Suggest rims for a 08 Mz3 sedan

[ZimZamTheFlimFlam]

Any clean looking rims for an 08 Mz3 sedan? I was thinking rx8 rims but other suggestions don't hurt. I want a clean look, nothing too aggressive or ricey. Thanks.

Sent from my ONE A2005 using Tapatalk

[BMcC619]

Any clean looking rims for an 08 Mz3 sedan? I was thinking rx8 rims but other suggestions don't hurt. I want a clean look, nothing too aggressive or ricey. Thanks.

Sent from my ONE A2005 using Tapatalk

i like the gen 2 speed wheels, i think its a good look for the sedan and is not as common as the rx8 rims

[ElChino]

i got rx8s I may wanna sell, let me know

[ZimZamTheFlimFlam]

i got rx8s I may wanna sell, let me know

Any rubber mounted on?


Sent from my ONE A2005 using Tapatalk

[Kiewan]

OEM Mazda wheels can be pretty cheap which leaves room for refinishing / powdercoating

I have had and recommend:
17" mazda 3 GT wheels -very safe fitment
17" 1st gen Mazda 6 5 spokes (x2) -very safe fitment
18" RX-8 wheels. Sat flush with fenders, no rubbing on prokits
Next: 2nd gen OEM speed wheels.

[ElChino]

Any rubber mounted on?


Sent from my ONE A2005 using Tapatalk

currently have falken ze912s on them, but will need replacing soon

[ZimZamTheFlimFlam]

currently have falken ze912s on them, but will need replacing soon

Send me pics so I can see what the tires are like and if the rims have too much curb rash. Little nics here and there are fine. Just wanna see if they're worth checking out /:

Sent from my ONE A2005 using Tapatalk

[Karmaspeed]

I have a set of rims from sale here

http://www.torontomazda3.ca/forum/sh...-Part-out-sale

And no one has a set like these; scroll down to see what it looks like on a car

[Dallas87]

OEM Mazda wheels can be pretty cheap which leaves room for refinishing / powdercoating

I have had and recommend:
17" mazda 3 GT wheels -very safe fitment
17" 1st gen Mazda 6 5 spokes (x2) -very safe fitment
18" RX-8 wheels. Sat flush with fenders, no rubbing on prokits
Next: 2nd gen OEM speed wheels.

Totall agree if your going for a clean look, oem wheels generally suit the geometry of the car , especially if you get rims that are from the same generation.

I highly suggest gen 1 or gen 2 MS3 wheels, safe fitment on gen 1-3 (I've had them on all three gens) and they really suit the car. Just had to throw in spacers for that flush look.

I'm selling a set of gen2 MS3 rims for $200 ( pretty bad curb rash on one of the wheels) but no bends or cracks. Good if you are interested in refinishing . pm me



My gen2 Gs had Ms3 gen 1 rims
My gen1 MS3 had 2016 GT rims
And gen2 ms3 had stock rims






Sent from my iPhone using Tapatalk

[groovin]

Seen those gen 2 MS3 wheels and those are nice even in person. Or some of kind of KMC or Moto Metal wheels should compliment the Mz3 sedans.