Page 2 of 3 FirstFirst 123 LastLast
Results 26 to 50 of 60

Thread: 2008.5 CWP MS3 - leifmadsen

  1. #26
    Member shift8's Avatar
    Join Date
    Jun 2013
    Location
    Alliston, ON
    Age
    43
    Ride
    Toyota Highlander Limited
    Posts
    1,255
    Thanks
    927
    Thanked 309 Times in 208 Posts
    Mentioned
    54 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 2008.5 CWP MS3 - leifmadsen

    Been a bit since I've updated here. New parts installed include Damond Motorsports EGR block off and delete. Also installed a set of CorkSport coilovers, and a 5mm spacer plate on the rear wheels. I sold off my Cobb SRI + CorkSport TIP frankenstein setup and replaced it with a JBR SRI (white) + JBR TIP (black). Installed Guardian Angel recently, and bought plate relocation kit from @thrizzle and had it repainted at Roberts Signs and Awnings (wife's family business). Got that installed along with the replace moustache. I recently took off the white carbon fiber vinyl from the hood and had it replaced with matte white vinyl on the hood and roof. Rear hatch is now debadged. I just have to remove the rear wing and have it taken back to Roberts to have the wing and hatch wrapped. Only two other pending installs at this point; Rally Armor black mud flaps with red lettering, and new brake setup (Centric high carbon blanks + EBC yellowstuff).

    Too many words. More pics!

    Before


    After


    Others


    2008.5 Mazdaspeed 3, CWP
    Forged internals + GTX2871r
    // Build thread // Instagram: @sleepy.ms3

  2. The Following 7 Users Say Thank You to shift8 For This Useful Post:

    Cjcoolen (04-18-2016),Kiewan (04-18-2016),MikeTheCheek (04-18-2016),Mr Wilson (04-18-2016),paulabreu (04-19-2016),ricola (04-19-2016),Timotee (04-18-2016)

  3. #27
    Member shift8's Avatar
    Join Date
    Jun 2013
    Location
    Alliston, ON
    Age
    43
    Ride
    Toyota Highlander Limited
    Posts
    1,255
    Thanks
    927
    Thanked 309 Times in 208 Posts
    Mentioned
    54 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 2008.5 CWP MS3 - leifmadsen

    Next up is adjusting the dampers, and waiting for Mrs. 8 to tell me how much she hates the new ride

    Much stiff...

    Sent from my A0001 using Tapatalk

  4. The Following 2 Users Say Thank You to shift8 For This Useful Post:

    MikeTheCheek (04-19-2016),Mr Wilson (04-19-2016)

  5. #28
    Member shift8's Avatar
    Join Date
    Jun 2013
    Location
    Alliston, ON
    Age
    43
    Ride
    Toyota Highlander Limited
    Posts
    1,255
    Thanks
    927
    Thanked 309 Times in 208 Posts
    Mentioned
    54 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 2008.5 CWP MS3 - leifmadsen

    Quick update as I've done a lot of work recently. Here is how it sits as of this week.



    So, the original idea here was to build something that I could street drive daily (take kids to daycare/school) and then periodically autocross, maybe a track day here or there. But things changed over the last few months, and now I have 2 separate daily cars (one for wife, one for me), so now this is my tuner car, and I can't do pretty much whatever I want without having to worry about daily. Some of the parts on the car noted below were done because I was shooting to daily it, and now that it's going to be a "track car", I'm going to have to go back and probably replace some of the new parts...

    Anyways, here we go.

    Parts from the last year

    * Enkei 17x9 +45 (really should have been +48, but these work with some extra help...)
    * Continental ExtremeContact Sport in 245/45 R17
    * 5mm hubcentric spacers with extended hub up front (73mm outer, 67mm inner)
    * 3mm hubcentric spacers in the rear
    * ARP extended studs
    * Muteki SR48 steel open ended lugs
    * new OEM rear trailing arms
    * new OEM endlinks front/rear
    * new OEM hubs rear
    * new thirdparty driver side drive shaft (if you need this done, just go OEM)
    * new OEM pads front/rear
    * new OEM rotors front, Delco rotors rear (I'm probably changing brakes over winter)
    * new Bilstein B12 sport shocks/struts (includes new top hats for front struts as well)

    Had to also do a bunch of electrical work, but all those gremlins seem to be solved now. I was getting VERY low voltage across everything due to a bunch of corrosion in the main fuse box. I've cleaned that up, new fuses, etc and things seem to be a hell of a lot more reliable now. No CEL in quite a while, and things drive quite well.

