Anyone know how much it costs to repair (straighten) a bent rim? I hit a curb a few months back and if the rim can be straightened, it might be cheaper than purchasing a new one. I know it can be resurfaced.
Anyone know how much it costs to repair (straighten) a bent rim? I hit a curb a few months back and if the rim can be straightened, it might be cheaper than purchasing a new one. I know it can be resurfaced.
Sunlight Silver
2004 Mazda 3 GT 5MT
GFX package
Throttlebody mod
35%/25% tints
VG Sharkfin antenna
Clearshield bra
Rotora slotted rotors Front and Rear
EBC Greenstuff pads Front and Rear
H&R Sport Springs
is this an oem rim?....if it is, i would rather get a used one off of someone for slightly more if not the same amount that it would take to straighten and resurface it
http://www.carcone.com
Best known in the GTA with p/u and delivery.
check their price over a used OEM wheel or Dlrship wheel and see which will rape you less.
The above comments were solely of CarDemon. They may not fully represent the TM3 Club Board, etiquette and belief system. However, a great degree of tact was taken into consideration to allow for creativity, humour and individual self expression.
Oh yeah check out this thread for TOYOTANATION about your issue.
http://www.toyotanation.com/forum/showthread.php?s=&threadid=14725
The cost to repair a bent rim might be the same if you purchased a NEW rim.
2004 Mazda3 -GT GFX Sedan
Lava Orange
might be cheaper AND safer to get a new one.. if they heat the rim to straighten it that could cause weakening of the material, but i\'m no expert.Originally posted by Mayhem
Anyone know how much it costs to repair (straighten) a bent rim? I hit a curb a few months back and if the rim can be straightened, it might be cheaper than purchasing a new one. I know it can be resurfaced.
That\'s what I\'m hoping to do, but so far no one wants to sell just one rim, so it\'s been difficult. So far it looks like either repair the old one (which I\'m not sure I really want to do) or buy brand new.Originally posted by 2004mz3
is this an oem rim?....if it is, i would rather get a used one off of someone for slightly more if not the same amount that it would take to straighten and resurface it
There has to be some junkyards with some smashed M3\'s in the GTA.
Anyone heard of any junkyards with smashed 3\'s? I\'ll have to call around Hamilton and see if any of them over there have any.
Yeah! That\'s your next best bet. Flip through some yellow/white page listing at Junkyards.
The more highend ones have a data base of what is in their yards or what is wrecked out there and can even ship it closer to your. I\'ll try and dig up a list of GTA and surrounding area junkyards which was mentioned on my TORORNTO PROTEGE BOARD in a compiled list although our search engine sucks.
Comprehensive SCRAP YARD LIST
http://www.car-part.com
Whatever, here\'s my entries:
404 Auto Recycling.: Sharon, ON
Aadco Automotive: Brampton , ON
Abe\'s Auto Recycling: Bowmanville, ON
Ajax Auto Wreckers: Ajax, ON
Andy\'s Auto Wreckers: London, ON
Arnprior/Ottawa Auto Parts: Arnprior, ON
Autoland of Delhi: Simcoe, ON
B & D Auto Recycling: Oakville, ON
B.O.S. Auto Parts: Windsor, ON
Bell City Auto Center: Brantford, ON
Bodyline Auto Recyclers: Hamilton, ON
Carcone\'s Auto Recyclers: Aurora, ON
Cargo Auto Recyclers: North Bay, ON
Cathcart Auto: Burford , ON
Caughill Auto Wreckers: Niagara-on-the-Lake, ON
Central Trux: North Bay, ON
Cookstown Auto Center.: Cookstown, ON
Corey Auto Wreckers: London, ON
Daves Truck & Auto Parts: Carp, ON
Dominion Auto Recycling: Stoney Creek, ON
Essex Auto Wreckers: Essex, ON
Euro Depot: Mount Forest, ON
Fenton Auto Parts: Orillia, ON
Fergus Auto Recyclers: Fergus, ON
Flesherton Auto Recyclers: Proton Station, ON
Frontier Auto Dismantlers.: Port Robinson, ON
