Rear motor mount

[SomeGuy]

Check this out, comparison of stock to a cp-e stage 2...more interesting is just the amount of movement of the stock motor mount.

[greyseason]

damn, good video

[ottoyu34]

very cool comparison.

[Nikhil Pali]

Great comparison. Nice video.

[leungalv]

oooooooooooh nice video

[FD22]

Sweet video, and good timing as well, as I got to experience what that change in movement felt like today as well

Definitely a recommended mod from my end. Makes the car just feel so much more connected.

[SomeGuy]

^^ LoL with the shape your PMM was in, you just got a massive upgrade.

[Wisecraker]

Are aftermarket motor mounts worth it for Automatic cars?

[SomeGuy]

Yes.

[Wisecraker]

Yes.

+1 on short and sweet lol. How noticeable is the performance when you get it installed? And how much does it cost to get it installed?

[SomeGuy]

DIY for install. A shop under $100.

You'll get slightly better throttle response, even on an auto, and will keep you from getting wheel hop.

[Wisecraker]

DIY for install. A shop under $100.

You'll get slightly better throttle response, even on an auto, and will keep you from getting wheel hop.

Thanks for the info

[Zuluwun]

Also makes your car louder. I have an intake and only a 62 duro RMM and people ask me once in a while if I have an exhaust.

+1 to reducing wheel hop.

[sarujo]

It's too bad the cpe stage2 RMM (the one in the video above) is only for the Speed3 models It's a vastly superior design to the stage 1 wishbone style.

[greyseason]

It's too bad the cpe stage2 RMM (the one in the video above) is only for the Speed3 models It's a vastly superior design to the stage 1 wishbone style.

I bought the corksport 'race' 70&80dr RMM, and its a gorgeous billet design like the CP-e mount

[SomeGuy]

The stage 2 Cp-e mount actually re-orients the bushing vertically. There aren't any other mounts like it on the market as far as I know. The corksport is like the stage 1 cp-e mount.

[Zuluwun]

Are RMMs not interchangeable between MZ3 and MS3? I have previously had a Speed3 RMM in my car..

[pwdunmore]

Are RMMs not interchangeable between MZ3 and MS3? I have previously had a Speed3 RMM in my car..

Most MZR engines have the same RMM location and fitment, the bracket that it attaches to might be slightly different from model to model.

[Stretch]

It's too bad the cpe stage2 RMM (the one in the video above) is only for the Speed3 models It's a vastly superior design to the stage 1 wishbone style.

I sold my cpe stage 2 to buy a jbr 88 duro. The cpe was not stiff enough, and the jbr could be stiffer. I would be happy with a solid mount.
eric

[sarujo]

That's just a stage 1 RMM - wishbone style RMM like everyone else. The one in this thread is the cpe Stage 2 - totally different design and vastly superior.

I bought the corksport 'race' 70&80dr RMM, and its a gorgeous billet design like the CP-e mount

[SomeGuy]

I sold my cpe stage 2 to buy a jbr 88 duro. The cpe was not stiff enough, and the jbr could be stiffer. I would be happy with a solid mount.
eric

A solid mount in the rear isn't going to stop all engine movement. Get the passenger and transmission mounts too and you'll be happy (or annoyed with the vibes lol).

[greyseason]

That's just a stage 1 RMM - wishbone style RMM like everyone else. The one in this thread is the cpe Stage 2 - totally different design and vastly superior.

upon taking another look, i can definitly see hte difference. Does anybody on here have one they would let another member try out?

[sarujo]

The stage 2 cp-e *only* works for the mazdaspeed3. The tranny bolt pattern is different than the regular 3's.

The stage 2 mount is significantly more expensive as well. Last time I asked cp-e, they had no plans of making a version for the regular 3's.

upon taking another look, i can definitly see hte difference. Does anybody on here have one they would let another member try out?