    Took out the rear SPC adjustable camber arms because the mechanic who put them in originally never set them properly (just popped them in as they sat in the box...). With the arms out, I set the length to stock, and cleaned them up a bit so that they were adjustable again. Some corrosion over the last couple years caused them to seize up a bit.

    Been learning a lot about how to work on these cars. Did a compression test (180-155-160-175) across the cyilinders. Did a leak down test, and it seems like it's coming from the intake side (no leaking into the oil cap, no bubbles in the coolant, no sounds from the exhaust). Have Corksport injector seals sitting in my cupboard for now. Will install over the winter, and clean the valves. We're going to see if there are things that can be done to clean up some of the compression numbers without immediately assuming every compression problem is ringlands. We'll see if that can be the case in these cars

    TODO:

    * remove rear wing, wrap rear hatch, reinstall rear wing
    * alignment
    * injector seal install (compression test, leak down test)
    * valve clean (compression test, leak down test)
    * check turbo and seals, possibly replace with new/used K04
    * dyno tune
    * lots of practice in the simulator and look for an instructor to prep for first season of time attack

    Some more pictures of work I've done over the last little bit.


    Big pictures here: https://leifmadsen.imgur.com/all/

  6. The Following User Says Thank You to shift8 For This Useful Post:

    Mr Wilson (10-30-2017)

  7. #29
    Member CH0SiiN1's Avatar
    Join Date
    May 2012
    Location
    Brantford
    Age
    42
    Ride
    2017 Ram sport
    Posts
    1,799
    Thanks
    2
    Thanked 30 Times in 28 Posts
    Mentioned
    11 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 2008.5 CWP MS3 - leifmadsen

    looking good!! Love the rpf1's
    2007 MS3 - Cobb AP - Cobb TI - Cobb intake - 3" catless DP - stage1 tune - Autotech hpfp - RX8 rims - weathertech mats -

  8. The Following User Says Thank You to CH0SiiN1 For This Useful Post:

    shift8 (10-30-2017)

  9. #30
    Member shift8's Avatar
    Join Date
    Jun 2013
    Location
    Alliston, ON
    Age
    43
    Ride
    Toyota Highlander Limited
    Posts
    1,255
    Thanks
    927
    Thanked 309 Times in 208 Posts
    Mentioned
    54 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 2008.5 CWP MS3 - leifmadsen

    Here we go...

  10. The Following User Says Thank You to shift8 For This Useful Post:

    Mr Wilson (02-27-2018)

  11. #31
    Member
    Join Date
    May 2012
    Posts
    1,431
    Thanks
    30
    Thanked 165 Times in 115 Posts
    Mentioned
    53 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 2008.5 CWP MS3 - leifmadsen

    Do I see an engine being pulled?!?!?

  12. #32
    Member shift8's Avatar
    Join Date
    Jun 2013
    Location
    Alliston, ON
    Age
    43
    Ride
    Toyota Highlander Limited
    Posts
    1,255
    Thanks
    927
    Thanked 309 Times in 208 Posts
    Mentioned
    54 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 2008.5 CWP MS3 - leifmadsen

    Quote Originally Posted by pwdunmore View Post
    Do I see an engine being pulled?!?!?
    That is a very real possibility.

  13. #33
    Member shift8's Avatar
    Join Date
    Jun 2013
    Location
    Alliston, ON
    Age
    43
    Ride
    Toyota Highlander Limited
    Posts
    1,255
    Thanks
    927
    Thanked 309 Times in 208 Posts
    Mentioned
    54 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 2008.5 CWP MS3 - leifmadsen

    Today's progress (I'm not doing the work)


  14. The Following 3 Users Say Thank You to shift8 For This Useful Post:

    cwp_sedan (02-28-2018),MikeTheCheek (02-28-2018),Mr Wilson (02-27-2018)

  15. #34
    Newbie Rezurexun's Avatar
    Join Date
    Jan 2018
    Location
    Toronto, Ontario
    Age
    34
    Posts
    55
    Thanks
    1
    Thanked 4 Times in 4 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 2008.5 CWP MS3 - leifmadsen

    I love seeing a car get torn apart and put back together with greater potential. What are your short term and long term plans?

    Sent from my SM-G900W8 using Tapatalk

  16. #35
    Member shift8's Avatar
    Join Date
    Jun 2013
    Location
    Alliston, ON
    Age
    43
    Ride
    Toyota Highlander Limited
    Posts
    1,255
    Thanks
    927
    Thanked 309 Times in 208 Posts
    Mentioned
    54 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 2008.5 CWP MS3 - leifmadsen

    Quote Originally Posted by Rezurexun View Post
    I love seeing a car get torn apart and put back together with greater potential. What are your short term and long term plans?
    Short term plans are basically engine build for purposes of reliable track usage. I won't be attempting max HP with this car, and it will probably come off the street in favour of a trailer come end of summer (I might as well bring it around to a few meets before I take it off the road ). Long term plans are uncertain. The short term plans may be mostly it in terms of what I do to the car, or I may go full racecar and strip the interior and install a rollcage. Hard to say at this point.

