Install Help: HID Reverse Lights

[trulankan]

ok, so i've spent 2-3 hours today trying to get the HID reverse light kit I got from G16 to work. Everything seems pretty straightforward and plug-and-play except for one major thing: the wires from the two bulbs dont have the connectors pre-attached like alot of kits ive seen. I managed to get the red wire (positive) to go into the connector but I cant for the life of me get the blue wire (negative I assume) to go into the connector properly. Anyone know how to get it in? Please let me know as this is the only thing thats preventing it from getting done. If this were pre-connected this whole install would have been 30 mins max! i've tried searching google and youtube but no one has this particle step covered cause it should have come assembled!! no instructions as well!!

here's a pic of whats included in the kit:



Please help! Thanks!

[Hyperion]

The f**k is that s**t.
Send it back.

[trulankan]

The f**k is that s**t.
Send it back.

lol alot of members got it from Rick as well. i dunno, maybe I got a bad one (i wouldnt be surprised)

[leecheefoto]

It usually locks in when you put enough pressure. I don't remember how I did it you just have to look at it. Look in the hole you'll see something that locks the wire in place. If you need help I can help you whenever I'm in the area. I don't know how you can't get it I hooked it up in minutes lol

[n00bMeiSter]

They're supposed to come like that, it saves them from having to make a bunch of different kits. Instead they make one and supply multiple connectors.

However, don't connect anything yet, you need to change the orange piece that holds the bulbs, The one that comes pre-attached is not the right size for our cars.

Trulankan, shoot me a pm and I'll help you install them.

[trulankan]

It usually locks in when you put enough pressure. I don't remember how I did it you just have to look at it. Look in the hole you'll see something that locks the wire in place. If you need help I can help you whenever I'm in the area. I don't know how you can't get it I hooked it up in minutes lol

sure let me know man thanks. its seems like such an easy fix yet just this little thing is getting in the way

[trulankan]

They're supposed to come like that, it saves them from having to make a bunch of different kits. Instead they make one and supply multiple connectors.

However, don't connect anything yet, you need to change the orange piece that holds the bulbs, The one that comes pre-attached is not the right size for our cars.

Trulankan, shoot me a pm and I'll help you install them.

PM'd you

[n00bMeiSter]

PM'd you

replied

[trulankan]

ok so i've installed the HIDs for the reverse with the help of Dave and Jimmy but for some reason only one of the lights will work at a time (either left or right). If both bulbs are connected neither of them will light up. Any idea why this would be happening? do i really have to run a relay to get it working?

[trulankan]

i installed the 15W HID reverse kit i got from eBay today and it works great!! I haven't tried it outside my parking garage yet but the light output is substantially better than stock and the LEDs i've tried. only con would be that it takes about 10s for it to reach full brightness but I dont mind really. I will post up outdoor pics when I get a chance to.




the wiring (i used zip-ties and velcro tape to hold the ballasts)

[gotak]

Next, hids for the cabin lighting. Then hids for gauge lighting and for the dash lighting. A lot of lighting options still open for hids.

[trulankan]

Next, hids for the cabin lighting. Then hids for gauge lighting and for the dash lighting. A lot of lighting options still open for hids.

lol your kidding right? anyway, i need the HIDs for my reverse lights because of my dark tint. it makes a hugggee difference

[FD22]

Nice; glad to see you finally got a working set of HID reverse lights lol. Light output looks pretty bright.

[RedRaptor]

only con would be that it takes about 10s for it to reach full brightness but I dont mind really.

Great job on the install.

But 10 seconds is aong time to be in reverse. One of the reasons I'd prefer LED reverse lights.

[silverstarmazda]

Great job on the install.

But 10 seconds is aong time to be in reverse. One of the reasons I'd prefer LED reverse lights.

what do you have in your reverse? i currently got 68 leds ber bulb but ill be "upgrading" to this

http://www.ebay.ca/itm/2x-102-Led-Sm...#ht_2109wt_956

[RedRaptor]

what do you have in your reverse? i currently got 68 leds ber bulb but ill be "upgrading" to this

http://www.ebay.ca/itm/2x-102-Led-Sm...#ht_2109wt_956

I have stock bulbs right now. I am looking for an upgrade.

[gotak]

lol your kidding right? anyway, i need the HIDs for my reverse lights because of my dark tint. it makes a hugggee difference

Of course I am kidding... LOL. Can you imagine your dash signal indicators being a bright HID lamp? It would be like having a camera flash going off in your face every time you signal.

[Pokaroo Kris]

Of course I am kidding... LOL. Can you imagine your dash signal indicators being a bright HID lamp? It would be like having a camera flash going off in your face every time you signal.

Maybe Hollywood stars would go for it. They're used to constant camera flashing.