Results 1 to 6 of 6

Thread: AccessPort Log, all ok?

  1. #1

    Join Date
    Mar 2009
    Location
    Kitchener
    Posts
    5,736
    Thanks
    213
    Thanked 1,156 Times in 643 Posts
    Mentioned
    295 Post(s)
    Tagged
    0 Thread(s)

    Default AccessPort Log, all ok?

    Just got an accessport today...running a stage 1 91 octane map for the cpe CAI with TIH (which is what I have for mods, just intake and inlet). Did a third gear pull and logged it and just want to be sure that everything looks ok.

    http://someforum.net/DataLogs/20110817.csv

  2. #2
    Member Booostin's Avatar
    Join Date
    May 2011
    Location
    Brampton
    Ride
    Your Mom
    Posts
    2,082
    Thanks
    6
    Thanked 23 Times in 13 Posts
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)

    Default Re: AccessPort Log, all ok?

    Nobody can help this guy out? Fobio?


  3. #3
    Member fywdyl's Avatar
    Join Date
    Jun 2010
    Posts
    1,631
    Thanks
    88
    Thanked 105 Times in 64 Posts
    Mentioned
    40 Post(s)
    Tagged
    0 Thread(s)

    Default Re: AccessPort Log, all ok?

    Looks OK, nothing out of the ordinary. Looks like there's a bit of a spike at the beginning of the pull. You might want to try to get a log until redline next time.

    When you get a chance, you should read Abilor's Tuning Guide on MSF (if you plan to do some tuning that is).

    You might want to start with a MAF calibration and then go from there.

  4. #4

    Join Date
    Mar 2009
    Location
    Kitchener
    Posts
    5,736
    Thanks
    213
    Thanked 1,156 Times in 643 Posts
    Mentioned
    295 Post(s)
    Tagged
    0 Thread(s)

    Default Re: AccessPort Log, all ok?

    fywdyl - ya I noticed I've got a bit of spike at the beginning of pulls, is that something to be worried about if it's within the 1-2 psi of targetted?

    And I don't really care about pulling to redline I almost never pull beyond 5000 and maybe 5500 so?

    I read about the MAF calibration, is it that necessary if my ltft and stft's aren't off by much?

  5. #5
    Member fywdyl's Avatar
    Join Date
    Jun 2010
    Posts
    1,631
    Thanks
    88
    Thanked 105 Times in 64 Posts
    Mentioned
    40 Post(s)
    Tagged
    0 Thread(s)

    Default Re: AccessPort Log, all ok?

    Depends what you want to do. If you just want to set it and forget it, then you're pretty much done, esp since you say you don't care for pulling to redline. If you want to start tuning then I really suggest you head over to MSF and read abilor's guide and start from there.

  6. #6
    Banned
    Join Date
    Apr 2010
    Location
    Projects
    Ride
    another mazda
    Posts
    1,976
    Thanks
    67
    Thanked 261 Times in 121 Posts
    Mentioned
    51 Post(s)
    Tagged
    0 Thread(s)

    Default Re: AccessPort Log, all ok?

    Quote Originally Posted by SomeGuy View Post
    fywdyl - ya I noticed I've got a bit of spike at the beginning of pulls, is that something to be worried about if it's within the 1-2 psi of targetted?

    And I don't really care about pulling to redline I almost never pull beyond 5000 and maybe 5500 so?

    I read about the MAF calibration, is it that necessary if my ltft and stft's aren't off by much?
    The only way to properly to determine how the motor is running ok is to pin it on the throttle to redline in 3rd or 4th gear.

Similar Threads

  1. Cobb Accessport on a stock MS3
    By SKYMP3 in forum MazdaSpeed3 Tuning
    Replies: 34
    Last Post: 08-05-2011, 01:43 AM
  2. AccessPORT Dimensions
    By REZXPERT in forum MazdaSpeed3 Modifications
    Replies: 26
    Last Post: 03-28-2008, 04:44 PM
  3. Accessport
    By ramboh in forum MazdaSpeed 3 Forum
    Replies: 5
    Last Post: 03-12-2008, 07:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •