skunk2
09-18-2007, 02:02 AM
had a little fiberglass project that went down a couple weeks ago. the idea was to keep it clean and simple. fabricated a FG enclosure in the spare tire housing an elemental designs SQ 10 sub. won't be able to do it without this sub due it's mounting depth of 3 inches. total depth of the enclosure is about 5 inches with a hump in the middle bottom which has about 1.5 inches to clear the sub. didn't get to measure total volume.
here are some pics.....no progress pics...hands were too busy to take pics.
http://www.putfile.com/pic.php?img=6638938
http://www.putfile.com/pic.php?img=6638937
http://www.putfile.com/pic.php?img=6638936
http://www.putfile.com/pic.php?img=6638935
the enclosure is already finished at this point and already in the car. it sounds pretty damn good for a 10 inch sub getting about 400WRMS. i am coming from an eD 13kv2 running off the same amp and the SQ10 sounds cleaner (the 13kv2 wasn't really in a spec box) still need to do the fake floor as the enclosure raised it by about 2 inches. whatever that's left to do is cosmetic. will take pics of the sub in the car when I get a chance.
here are some pics.....no progress pics...hands were too busy to take pics.
http://www.putfile.com/pic.php?img=6638938
http://www.putfile.com/pic.php?img=6638937
http://www.putfile.com/pic.php?img=6638936
http://www.putfile.com/pic.php?img=6638935
the enclosure is already finished at this point and already in the car. it sounds pretty damn good for a 10 inch sub getting about 400WRMS. i am coming from an eD 13kv2 running off the same amp and the SQ10 sounds cleaner (the 13kv2 wasn't really in a spec box) still need to do the fake floor as the enclosure raised it by about 2 inches. whatever that's left to do is cosmetic. will take pics of the sub in the car when I get a chance.