Window switch replacement thoughts?

[mikeball]

Hey to all,

I am planning to replace all the window switches in my MZ3 with one touch switches, and was wondering if anyone else here has attempted this.


The plan is to buy 6 of the drivers side one touch switch, and replace the regular switches with them. I am also considering hooking them directly up to the battery (or get a smaller battery for this purpose) so that I can put them up/down regardless of whether or not the car is on.

Thoughts? Suggestions?

Thanks,

MIke

[TheMAN]

you can't do it that way
the master window switch comes all together as 1 piece... there's NO way to do it with your idea

the only feasible way for one touch window up is to get the european switch, wiring, motor, and sensors for the driver's door... the other windows, you can try using JDM parts but with ms6 switches

it's really more trouble than its worth

[mikeball]

Ack :( thank you.

[McGuyver_3]

The only other option you have is to purchase mazda 6 window switches they can do both front windows auto up and down BUT you need a rather expensive control module that controls both of the windows. The control unit has relays built in that tell it when to start and stop from my knowledge

[Noisy Crow]

You would probably find installing something like this:
http://www.a1electric.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=AEOS&Product_Code=530T
to be simpler....