Can you put MS3 rear Sway bar links on regular 3 (second gen)? As far as I read MS3 endlinks have 12mm shafts vs 10mm for MZ3...could I just drill 2mm out of my stock Rsb?
Sent from my D6603 using Tapatalk
Can you put MS3 rear Sway bar links on regular 3 (second gen)? As far as I read MS3 endlinks have 12mm shafts vs 10mm for MZ3...could I just drill 2mm out of my stock Rsb?
Sent from my D6603 using Tapatalk
2010 Mazda 3 GS (daily driver)
2008 Mercedes-Benz C230 4MATIC Sport + Premium Package (wife's car)
1991 Honda Civic Hatchback DX (parted and wrecked)
2010 Black Mazdaspeed 3 - Lightly modded
That would probably take a lot of work. The sway bar is a very heavy piece of metal. I do not see a reason to drill them? It's the same style of link. Is there a reason you don't want to replace with the same size?
And of course I'd get tagged. I work on these enough eh @S.F.W.
Current: 2012 Mazdaspeed3 Tech CWP
Mods to Date:
Custom Halo headlights, DRL delete, Kenwood DNX890HD, Kenwood KFC-3009 x2(12"), Kenwood 1800Watt Amp, LED interior lights, LED switchbacks, LED fogs.
Previous:2012 Mazda 3 Sky-GS in CWP, 2012 16W Mazda 3 GT Hatch SOLD, 2010 CWP Mazda 3 GT Hatchback SOLD, 2009 Metropolitan Grey Mazda 3 GT Hatch SOLD, 2007 Carbon Grey Mica Mazda 3 GS Hatch SOLD
MS3 endlinks are beefier so that is the reason. How does that work with upgraded Rsb on MZ3, you keep you stock endlinks with smaller shafts or you would need to get ms3 links then?
Sent from my D6603 using Tapatalk
I've had stock end links on my mz3 with a MS3 rear sway for 9 years. All I did was have some spacers made for them and that took up any slack. They have yet to break. *knock on wood*
http://s210.photobucket.com/user/cwp...pacer.jpg.html
r4BBiT (09-05-2017)
i bought some MS3 endlink from Rockauto, priced really well, check them out, no surprise at my door delivery as well.
I bought moog end links for mazda 3, forgetting that i have jbr sway bar ( ms3 spec). So what i ended up with was some clunking over small bumps since theres a gap.