    Short term though, the build will include:

    * ACT 6 puck with 16lbs flywheel
    * GTX2871 turbo
    * K1 rods + Wiseco pistons
    * ARP head and main studs
    * VVT kit, gaskets, etc
    * Balance shaft delete
    * power steering and oil intercoolers
    * AC delete [pending, undecided]

    Just waiting for the clutch kit to arrive, and then the kit, crankshaft, and block are heading to the machine shop for clean up and balancing. Once they get back, then we'll see where we're at

    Created a new instagram account if anyone wants to follow along. I probably won't post *everything* here, just some highlights.

    @Sleepy.ms3

  17. #36
    Member
    Join Date
    May 2012
    Posts
    1,431
    Thanks
    30
    Thanked 165 Times in 115 Posts
    Mentioned
    53 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 2008.5 CWP MS3 - leifmadsen

    Quote Originally Posted by shift8 View Post
    Short term plans are basically engine build for purposes of reliable track usage. I won't be attempting max HP with this car, and it will probably come off the street in favour of a trailer come end of summer (I might as well bring it around to a few meets before I take it off the road ). Long term plans are uncertain. The short term plans may be mostly it in terms of what I do to the car, or I may go full racecar and strip the interior and install a rollcage. Hard to say at this point.

    Short term though, the build will include:

    * ACT 6 puck with 16lbs flywheel
    * GTX2871 turbo
    * K1 rods + Wiseco pistons
    * ARP head and main studs
    * VVT kit, gaskets, etc
    * Balance shaft delete
    * power steering and oil intercoolers
    * AC delete [pending, undecided]

    Just waiting for the clutch kit to arrive, and then the kit, crankshaft, and block are heading to the machine shop for clean up and balancing. Once they get back, then we'll see where we're at

    Created a new instagram account if anyone wants to follow along. I probably won't post *everything* here, just some highlights.

    @Sleepy.ms3
    If you don't plan to pass 500hp, the stock head and crank studs will hold all that power. Freektune has done a lot of testing on them.
    You just need to make sure the engine builder follows the mazda torque procedure on them.

    Not sure what your plan for fueling is because that may become an issue. If you plan to keep the TMIC I would get some methanol in your life.

  18. #37
    Jr Member MikeTheCheek's Avatar
    Join Date
    Sep 2013
    Location
    Mississauga
    Posts
    372
    Thanks
    142
    Thanked 135 Times in 90 Posts
    Mentioned
    26 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 2008.5 CWP MS3 - leifmadsen

    Quote Originally Posted by pwdunmore View Post
    Not sure what your plan for fueling is because that may become an issue. If you plan to keep the TMIC I would get some methanol in your life.
    ^
    and if you need a hook up for buying meth hit me up

  19. The Following User Says Thank You to MikeTheCheek For This Useful Post:

    shift8 (03-02-2018)

  20. #38
    Member shift8's Avatar
    Join Date
    Jun 2013
    Location
    Alliston, ON
    Age
    43
    Ride
    Toyota Highlander Limited
    Posts
    1,255
    Thanks
    927
    Thanked 309 Times in 208 Posts
    Mentioned
    54 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 2008.5 CWP MS3 - leifmadsen

    Quote Originally Posted by pwdunmore View Post
    If you don't plan to pass 500hp, the stock head and crank studs will hold all that power. Freektune has done a lot of testing on them.
    You just need to make sure the engine builder follows the mazda torque procedure on them.

    Not sure what your plan for fueling is because that may become an issue. If you plan to keep the TMIC I would get some methanol in your life.
    Just gonna replace the studs while I'm there as it'll just result in some future proofing, and might as well while I'm doing it. I'm hoping not to have to tear it down again

    Fueling shouldn't be an issue for now. I don't plan to run much past about 300WHP, and if I was gonna go crazy later, I'd just (lolz.... just....) add some port injection to the equation for fueling purposes.

  21. #39
    Newbie murdaspeed's Avatar
    Join Date
    Jun 2011
    Location
    SW Brampton
    Age
    45
    Posts
    193
    Thanks
    36
    Thanked 96 Times in 61 Posts
    Mentioned
    15 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 2008.5 CWP MS3 - leifmadsen

    Just gave you a follow on IG. Doing a similar build myself.

