Meth nozzle size!?
I'd like to hook up a meth kit this summer once I drop in my built engine. Need some insight into wmi nozzle size. Should be able to reach the mid 500whp mark on 94 and meth with my setup. I've followed a few other builds in the states and have shown some serious power without aux fuel. So let's see what we can figure out
Thanks in advance!
T
400WHP Club!
Gingerbuilt-Self Tuned-Built Short Block yada yada yada-Enkie RPF1 17x9 +45 wrapped with 245/40 PSS
Check out my build thread! http://www.torontomazda3.ca/forum/sh...s-Build-Thread
Re: Meth nozzle size!?
what % of meth/water you plan on using?
"There is no path to happiness: Happiness is the path " ~Buddha
"And so you touch this limit, something happens and you suddenly can go a little bit further. With your mind power, your determination, your instinct, and the experience as well, you can fly very high." - Ayrton Senna
"There is nothing noble in being superior to your fellow man: true nobility is being superior to your former self" -Ernest Hemingway
Re: Meth nozzle size!?
Fiddy/fiddy
Re: Meth nozzle size!?
Perhaps some in tank meth for a hot map
Re: Meth nozzle size!?
You are gonna need somewhere around 800cc/min of additional fueling. That is assuming out stock injectors are 1200 cc.
I think that leaves you the option of two d10 or maybe one d14 depending on your IDC.
How are you injecting it? Throttle body plate?
Re: Meth nozzle size!?
http://edgeautosport.com/manufacture...d-6-2006-2013/
There is actually some info on the stock injector capacity and fueling in the description of this fueling kit.
Posting Permissions
Reply With Quote