use a web site to figure out what one to connect BEFORE you power them. You can't simply wire the LEDs from SuperBrightLEDS.com straight to power!
even the ones you see in my avatar (left) in the rear markers and rear lower reflectors - I've soldered resistors onto before wiring them up.
Last edited by Souls; 10-29-2012 at 08:05 PM.
how big a resistor did you use on the ends of the LED
I bought a pack like this: http://www.thesource.ca/estore/produ...roduct=2719018
Then used this: http://led.linear1.org/1led.wiz to figure out what to solder together. it's easy