    Tuning by MSPEED Tuning & Diagnostics
    29psi

  22. The Following 2 Users Say Thank You to murdaspeed For This Useful Post:

    Mr Wilson (03-02-2018),shift8 (03-02-2018)

  23. #40
    Member
    Join Date
    May 2012
    Posts
    1,431
    Thanks
    30
    Thanked 165 Times in 115 Posts
    Mentioned
    53 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 2008.5 CWP MS3 - leifmadsen

    Quote Originally Posted by shift8 View Post
    Just gonna replace the studs while I'm there as it'll just result in some future proofing, and might as well while I'm doing it. I'm hoping not to have to tear it down again

    Fueling shouldn't be an issue for now. I don't plan to run much past about 300WHP, and if I was gonna go crazy later, I'd just (lolz.... just....) add some port injection to the equation for fueling purposes.
    I have a set of ARP main studs you can have if you haven't bought them already. BNIB.

  24. #41
    Member shift8's Avatar
    Join Date
    Jun 2013
    Location
    Alliston, ON
    Age
    43
    Ride
    Toyota Highlander Limited
    Posts
    1,255
    Thanks
    927
    Thanked 309 Times in 208 Posts
    Mentioned
    54 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 2008.5 CWP MS3 - leifmadsen

    Quote Originally Posted by pwdunmore View Post
    I have a set of ARP main studs you can have if you haven't bought them already. BNIB.
    Have or buy?

  25. #42
    Member
    Join Date
    May 2012
    Posts
    1,431
    Thanks
    30
    Thanked 165 Times in 115 Posts
    Mentioned
    53 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 2008.5 CWP MS3 - leifmadsen

    You can have them if you want to pick them up. @shift8

    Bought them for my first engine build and found out I didn't need them. I tried to sell them last year on the forum but no one needed them. My loss your gain.

  26. The Following User Says Thank You to pwdunmore For This Useful Post:

    shift8 (03-04-2018)

  27. #43
    Member shift8's Avatar
    Join Date
    Jun 2013
    Location
    Alliston, ON
    Age
    43
    Ride
    Toyota Highlander Limited
    Posts
    1,255
    Thanks
    927
    Thanked 309 Times in 208 Posts
    Mentioned
    54 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 2008.5 CWP MS3 - leifmadsen

    Welp, downpipe and resonated testpipe ordered today from Ultimate Racing. Next up is purchase of a GTX2867 + JBR 3" intake. That should pretty much do it for parts until after the build is completed. Sounds like assembly should start in about 1.5 to 2 weeks. I'm hoping to be on the road by June.

  28. The Following User Says Thank You to shift8 For This Useful Post:

    ricola (04-06-2018)

  29. #44
    Jr Member MikeTheCheek's Avatar
    Join Date
    Sep 2013
    Location
    Mississauga
    Posts
    372
    Thanks
    142
    Thanked 135 Times in 90 Posts
    Mentioned
    26 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 2008.5 CWP MS3 - leifmadsen

    Be a big boy, go 3.5"!

  30. The Following 2 Users Say Thank You to MikeTheCheek For This Useful Post:

    pwdunmore (04-06-2018),ricola (04-06-2018)

  31. #45
    Member shift8's Avatar
    Join Date
    Jun 2013
    Location
    Alliston, ON
    Age
    43
    Ride
    Toyota Highlander Limited
    Posts
    1,255
    Thanks
    927
    Thanked 309 Times in 208 Posts
    Mentioned
    54 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 2008.5 CWP MS3 - leifmadsen

    Quote Originally Posted by MikeTheCheek View Post
    Be a big boy, go 3.5"!
    Ok fine.

    GTX2871r + 4" TIP + 3.5" SRI.

  32. #46
    Member shift8's Avatar
    Join Date
    Jun 2013
    Location
    Alliston, ON
    Age
    43
    Ride
    Toyota Highlander Limited
    Posts
    1,255
    Thanks
    927
    Thanked 309 Times in 208 Posts
    Mentioned
    54 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 2008.5 CWP MS3 - leifmadsen

    Reassembly happening. Hoping engine reassembled by end of the week.