GG Motor Sales & Auto Recycling & Parts: Hamilton, ON
Hanks Auto Wreckers: St. Clements, ON
Hilltop Auto Wreckers: Richmond Hill, ON
Hollywood North Auto Parts: Toronto, ON
J & B Auto Wreckers: Windsor, ON
J & J Auto Recyclers: Leamington, ON
Japanese Used Auto Parts: Scarborough, ON
JMW Automotive: Kitchener, ON
K & L Auto: Kirkland, ON
LaSalle Auto Centre: Sarnia, ON
Lecavalier- Cumberland: Cumberland, ON
Logels Auto Parts: Kitchener, ON
Mathews Auto Recycling: Beaverton, ON
Mega City Auto Recycling: Georgetown, ON
Metrowide Auto Parts: Baldwin, ON
Mike\'s Auto Parts: Stoney Creek, ON
Millers Auto Recycling: Fort Erie, ON
Modern Auto Parts Limited: Scotland, ON
North Queen: Toronto, ON
Number 9 Auto Wreckers: Tottenham, ON
P & G Auto: North Bay, ON
Port Perry Auto Wreckers: Blackstock, ON
Port Sydney Auto Recycling: Port Sydney, ON
Queensway Auto Parts (No U.S. Shipping): Port Robinson, ON
Rectangle Auto Supply: St. Catherines, ON
Rock City Auto Supplies.: Sudbury, ON
S & L Auto - No US Shipping: London, ON
Saunders Auto Service: Thorndale, ON
Schneider\'s Auto Wrecking: Rostock, ON
Shaw Auto Recyclers (No U.S. Shipping): London, ON
Sonshine Auto Parts: Navan, ON
Standard Auto Wreckers Yard #1 - OARA, ARA, URG: Toronto, ON
Streetsville Bush Auto Wreckers & Parts: Milton, ON
Tazco Auto Parts: Oshawa, ON
Team J.M.W. (Listowel): Listowel, ON
Thunder Bay Auto Parts: Thunder Bay, ON
Traceys Auto Wreckers: Utopia, ON
Union Auto Parts: Nepean, ON
Valley Automotive: Pembroke , ON
Wm King & Sons Salvage: Sault Ste. Marie, ON
Woodbeck Auto Parts: Stirling , ON
Woodstock Auto Recyclers: Woodstock, ON
Off on a slight tangent - is it possible to fix a rim with a small hairline crack? Someone wanted to sell me a set where one had a small hairline crack. He says a shop can easily fix it for $40 by welding it - good as new. I say BS, but I ain\'t no engineer. Anyone have any info?
____
Personally have not had any experience with it, but even if it can be repaired \"as good as new\", that particular wheel would not be able to handle the same amount of stress as a non-repaired wheel. Considering the wheel/tire is the only point of contact on the ground, I would not put my safety in jeopardy to save a few bucks....Originally posted by Whos ur dadd
Off on a slight tangent - is it possible to fix a rim with a small hairline crack? Someone wanted to sell me a set where one had a small hairline crack. He says a shop can easily fix it for $40 by welding it - good as new. I say BS, but I ain\'t no engineer. Anyone have any info?
Another suggestion would be to buy the wheels, \"if it\'s a good price\", and see if you can replace the damaged one with a new one. It will still save you money... not as much, but I would feel a lot more comfortable with that.
2005 Mazda 3 Sedan - Indigo Blue
2010 MazdaSpeed 3 - Red
great list.....thanks demon....
hey dadd......fixing a rim isn\'t really feasible. It\'s possible to do as good as new, but no way for 50 bucks.....My wheel is slightly bent and i sent for a quote at wheelfix.com. This is the email they sent me back
\"Thanks for your quote request. The wheel is probably bent after the impact. Most likely centre bent which means it has twisted from the bolt face. We can fix that. It will be between $220 & $260 for the repair and refinish. If you are in the gta we do pick up and delivery Monday to Friday. After seeing your wheel at our shop we can call you with the exact price.\"
so in that case, it\'s better to buy a brand new rim at Mazda for $290.
I have the same problem!
Hit a curb and bent the rim.
It's really bent it...the sound kicks in starting 65km/h
Mayhem did you had any success getting a used one?
If yes... from where?
Or you end up buying brand new one from the dealership?
Any feedback will be apreciated
Oh and www.carcone.com doesn't have them on stock ATM
Cheers