guys with the fmic does anyone have the oem arm piece that the bpv mounts on. I stripped and snapped one of the bolts when swapping my bpv, called the dealership and it's a special order (@ $30). Thought I'd check here first if one is lying around before I order one. Send me a pm if you're willing to part with it; oh yeah and the bolt(s) too please.
I have one. The cold side of the stock intercooler is what you want right? dis one?
400WHP Club!
Gingerbuilt-Self Tuned-Built Short Block yada yada yada-Enkie RPF1 17x9 +45 wrapped with 245/40 PSS
Check out my build thread! http://www.torontomazda3.ca/forum/sh...s-Build-Thread
One of the bolts broke off in this one to I believe. But I can extract it. It's in Peterborough though
It doesn't look like the one I have; mine doesn't have a curve like that. It's the pipe from the oem tmic to the bpv and has 90 degree straight down connector under the bpv
It is indeed from a speed6. They all work the same.
Prezi (08-12-2014)
Come to one of the ones in KW...we're not that far. I think next one will be Aug 23rd
- 2021 Porsche Macan GTS -
- 2016 Lexus NX200t F Sport -
- 2010 Mazdaspeed 3 Black Mica - SOLD -
shift8 (08-13-2014)
Depending on what needs installed I likely have the tools and a garage. Single car though but lots of street parking
2008.5 Mazdaspeed 3, CWP
Forged internals + GTX2871r
// Build thread // Instagram: @sleepy.ms3
Today we are doing a turbo swap, finally getting rid of the BNR turbo. That thing was a royal pain in my ass. After I get that useless crap out of the speed I'm going to douse it with fuel and lighting it on fire. Hahahaha
Hole In Block Tuning! I'll give you HIB.
2010 MS3 Black395whp/386wtq
| Molnar Rods | CP-e Stage 2 Pistons | Much Head Work | ATP GTX3076 | Tial 38mm EWG | HTP 4 Inch Intake | BSD | Passenger and Rear MM | Denso ITV22's | OCC | Ultimate Racing TBE | Tredstone TR8C FMIC | Tial BPV | Autotech Internals | Grimmspeed ECBS 3 port | Te37 Volks| 245/45/17 Dunlop zzi tires| Cobb AP Self Street Tuned | Sonic Tuning CO's | stoptech breaks and slotted roters |
Yes I'm also interested. Sorry I couldn't make it down to lend a hand. I may also have a buyer for that bnr when you decide to part with it @boyracer
which turbo did you replace it with?
mickey_g (09-29-2014),murdaspeed (09-29-2014)
Thats a nice upgrade...I remember @boyracer and I talked about it and he told me he was looking into it
Did you guys ever end up doing a group valve cleaning? I scanned the thread, but honestly I do not have the patience to sift through 102 pages. I saw on MSF that some guys were doing walnut blasting with great results. Anyone try this, and how involved is it?
"A car is just fast enough when you stand in front of it in the morning and are afraid to unlock it" -Walter Rohrl
No, no large group cleanings have be done. @SomeGuy was looking into the media blasting at some point.
0.000212524463 gigawatts
I am going to be hosting a valve cleaning day this spring. Im prob going to borrow @mazdaspeeding 's stuff as he just did his and has lots of extra walnut media left. There are 2 speeds in Peterborough thst are on the list already. Who else is down? Date to be determined.
1. @gerald.gabourie
2. My buddy Chucky
3.
4.
5.