  33. The Following 3 Users Say Thank You to shift8 For This Useful Post:

    MikeTheCheek (04-24-2018),Mr Wilson (04-24-2018),ricola (04-24-2018)

  34. #47
    Member shift8's Avatar
    Join Date
    Jun 2013
    Location
    Alliston, ON
    Age
    43
    Ride
    Toyota Highlander Limited
    Posts
    1,255
    Thanks
    927
    Thanked 309 Times in 208 Posts
    Mentioned
    54 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 2008.5 CWP MS3 - leifmadsen

    It's been a bit slower going than I'd like, but hey, that's the nature of builds that you're not doing yourself (not that I'd have it done any faster alone...). Making progress. The engine is mounted back in the bay. We're just waiting in the intercooler parts for the power steering and oil to arrive, along with a new sandwich plate that has a return line for the oil. Here is the current progress (not shown, car mounted in the bay because poor quality image).







  35. The Following 2 Users Say Thank You to shift8 For This Useful Post:

    Mr Wilson (06-20-2018),ricola (06-20-2018)

  36. #48
    Member shift8's Avatar
    Join Date
    Jun 2013
    Location
    Alliston, ON
    Age
    43
    Ride
    Toyota Highlander Limited
    Posts
    1,255
    Thanks
    927
    Thanked 309 Times in 208 Posts
    Mentioned
    54 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 2008.5 CWP MS3 - leifmadsen

    So update to the build as it stands.

    IT'S DONE(ish). I mean, nothing is ever done, but it's passed a milestone.

    So engine is together, and the final gremlins (some clunking sounds from the mounts) have been addressed. Next steps are oil temp and pressure gauges installed and mounted, followed by dyno tune.

    Engine built by Victor Schmitt @ Schmitt Tuning in Cookstown, ON. Highly recommended.

    Current build includes:

    [Engine]
    * engine build w/ forged internals using K1 rods and Wiseco pistons (stock compression), new bearings
    * ATP GTX2871R turbo
    * all new gaskets plus Cometic head gasket
    * ARP head and main studs
    * balance shaft delete + JBR oil pan baffle
    * head cleaning including runners and valve lapping
    * Ultimate Racing catless downpipe (wrapped + secondary bung)
    * Ultimate Racing resonated test pipe (+ secondary bung)
    * Stock MS3 post-test pipe exhaust

    [Transmission]
    * ACT 6 puck clutch + single mass flywheel
    * Ford Synchromesh fluid

    [Suspension + Mounts]
    * Bilstein B12 Pro-Kit suspension
    * Damond tri-motor mount
    * new rear trailing arms
    * ARP extended studs

    [Brakes]
    * G-Loc R8 pads front and rear (street)
    * G-Loc R12 pads front, R8 rear (track)
    * stock rotors (new)
    * Damond brake caliper bushings (not yet installed)

    [Wheels]
    * hub centric 5mm spacers w/ hub extension and Muteki open ended lugs
    * Enkei RPF1 17x9 offset +45
    * Continental ExtremeContact 245/45R17

    [Cooling]
    * Moroso oil intercooler
    * Moroso power steering intercooler
    * Moroso sandwich plate + spin on oil filter conversion
    * Redline high temp power steering fluid

    [Miscellaneous]
    * AC delete via Dorman pulley
    * heating core delete
    * Saikou-Michi oil catch can
    * Damond EGR block off and delete
    * Stratified Guardian Angel v1
    * Stratified 3-port EBCS
    * Bosche 3 bar MAP sensor

    [To Do]
    * driver mods
    Last edited by shift8; 07-24-2018 at 05:26 PM. Reason: Added MAP sensor upgrade, cooling changes

  37. The Following 3 Users Say Thank You to shift8 For This Useful Post:

    Kiewan (07-25-2018),Mr Wilson (07-25-2018),rickscw (07-24-2018)

  38. #49
    Member shift8's Avatar
    Join Date
    Jun 2013
    Location
    Alliston, ON
    Age
    43
    Ride
    Toyota Highlander Limited
    Posts
    1,255
    Thanks
    927
    Thanked 309 Times in 208 Posts
    Mentioned
    54 Post(s)
    Tagged
    0 Thread(s)

    Smile Re: 2008.5 CWP MS3 - leifmadsen


  39. #50
    Noob rickscw's Avatar
    Join Date
    Sep 2015
    Posts
    10
    Thanks
    11
    Thanked 7 Times in 6 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: 2008.5 CWP MS3 - leifmadsen

    Quote Originally Posted by shift8 View Post
    That head gasket ❤️❤️


    Sent from my iPhone using Tapatalk

  40. The Following User Says Thank You to rickscw For This Useful Post:

    shift8 (07-24-2018)

Page 2 of 3 FirstFirst 123 LastLast

Similar Threads

  1. leungalv's 2008 HB CWP
    By leungalv in forum Member Rides
    Replies: 30
    Last Post: 07-16-2015, 09:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •