Hey guys,
I decided to do some logging today. This pull was in 3rd gear. Let me know what you think?
datalog1.csv
Hey guys,
I decided to do some logging today. This pull was in 3rd gear. Let me know what you think?
datalog1.csv
I had the wgd cycled at 50% and then bumped it up to 75% before doing the log. The car actually ran better when I did that change. But then again. I maxed out the waste gate on the log?
Boost or load tuned?
Everything looks fine, but a longer log from lower rpm will be more telling. Try to pull a full 4th gear log before the wknd.
MSpeed Tuning & Diagnostics - The Street Lab is always OPEN FOR BUSINESS
All Powder & Ceramic Coating @ Quy's Coating . Tires and Wheels @ Simply Tire . Wraps by mleblond @ Seche Media . Dyno'd @ Advance Power House . Professionally Serviced by Jimmy @ Street Performance . Signature Pic by PCLoadLetter . Street Tuned by myself .
"It is amazing how many drivers, even at the Formula One Level, think that the brakes are for slowing the car down." -- Mario Andretti
Boost tune and here is a log in 4th gear also. datalog2.csv
To do a log you need to be at 2500 RPM in 4th gear, start logging, go WOT until redline, stop logging, and post. Find a long onramp or empty stretch of highway that you can see a long way. Sometimes best to take a pass before hand looking for coppers.
Edit: Also you dont need to log things like battery voltage and throttle duty.
I Log:
AFR
Boost
Boost Air Temp
Calc Load
DI pressure
Air Intake Temp
Knock Retard
Mass Airflow
Spark Advance
RPM
Throttle Position
Wastegate duty
Throttle Position
Last edited by Snotrocket; 07-29-2011 at 01:09 AM.
Hole In Block Tuning! I'll give you HIB.
2010 MS3 Black395whp/386wtq
| Molnar Rods | CP-e Stage 2 Pistons | Much Head Work | ATP GTX3076 | Tial 38mm EWG | HTP 4 Inch Intake | BSD | Passenger and Rear MM | Denso ITV22's | OCC | Ultimate Racing TBE | Tredstone TR8C FMIC | Tial BPV | Autotech Internals | Grimmspeed ECBS 3 port | Te37 Volks| 245/45/17 Dunlop zzi tires| Cobb AP Self Street Tuned | Sonic Tuning CO's | stoptech breaks and slotted roters |