- Part number for kyb rear shocks for gen 1 speed 3 (3 replies)
- 2007 Speed3 front lower control arms (6 replies)
- Sway bar end links (4 replies)
- Tuning and modeling suspension experience? (7 replies)
- So what should I do about shocks? (3 replies)
- SS brake lines (1 replies)
- OEM Pads/Rotors/Service Questions (36 replies)
- Front springs loose? (2 replies)
- Coilovers (1 replies)
- Shocks, Struts, and End Links (16 replies)
- Brake options ( Rotors & Pads) (27 replies)
- RSB Bracket Broke AGAIN - Looking for replacement options (43 replies)
- Standard Suspension (2 replies)
- Where to buy parts. (5 replies)
- Leaking Rear Shock - Knocking Over Bumps (5 replies)
- Brake pad help (7 replies)
- Lowered on Pro Kits - Uneven Drop in the Rear (3 replies)
- Front rotors, brake pads and rear shock replacement advice. (25 replies)
- Gen2 oem springs in a Gen1 Speed3 (1 replies)
- Bad bind sound after replacing front end links (0 replies)
- Sensen Struts and shocks? (2 replies)
- B12 Prokit (0 replies)
- Rear Suspension Problem (6 replies)
- B12 Prokit (2 replies)
- Quick answer needed regarding torquing bolts (5 replies)
- Wilwood 4 Piston Brake kit (10 replies)
- Are the other rotors really better than OEM? (4 replies)
- MAZDASPEED3 CORKSPORT LOWERING SPRING!!!!! (11 replies)
- Suspension / Control Arms (8 replies)
- Prokit and Koni Yellows Review and Discussion (31 replies)
- Corksport lowering springs (2 replies)
- Brake pads + rotors (60 replies)
- Squeaky sway bar bushings front rear. (39 replies)
- will 16" OEM 3 rims fit over gen2 brake calipers? (14 replies)
- Wore out bearings? (21 replies)
- Gen1 springs; swift vs prokit (5 replies)
- What setting should I set Koni Yellows with Cobb Springs? (2 replies)
- What spring will give me a miminal drop? Gen1 Speed3 (22 replies)
- Weird cricket chirping noise, front suspension. Clunk in rear. (18 replies)
- rear trailing arm bushing polly or rubber/better pricing (0 replies)
- New Koni install, rear clunking? (3 replies)
- Mazdaspeed Coilovers with stock springs? (1 replies)
- Popping sound from front of car (8 replies)
- Sway Bar Collars (22 replies)
- Noise when turning at low speeds! Help! (13 replies)
- Just Arrived (10 replies)
- Anyone one have experience with Canuck Motorsport lowering springs? (20 replies)
- Rear Spring Rates (0 replies)
- Koni Yellow's Vs. Bilstein Sport Shocks (23 replies)
- Coilovers Vs Lowering Springs (7 replies)
- Whiteline Sway Bars (6 replies)
- Creak or squeak in front suspension when cold (24 replies)
- MS3: Inexpensive OEM Shock Replacement (15 replies)
- Magnum vs Power Slot (19 replies)
- HowTo: Change front brake pads on Mazdaspeed3 (7 replies)
- Are some pads compatible between Mazda3 and Mazdaspeed3? (12 replies)
- Coilover VS Shocks+Springs upgrade? (69 replies)
- Bumpstops... (2 replies)
- where to get Koni yellows? (10 replies)
- Koni yellows or Koni FSD, its not that easy (35 replies)
- Is anybody using hotchkis rear bar, with stock links? (3 replies)
- 2010 ms3 - eibach prokit - vibration trouble after installation (6 replies)
- H&R Spring from Corksport (3 replies)
- Eibach Pro Kit will they fit!!!!!! (6 replies)
- Looking for lowering springs for MS3 (6 replies)
- Interested in Camber Plates from Ground Control ? (0 replies)
- Fortune Auto Coilovers?(Stainless Steel with 50mm pistons) (53 replies)
- Bilstein sport(rear)/Koni yellow(front)? (4 replies)
- Gen 2 shocks/struts on a Gen 1? (3 replies)
- KONI YELLOWS (1 replies)
- Where to buy H&R coilovers? (33 replies)
- Rear Shock Replacement - OEM (9 replies)
- Shock/Strut Options? (41 replies)
- Koni Sport/Yellow's settings (2 replies)
- Cobb springs problem (6 replies)
- Rear suspension creaking (26 replies)
- looking for some re-assurance... (8 replies)
- Noob question about aftermarket rotors (10 replies)
- Roadmagnet springs,anyone? (2 replies)
- BIG bump - Speed 3 goes OUCH! (28 replies)
- Eibach Prokit (19 replies)
- Brake Service (20 replies)
- where to get OEM spec rotors + pads~ (9 replies)
- Mazdaspeed coilovers (29 replies)
- Brake Hub (2 replies)
- Brake Parts For Mazdaspeed (Part Numbers) (5 replies)
- Rotor Warranty Coverage? (4 replies)
- Need Brakes; Help? (14 replies)
- Recommend a good brake upgrade for M3GT? (5 replies)
- OEM rear discs (11 replies)
- Oh Oh(Oil) Shock Speed 3 (16 replies)
- Strange click in forward & noise rolling backwards (28 replies)
- KVR 2 Piece Rotors - Ottawa Region Deal (20 replies)
- Hawk Ceramics and Goodridge SS Brake lines (16 replies)
- Eibach vs. Tein (39 replies)
- COBB Suspension kit (2 replies)
- Thoughts: Koni FSD's and/or Eibach Pro Kits on MS3? (20 replies)
- Squealing Brakes ....... Again ?! (32 replies)
- MS3 Spring and camber plate problems (5 replies)
- Hotchkis Sway Bar Kit Available Soon (0 replies)
- Hawk Pads for Mazdaspeed3 (16 replies)
- caliper paint (9 replies)