2008 MS3 modded Results

[spd frk]

I will post up the dyno pic, once I get it hosted. I went a few weeks ago and made 242WHP and 256 WTQ with just an RPMC inlet installed. Went back today as I have added the CPE catted DP and CPE CAI since that time.

I made 268WHP and 290 WTQ. A bit lower than expected but still up 26 and 34 respectively.

For reference a few buddies came and:
1997 M3 with Vortech SQ1 at 6psi made 273WHP and 245WTQ
2007 335 Coupe stock made 268WHP and 277WTQ
2001 Beetle TDI with nozzels, intake, exhaust, tune made 134WHP and 262WTQ.

J

[dentinger]

pretty impressive.

i like the numbers diesels makes.

ish horsepower, and tonnes of torque!

[-cj-]

Are you running with an AP?

[spd frk]

no AP, or other management. Just the CAI, TBE, and IP.

[Hives]

nice numbers!

[mleblond]

yeah I need to go for mine soon before it gets too hot lol Good numbers, lets see the graphs now :)

[Unoriginalusername]

sounds about right... i dynoed nearly the same with my cai and cpe tbe (no inlet) before going fmic and ap etc.
http://img.photobucket.com/albums/v252/cndxrs/dyno001.jpg

[3DEE]

That's with the stock exhaust I presume? Nice numbers.

[spd frk]

That was with CPE Catted DP and Cat back exhaust. I didn't have my CPE CAI or Cobb AP at the time.

[spd frk]

Sorry I just meant to say I didn't have my Cobb AP at the time. I had the CAI already installed.

[shu5892001]

same horsepower and more torque than a 335i !!!!

[kurse]

same horsepower and more torque than a 335i !!!!

thats all that i noticed lol

[cy88]

Except, 335i is RWD. :)

[SP33D 3]

i highly suggest you invest in the standback, i absolultly love the thing

[Mazda3X2]

Very nice numbers. Love the torque.

[spd frk]

i highly suggest you invest in the standback, i absolultly love the thing


I quite like the AP actually. A little easier to use, since I tune myself. I am trying to go back and dyno post-AP this weekend.

[Gen1GT]

I will post up the dyno pic, once I get it hosted. I went a few weeks ago and made 242WHP and 256 WTQ with just an RPMC inlet installed. Went back today as I have added the CPE catted DP and CPE CAI since that time.

I made 268WHP and 290 WTQ. A bit lower than expected but still up 26 and 34 respectively.

For reference a few buddies came and:
1997 M3 with Vortech SQ1 at 6psi made 273WHP and 245WTQ
2007 335 Coupe stock made 268WHP and 277WTQ
2001 Beetle TDI with nozzels, intake, exhaust, tune made 134WHP and 262WTQ.

J

I know I'm late to the party here, I'm curious as to how much power the Beetle made stock, and what kind of times it runs in the 1/4 mile now?

[spd frk]

The beetle has never made a stock dyno, nor run the 1/4 mile so your guess is as good as mine.

[froggy]

The beetle has never made a stock dyno, nor run the 1/4 mile so your guess is as good as mine.

well going by the posted vw numbers a stock TDi engine from the beetle should be in the range of 95 hp and something like 200 ft.lbs of torque

[GRACEHMS]

Impressive numbers!

I was at the dyno last week and here were some of our numbers:

B5 S4: 237whp (me - Stg1)
B8 S5: 270whp (exhaust mods)
B8 S4: 307whp (stock)
New S6: didn't get #s
E93 M3: didn't get #s

Your Mazda Speeds put out good numbers! I'm sure traction must be an issue though... And when that 335 gets a tune - watch those #s jump!

[W_L89]

quite an increase in whp