Tri-City Area (Kitchener/Waterloo/Cambridge or Guelph)

[Bully Dog Racing]

That's cool. We're playing at Maxwell's in Waterloo on Apr 15 as well.

Hey KW and area TM3 people, we should check this out!

[mParsonz]

If you want to support a local business, PZ Tuning (Northfield and Davenport) can get you the ITVs and the AP.

I actually picked up that AP last night, already had planned to from g16 lol. Still waiting on that hpfp. Flashed it today and fuel pressure was staying above 1600, but not going to run it long without the hpfp lol

[SomeGuy]

I actually picked up that AP last night, already had planned to from g16 lol. Still waiting on that hpfp. Flashed it today and fuel pressure was staying above 1600, but not going to run it long without the hpfp lol

Run a safe mode map or something tame. Stage 1 is usually ok without a HPFP and at least on gen2 it dumps fuel, goes rich, and falls on it's face if you drop below 1600 rather than ZZBing.

We'll have you properly modded before long lol @DLYDRVN @Bully Dog Racing and myself are all stage 2 or better and have done everything ourselves.

[DLYDRVN]

S'truth. I mean, ****ing boost leak.... But it's the truth!


Sent from my iPhone using Tapatalk

[mParsonz]

Run a safe mode map or something tame. Stage 1 is usually ok without a HPFP and at least on gen2 it dumps fuel, goes rich, and falls on it's face if you drop below 1600 rather than ZZBing.

We'll have you properly modded before long lol @DLYDRVN @Bully Dog Racing and myself are all stage 2 or better and have done everything ourselves.

haha sounds good should have had this stuff sooner, but I'm done school now so time to start blowin money lmao

[Mitchell3]

@mParsonz I passed you on weber today. You didn't see me cause I was aired up haha.

[mParsonz]

@Mitchell3 I did actually notice you but it was last second I always check the black mustangs to see if it's you

[Bully Dog Racing]

@Mitchell3 I did actually notice you but it was last second I always check the black mustangs to see if it's you

@mParsonz, I'm pretty sure I saw you Tuesday or Wednesday of this week at Weber and Erb about 1:00pm...noticed you at the last second and flashed lights.

[5-Speed_MZ3]

Anyone selling (or know someone selling) gen 1 used coilovers?

Thanks!

[DLYDRVN]

I am looking to part with mine and go back to a spring and shock setup... What are you looking for/looking to spend?


Sent from my iPhone using Tapatalk

[DLYDRVN]

Actually the genwon speed3 coils may or may not fit the mz3.
@5-Speed_MZ3


Sent from my iPhone using Tapatalk

[SomeGuy]

Actually the genwon speed3 coils may or may not fit the mz3.
@5-Speed_MZ3


Sent from my iPhone using Tapatalk

As far as I know they should physically fit but the spring rates are usually different on the speed versions because it's a heavier vehicle.

[DLYDRVN]

That's what i meant to type... Brain not working totally this morning >_<


Sent from my iPhone using Tapatalk

[Flagrum_3]

As far as I know they should physically fit but the spring rates are usually different on the speed versions because it's a heavier vehicle.

They will fit but you are right about the spring rates and it will actually lift the front of the vehicle a bit making it a little lighter in 'feel' during handling, cornering.


_3

[SomeGuy]

They will fit but you are right about the spring rates and it will actually lift the front of the vehicle a bit making it a little lighter in 'feel' during handling, cornering.


_3

Eh, coilovers are height adjustable so the lift is a non-issue.

[Flagrum_3]

Eh, coilovers are height adjustable so the lift is a non-issue.

I'm aware of that, maybe lift was the wrong word. Still not sure how to describe what I mean, but has to do with the spring rate even if height is adjusted/adjustable, still affecting the front geometry.

[Genpu_Mz3]

@ricola cars lookin good man! Saw you on grange n victoria this afternoon

Sent from my SM-G920W8 using Tapatalk

[ricola]

@ricola cars lookin good man! Saw you on grange n victoria this afternoon

Sent from my SM-G920W8 using Tapatalk

Right on, thx!! Yours looks sweet!! Great sound!

Sent from my D6503 using Tapatalk

[jeffjones]

Anyone in KW do an exhaust change
Exhaust broke off between the tailpipe and muffler. Probably jus order a stock replacement off Rock Auto, maybe a resonator delete for a slight extra sound without the loud aftermarket sound.
Just need to find someone that could install it.

Any advice or help would be great.

Cheers

[drazen]

Anyone in KW do an exhaust change
Exhaust broke off between the tailpipe and muffler. Probably jus order a stock replacement off Rock Auto, maybe a resonator delete for a slight extra sound without the loud aftermarket sound.
Just need to find someone that could install it.

Any advice or help would be great.

Cheers

@jeffjones

contact @Reddie1337

[jeffjones]

@jeffjones

contact @Reddie1337

Awesome, thanks

[r4BBiT]

Who did I follow this morning on Westmount? Second gen skyactiv black hatch with TM3 plates?

[p-o-g-i]

http://www.torontomazda3.ca/forum/sh...32#post1335432

[trance|ghost]

Hey guys, Live in kitchener.. work in waterloo, just picked up a speed3 from Forbes mazda

[Bully Dog Racing]

Nice! We have a white gen2 Speed as well.

Mod plans?