New Turn Signals

[ParsM3GT]

I just installed my new turn signal bulbs today. I want to thank my friend who came over and for having small hands. I had this swap done in 2 minutes. These are orange bulbs coated in silver. Looks much nicer. Any orange reflection is due to the sunlight in the shade you see nothing.


http://i16.photobucket.com/albums/b42/wolverine29/th_DSCF0180.jpg (http://i16.photobucket.com/albums/b42/wolverine29/DSCF0180.jpg)
http://i16.photobucket.com/albums/b42/wolverine29/th_DSCF0179.jpg (http://i16.photobucket.com/albums/b42/wolverine29/DSCF0179.jpg)
http://i16.photobucket.com/albums/b42/wolverine29/th_DSCF0178.jpg (http://i16.photobucket.com/albums/b42/wolverine29/DSCF0178.jpg)
http://i16.photobucket.com/albums/b42/wolverine29/th_DSCF0177.jpg (http://i16.photobucket.com/albums/b42/wolverine29/DSCF0177.jpg)

[FLIPDADY]

Nice grille!

Where did you get them bulbs?

[ParsM3GT]

I got them on ebay. Heres there website http://www.silverbulbs.com/

[bluntman]

Ah, yes...I remember them! ;)

[Dave_Mazda3]

Looking good....where\'d you get that grill?

[Xenon]

I just got LED turn signal bulbs from eBay. Although they are no where close to as bright as filament bulbs, they are cool looking at night.

Unfortunately, the back ones, dispite being LEDs, still have a orange plastic cap on it :( But whatever. I\'m not going to fork out extra money for such a small detail. I\'ll post pics up as soon as I take them::P

[DeLaY_NoMoRe]

How did u do it in 2 mins? I can\'t even put my fingers in that little space at the back, there\'re not enough place to place ur hand on them?

[sp3GT]

It just all depends on the size of your hand, i find that taking out the plug to the low beams will provide more room.

[ParsM3GT]

Hey Dave I found the grill on ebay.



I was going to unplug the low beams to but my friend was there and his hands were small enough I just got lucky he was there. The only thing I removed was the triangle shape thing on the drive side it has three plastic screws and is attached to the air filter.

[3GFX]

I\'ve got the same bulbs, they\'re sharp. I got small cuts on my hands squeezing to put the bulbs in. The funny part is I got one cut on each hand that was opposite the other. Had a good laugh when I cleaned the dirt off my hands....pffft and the manual says to take it to a dealer :p

[MAZDA Kitten]

Originally posted by DeLaY_NoMoRe


How did u do it in 2 mins? I can\'t even put my fingers in that little space at the back, there\'re not enough place to place ur hand on them?

I did my own too - i guess you need small girly hands for that :P

(I hope your friend is a girl LOL)

[Dave_Mazda3]

anyone know the seller on eBay for that grill? or if there\'s a web site for them!? thanks

[ParsM3GT]

heres the guy who sells them. Or just go to ebay and type in Mazda 3 Grills.

http://stores.ebay.ca/GoodyOnBay

[Dave_Mazda3]

how\'s the install?

[ParsM3GT]

Very easy to install helps to have a second set of hands but easy enough alone. It go`s over the stock grill. Here are some pics.

4 screws with spring loaded wing nuts. Put the screws through the holes then put the nuts on then pop it on.

http://i16.photobucket.com/albums/b42/wolverine29/grill2.jpg

LP holder needs to be cut away deeper so it is not touching the grill

http://i16.photobucket.com/albums/b42/wolverine29/grill.jpg

[Dave_Mazda3]

Awsome man..thanks for posting up pics too...i might have to jump on one of these now!
looks clean... it also helps that i drive the same colour car as you so i can picture it on my own wheels!

thanks again!

[ParsM3GT]

hey np man i will see you at the meet u can have a closer look.