Results 1 to 8 of 8

Thread: MikeTheCheek logs

  1. #1
    Jr Member MikeTheCheek's Avatar
    Join Date
    Sep 2013
    Location
    Mississauga
    Posts
    366
    Thanks
    134
    Thanked 127 Times in 85 Posts
    Mentioned
    26 Post(s)
    Tagged
    0 Thread(s)

    Default MikeTheCheek logs

    Had to replace the turbo due to a broken compressor wheel. Went with the Corksport turbo and now being tuned by Freektune. Car is a 2007 Mazdaspeed3, mod list is as follows

    Mod List:
    Cobb SF Intake
    cpe TIP
    cpe RMM
    cpe HPFP
    cpe FMIC
    cpe catted DP
    HKS 3" CBE
    Corksport Turbo
    Corksport Radiator Shrouds
    Corksport EBCS
    Corksport 3.5 Bar MAP sensor
    Cobb AP V3
    55000km on the dot at time of turbo install and tuning process beginning.

    I'm not going to be posting the logs from the base map. I will begin with the 1st revision.

    datalog2.csvdatalog3.csvdatalog4.csv Datalog 4 was done on a slight turn in the road causing the lower numbers.

    V Dyno graph


  2. The Following 2 Users Say Thank You to MikeTheCheek For This Useful Post:

    KidRambo (05-25-2016),Timotee (05-25-2016)

  3. #2
    Member
    Join Date
    May 2012
    Posts
    1,360
    Thanks
    24
    Thanked 143 Times in 96 Posts
    Mentioned
    51 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MikeTheCheek logs

    Looks like fun pulling all the to redline, the final revision will be a beast I am sure. Justin/Freektune have a lot of experience with the platform.

  4. #3

    Join Date
    Mar 2009
    Location
    Kitchener
    Posts
    5,671
    Thanks
    212
    Thanked 1,109 Times in 620 Posts
    Mentioned
    286 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MikeTheCheek logs

    Re-do your plot with Smoothing 3 and CF 1.01 as per standard. Also put your occupant weight in.

    You're really only making ~300whp, not 330whp.
    - 2016 Lexus NX200t F Sport -
    - 2010 Mazdaspeed 3 Black Mica - SOLD -

  5. #4
    Jr Member MikeTheCheek's Avatar
    Join Date
    Sep 2013
    Location
    Mississauga
    Posts
    366
    Thanks
    134
    Thanked 127 Times in 85 Posts
    Mentioned
    26 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MikeTheCheek logs

    Quote Originally Posted by SomeGuy View Post
    Re-do your plot with Smoothing 3 and CF 1.01 as per standard. Also put your occupant weight in.

    You're really only making ~300whp, not 330whp.
    Yep already found that out on MSF. Will be re doing it when I get home

  6. #5
    Jr Member MikeTheCheek's Avatar
    Join Date
    Sep 2013
    Location
    Mississauga
    Posts
    366
    Thanks
    134
    Thanked 127 Times in 85 Posts
    Mentioned
    26 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MikeTheCheek logs

    Here is the more accurate graph using datalog3


  7. #6
    Jr Member MikeTheCheek's Avatar
    Join Date
    Sep 2013
    Location
    Mississauga
    Posts
    366
    Thanks
    134
    Thanked 127 Times in 85 Posts
    Mentioned
    26 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MikeTheCheek logs

    Got the second revision in my email yesterday and had some time to do the data logs tonight. The power definitely hits you harder than before but still comes on nice and smooth.

    Attached Files Attached Files

  8. The Following User Says Thank You to MikeTheCheek For This Useful Post:

    KidRambo (06-02-2016)

  9. #7
    Jr Member MikeTheCheek's Avatar
    Join Date
    Sep 2013
    Location
    Mississauga
    Posts
    366
    Thanks
    134
    Thanked 127 Times in 85 Posts
    Mentioned
    26 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MikeTheCheek logs

    Revision 3 came in so here are the logs. Not sure why log1 came out the way it did, I thought it was the best log when I did it but if someone with more knowledge than me can chime in go right ahead! I will say the car may have been a bit heavier than other days as the trunk was a bit more full if it makes any difference...

    Attached Files Attached Files

  10. #8
    Jr Member MikeTheCheek's Avatar
    Join Date
    Sep 2013
    Location
    Mississauga
    Posts
    366
    Thanks
    134
    Thanked 127 Times in 85 Posts
    Mentioned
    26 Post(s)
    Tagged
    0 Thread(s)

    Default Re: MikeTheCheek logs

    Lost access to v Dyno for computer reasons so I won't be able to post the final graphs. Tune was finished a couple weeks ago just haven't gotten around to updating the thread. According to Justin the power is about 330-340whp and 350wtq. If I choose to upgrade to a 3.5 or 4" intake he said I would likely only see gains of about 5-10whp. From some reading I've done recently it appears the CS turbo has issues with boost spikes when running a 3.5" intake or bigger. Corksport is working on a fix for this so we will see when ever that decides to be released.

    Car feels great, pulls strong, boost goes right through the whole power band with no tapering off. In regular conditions it is peaking at 23psi.

Similar Threads

  1. jonathan13's logs
    By Jonathan13 in forum MazdaSpeed3 Tuning
    Replies: 2
    Last Post: 11-30-2015, 05:47 PM
  2. My Logs
    By Booostin in forum MazdaSpeed3 Tuning
    Replies: 45
    Last Post: 10-17-2012, 02:16 PM
  3. Thrizzl3's logs
    By Thrizzl3 in forum MazdaSpeed3 Tuning
    Replies: 18
    Last Post: 06-08-2012, 05:07 AM
  4. caq's logs
    By caquricon in forum MazdaSpeed3 Tuning
    Replies: 0
    Last Post: 10-18-2011, 01:44 PM
  5. Some DH logs
    By TriniFyah7 in forum MazdaSpeed3 Tuning
    Replies: 0
    Last Post: 10-14-2011, 02:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •