HellaFlush mazda3s?

[loki]

I would imagine the people who currently think that project is cool are all born in the 90's or later

[schmat66]

if this came out of a beat up civic i would love it more. but from what his car was (black with the crazy red wheels) i can't say I'm too much of a fan. i love how crazy he is and doesn't care. does what he wants. but i wish he kept it more clean.

[loki]

if this came out of a beat up civic i would love it more. but from what his car was (black with the crazy red wheels) i can't say I'm too much of a fan. i love how crazy he is and doesn't care. does what he wants. but i wish he kept it more clean.

Pics of before?

[GWN]

If by making it work you mean that the car can barely drive not to mention turn, and the tire burned a hole straight through the flares after driving once...

But how many people on here complain about rubbing because they want to go lower and wider? They don't catch any flames, because they're playing it safe. And more often than not, the solution to rubbing isn't to raise the car back to where it was, but to modify it to make the wheels work, which is exactly what he's doing. Just because he's going way harder and gives way less of a f*** what we think about him doesn't really open him up to criticism in my eyes.

And this isn't his daily driver, it's his project car from what I've heard/read. Why not make it batshit crazy? I think he gets way more hate than he deserves.

In my honest opinion, if he had OEM paint, polished wheels, and didn't post up about his frame "reductions" people would worship the ground this car drove on. Because it's a rattle can paint job and he's chopped it all up, people say it looks terrible. He isn't running demon camber, his stretch barely qualifies as stretch (19" wheels with a 20" step lip, correct me if I'm wrong), and he has the widest flares I have ever seen on a 3. All the while being without a doubt the lowest static car I've ever seen in North America

I really think if people didn't know what he did to get his car setup the way it is now, he'd be revered as a god among us stance folk

[fruitloops]

I would imagine the people who currently think that project is cool are all born in the 90's or later
Hey now..

[fruitloops]

Pics of before?
http://tapatalk.imageshack.com/v2/15/03/29/f313d6658758b1ab564de2569d3b7001.jpg

[fruitloops]

http://tapatalk.imageshack.com/v2/15/03/29/ede1ff6f7e55d38d11f0d5bd4486795a.jpg

[Kiewan]

I would imagine the people who currently think that project is cool are all born in the 90's or later

If it were a rusty pile purchased from a scrap yard: then yes, maybe it would be cool but when he's coming from the middle picture to this: no it looks terrible. Just based on looms and Setting aside driveability of course.

[Aitch]

GWN if you want lowest static car in North America, look up fabel the Miata on StanceWorks :)

[loki]

But how many people on here complain about rubbing because they want to go lower and wider? They don't catch any flames, because they're playing it safe. And more often than not, the solution to rubbing isn't to raise the car back to where it was, but to modify it to make the wheels work, which is exactly what he's doing. Just because he's going way harder and gives way less of a f*** what we think about him doesn't really open him up to criticism in my eyes.

And this isn't his daily driver, it's his project car from what I've heard/read. Why not make it batshit crazy? I think he gets way more hate than he deserves.

In my honest opinion, if he had OEM paint, polished wheels, and didn't post up about his frame "reductions" people would worship the ground this car drove on. Because it's a rattle can paint job and he's chopped it all up, people say it looks terrible. He isn't running demon camber, his stretch barely qualifies as stretch (19" wheels with a 20" step lip, correct me if I'm wrong), and he has the widest flares I have ever seen on a 3. All the while being without a doubt the lowest static car I've ever seen in North America

I really think if people didn't know what he did to get his car setup the way it is now, he'd be revered as a god among us stance folk

Buddy cut up his frame

When buddy who doesn't trailer queen his car, gets into an accident with a squirrel and his car explodes because it no longer has any of the original structural integrity, you can go worship at his grave

Of all the cars to defend, this isn't one of them

[Dave_The_BMXER]

I thought he had fixed it now?

To my knowledge no "Been drinking since 10:30 , gonna be a funnnnn day hahahaha gotta be drunk in case I ruin my car driving with it not structured  seems to be holding up ok tho"

https://instagram.com/p/0frIYrFF1x/?taken-by=framebanggang

I've liked previous iteration of his car but it is really just a rolling write off right now. Also his attitude seems to be becoming increasingly more irritating.

However my #1 biggest complaint with his recent iterations is execution. He has a lot of ideas, and no one can take that away from him but his execution is lacking. With it not being his daily driver he could take the time to iron things out a little better but for whatever reason he simply doesn't.

Edit: loki there are plenty of vehicles with cut frames driving on the road today. My truck had a cut frame. I just reinforced it I didn't cut it and pray.

[schmat66]

like this was my fav

https://scontent-iad.xx.fbcdn.net/hphotos-xaf1/v/t1.0-9/1452130_10201154096839446_880980587_n.jpg?oh=a2a79 06926a21bf4ef965d088f657bb5&oe=55A8B223
https://scontent-iad.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/1891180_241739389338658_1050588011_n.jpg?oh=261ecc 9061de3825b86c6e14cbc8fd48&oe=55AFB032

[loki]

To my knowledge no "Been drinking since 10:30 , gonna be a funnnnn day hahahaha gotta be drunk in case I ruin my car driving with it not structured  seems to be holding up ok tho"

https://instagram.com/p/0frIYrFF1x/?taken-by=framebanggang

I've liked previous iteration of his car but it is really just a rolling write off right now. Also his attitude seems to be becoming increasingly more irritating.

However my #1 biggest complaint with his recent iterations is execution. He has a lot of ideas, and no one can take that away from him but his execution is lacking. With it not being his daily driver he could take the time to iron things out a little better but for whatever reason he simply doesn't.

Edit: loki there are plenty of vehicles with cut frames driving on the road today. My truck had a cut frame. I just reinforced it I didn't cut it and pray.

To the first bolded line, that pretty much sums it up for me

To the second bolded line, did you "reinforce it" or was it engineered? The frames of these cars are engineered to behave a certain way, by adding your own "reinforcing" you may think you're helping but in actual fact you haven't achieved anything. I'm not saying this is the case all the time, but just adding some extra steel here and there changes the behaviour of the entire system.


Maybe people are comfortable messing around with their cars because by driving on the ground they feel safe. Imagine if you flew planes, would you just start cutting up the frame of the plane and adding your own "reinforcing"?


I find a similar comparison is those people who remove/cut/modify their crash bars to fit bigger front mounted intercoolers

[midnightfxgt]

Hacking and welding is a lot more predictable on a car with a traditional frame, and not on a unibody.

This guy is a hack. The work is junk. I don't get why "doing it yourself" is a good thing, when you have no idea how to do it right.

[Dave_The_BMXER]

To the second bolded line, did you "reinforce it" or was it engineered? The frames of these cars are engineered to behave a certain way, by adding your own "reinforcing" you may think you're helping but in actual fact you haven't achieved anything. I'm not saying this is the case all the time, but just adding some extra steel here and there changes the behaviour of the entire system.


Ran a well tested, well built, bolt in notch.
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xaf1/v/t1.0-9/190509_4651283757_1618_n.jpg?oh=c5f04563defb9444f4 66c3c2d85306b5&oe=55BAA11C&__gda__=1433478092_fe5a6b2fa9ea13586697b3e88f07774 3
https://scontent-sea.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/195915_4651268757_808_n.jpg?oh=9b48b64d906bab25250 1c3f88f85bd14&oe=5576475B

Had I a bagged it I would have probably built/had built a new back half.

But the car in question didn't do anything which is really scary.

[GWN]

This build is to stance what that 700+ WHP speed from a while back is to the "racecar" folks, it's completely f***ing insane. Neither are daily drivable, both are arguably dangerous on the road, but both are well beyond what most people thought possible with the 3 platform.

As far as the aesthetics (or lack thereof) it's all part of his "design". He's basically "building" a ratrod mazda 3, which I think is cool as hell... mostly because its something no one has considered- let alone done- before

[loki]

This build is to stance what that 700+ WHP speed from a while back is to the "racecar" folks, it's completely f***ing insane. Neither are daily drivable, both are arguably dangerous on the road, but both are well beyond what most people thought possible with the 3 platform.

As far as the aesthetics (or lack thereof) it's all part of his "design". He's basically "building" a ratrod mazda 3, which I think is cool as hell... mostly because its something no one has considered- let alone done- before

No, this is the equivalent of a Speed3 achieving 700whp with a 550 shot of NOS, where the guy built the NOS canister himself, used straws to direct the NOS into the engine, and instead of injectors used hypodermic needles, had no engine management except for a really cool cockpit style switch marked "ON" and is still running the stock fuel pump

[midnightfxgt]

No, this is the equivalent of a Speed3 achieving 700whp with a 550 shot of NOS, where the guy built the NOS canister himself, used straws to direct the NOS into the engine, and instead of injectors used hypodermic needles, had no engine management except for a really cool cockpit style switch marked "ON" and is still running the stock fuel pump

BAHAHHAHA...... Agreed.

To build a 700WHP car, you need to know what you're doing. This guy hacks stuff out of the way. Safety and quality be damned. If the goal is to get low, at any cost, without properly doing something, this guy wins I suppose.

[Aitch]

No, this is the equivalent of a Speed3 achieving 700whp with a 550 shot of NOS, where the guy built the NOS canister himself, used straws to direct the NOS into the engine, and instead of injectors used hypodermic needles, had no engine management except for a really cool cockpit style switch marked "ON" and is still running the stock fuel pump
I don't always agree with Loki, but when I do....

[GWN]

No, this is the equivalent of a Speed3 achieving 700whp with a 550 shot of NOS, where the guy built the NOS canister himself, used straws to direct the NOS into the engine, and instead of injectors used hypodermic needles, had no engine management except for a really cool cockpit style switch marked "ON" and is still running the stock fuel pump

I think you missed my point, all I'm trying to say with that comparison is that both cars are "unsafe" on the road for very different reasons.

Clearly, we all realize he isn't building the car to win car shows... he's just building it for himself. And I think we can all agree he's pushing the platform further than anyone else has with regards to fitment, which is what this thread is all about after all, no?

I'm not sure why everyone is still so up in arms about stuff like this, it's not new. People have been chopping shit out of the way forever to get lower, and now someone does it to a mazda3 and it's the end of the world? He's driven the car slammed safely for five years, how long does he have to keep doing this until people will just sit back and let him do his thing?

[loki]

I think you missed my point, all I'm trying to say with that comparison is that both cars are "unsafe" on the road for very different reasons.

Clearly, we all realize he isn't building the car to win car shows... he's just building it for himself. And I think we can all agree he's pushing the platform further than anyone else has with regards to fitment, which is what this thread is all about after all, no?

I'm not sure why everyone is still so up in arms about stuff like this, it's not new. People have been chopping shit out of the way forever to get lower, and now someone does it to a mazda3 and it's the end of the world? He's driven the car slammed safely for five years, how long does he have to keep doing this until people will just sit back and let him do his thing?

I didn't miss your point, your comparison was a poor one

An unsafe care is different to a car potentially being driven in an unsafe manner. There are a few production cars on the roads with 700whp or close to 700whp and it does not mean they aren't safe.

what I fail to understand is why you are defending him. I don't really care about him or his ride, I just think it is strange that you feel the need to justify his actions as if he's doing ground breaking things when it fact it's car breaking things

I wouldn't go as far to say he's been driving safely for 5 years, he just happened to be incident free for 5 years. There's a difference, but maybe you won't understand that either

[Dave_The_BMXER]

If this car makes it 5 years with that much metal removed at the height it is I will eat humble pie.

[GWN]

I didn't miss your point, your comparison was a poor one

An unsafe care is different to a car potentially being driven in an unsafe manner. There are a few production cars on the roads with 700whp or close to 700whp and it does not mean they aren't safe.

what I fail to understand is why you are defending him. I don't really care about him or his ride, I just think it is strange that you feel the need to justify his actions as if he's doing ground breaking things when it fact it's car breaking things

I wouldn't go as far to say he's been driving safely for 5 years, he just happened to be incident free for 5 years. There's a difference, but maybe you won't understand that either

I'm not defending the person, I'm more just trying to defend the way he chooses to modify his car.

The Speed3 chassis wasn't designed to handle 700+ WHP, so yes I would argue that a speed built to put out that kind of power is inherently unsafe on the road as a daily driver, the same way you would argue that us stance folks drive cars that are unsafe on the road. The thing is, neither this car nor the 700+ speeds are daily drivers, the same way most rat rods aren't daily drivers. They're built as project cars, to push boundaries and test limits. I don't understand why you can fully support one but fail to see the merit in the other. Is it because it looks "like shit"? If you didn't know that he notched/cut away parts of his frame would you be so opposed to it?

I stand by my earlier statement. If Kevin didn't run a live blog of his build on instagram and just posted the final product, people would be in awe of his car.

How can you say that he is an unsafe driver if you've never seen him drive outside of a three minute video from Stance Nation? Everyone I know who drives a fitted car is incredibly cautious, because driving in an unsafe manner would literally mean the end of your car. To get by on just pure luck while driving slammed in an unsafe manner for five years seems doubtful to me. Hell, I wasn't even that low and I had to plan out my routes days in advance, on top of watching for reflectors / dips in the road.

I don't know, I'm not trying to be inflammatory or come across as an *******, I just wish people could appreciate when someone puts effort into their car and actually sees their build through, instead of getting to a roadblock half way though and saying "meh its good enough". Again, the car is clearly under construction, give the man a chance to reinforce his frame and dial things in before condemning him and his ride

[loki]

I said he was driving an unsafe car, as in a car unfit to be on the road. I didn't say he was driving in an unsafe manner.

I like your car GWN and think it looks great but I would hope that you don't intend to hack your car up in the effort to be even lower?!

[GWN]

I said he was driving an unsafe car, as in a car unfit to be on the road. I didn't say he was driving in an unsafe manner.

I like your car GWN and think it looks great but I would hope that you don't intend to hack your car up in the effort to be even lower?!

Haha ok I think we may have finally come to rest at an "agree to disagree" standpoint :D I misread the last sentence of your previous post, or read into it something different than what you meant I suppose!

But thanks, I like your car as well (too fast for me though :complain)

PERHAPS I'VE ALREADY REMOVED MY FRAME AND AM NOW DRIVING SUPPORTED BY ONLY MY HOPES AND DREAMS?!

But no as far as I've gone is hammering my front pinch welds, and even that makes me nervous. I couldn't see myself cutting right through my frame for more lows, which I guess is partially why I'm in awe of this car, he really lives the low life

[Dave_The_BMXER]

In other news here's an update on my speed

https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xfp1/v/t1.0-9/11113558_652195048219944_4061270103144545090_n.jpg ?oh=b7d68e32210ebb9a7880a74030ac6636&oe=55BE6CFA&__gda__=1438424691_4d5c60bb2496bf0816f018827637c4a 9
https://scontent-sea.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/11067490_10153127230323758_3854910992176490711_n.j pg?oh=02bdb0f3fea272570e29115a62839965&oe=55AB3B13

Went to Righteous Garage and got him to do a base roll and pull on it so I could tweak more at home. I'm trying to run as little camber as possible and sit quarter on wheel lip.

I could pile on the rear camber and probably tuck rim but it would look really, really bad at ride height (in my opinion) which is what I am trying to avoid. Shooting for 2 degrees up front and about 4 in the back (at ride height) with reasonably sound looking quarters and fenders. As I'm sure many of you have put together from my last car cleanliness is paramount in my eyes.

Also have to do some more heating and shape shifting on my fender liner as when I air out it pulls my front fenders slightly out of alignment.

If by the end of all this I don't like how park height and ride height looks I might change them from 9.5s to 9. But we shall see... 9 would allow me to run more tire too should I free up some project money for performance mods.

[Genpu_Mz3]

Might be a newb question but why not just remove your fender liners?

[Aitch]

I trimmed out one of my fender liners at the top when I was on air (turned out it wasn't needed with the tires I had) and realized that in winter, you get a lot of salt and slush thrown up into the tops of the fenders/engine bay without it. Killed one HID ballast that was up there. I've got a new one waiting to go in now.

[midnightfxgt]

Dave - Looks amazing. Thanks for not butchering the car in the name of "scene points" ;)

[Dave_The_BMXER]

Might be a newb question but why not just remove your fender liners?

Simply put, it's ugly. The fender area where it is missing looks very unfinished and unbecoming. Also as Aitch said all sorts of crap can get flung around. Ryan ended up with some rocks in there that pushed his fender out.

No beuno.
Aitch I am considering sectioning mine out. Remove some for summer, replace in the winter. Basically just the top portion would be gone for maximum aired out ness.

[loki]

I took my liners in the rear of my speed out for a bit, but it exposes the fuel pump on the rear right side. I believe it's the fuel pump

Either way there is some piece of equipment back there that I was not that comfortable having exposed

[Aitch]

@Aitch (http://www.torontomazda3.ca/forum/member.php?u=2301) I am considering sectioning mine out. Remove some for summer, replace in the winter. Basically just the top portion would be gone for maximum aired out ness.

Yeah that should be possible. The portion I cut out had a few of its own retaining clips so you'd be able to clip it back in. Might want an extra bit of rubber stripping or something along the edges to help seal it back up.

[midnightfxgt]

@Aitch (http://www.torontomazda3.ca/forum/member.php?u=2301) ..... for maximum aired out ness.

http://thumbs.newschoolers.com/index.php?src=http%3A%2F%2Ftheforvm.org%2Ffiles%2F thats-the-joke.jpg&size=400x1000

[loki]

Not a mazda3
Don't really like the front
Love the wheels

http://mazdafitment.com/wp-content/uploads/2012/05/IMG_3524.jpg

[FD22]

https://scontent-ord.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/11009142_811098185593252_1067063123894333514_n.jpg ?oh=9743550b20f29a2d3a19e0d68a94932e&oe=55B05426

https://scontent-ord.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/10547597_808494779186926_7767584157926602019_n.jpg ?oh=1476cacec6e4304a62317f8fab17c992&oe=55B8A110

[schmat66]

dave i love those wheels. what the offset again?

[GWN]

https://scontent-ord.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/10547597_808494779186926_7767584157926602019_n.jpg ?oh=1476cacec6e4304a62317f8fab17c992&oe=55B8A110

veilsides?

[Flagrum_3]

https://scontent-ord.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/10547597_808494779186926_7767584157926602019_n.jpg ?oh=1476cacec6e4304a62317f8fab17c992&oe=55B8A110

Damn that looks nice.

[Dave_The_BMXER]

dave i love those wheels. what the offset again?

30 currently

[schmat66]

i like ;)

[FD22]

Here's an interesting one. Very STI-like fenders..

https://scontent-lga.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/10356331_823429024360168_5443750058285726436_n.jpg ?oh=ee63bf47d3d976214d21780de29002f1&oe=55A758B6

Though in terms of fitment, if the fronts were just pushed out a liiiitle more, would really have hit the spot. Still, quite the car.

[GWN]

Here's an interesting one. Very STI-like fenders..

https://scontent-lga.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/10356331_823429024360168_5443750058285726436_n.jpg ?oh=ee63bf47d3d976214d21780de29002f1&oe=55A758B6

Though in terms of fitment, if the fronts were just pushed out a liiiitle more, would really have hit the spot. Still, quite the car.

suffering from air rake, just like me :(

5-8mm spacers all around would make it perfect imo

[Dave_The_BMXER]

Front tire size bugs more more than anything (I think?) the fenders are great though.

[rajin929]

https://www.youtube.com/watch?v=zRY5Vw0gC34&app=desktop

[schmat66]

old news

in new news..
i dig this

https://scontent-ord.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/11050263_10155339703665567_810559531541264923_n.jp g?oh=3d289108004da430494e489864294a2c&oe=55B19C88

[6strings]

eww that green one.
Gross, and not in a good way.

[Dave_The_BMXER]

All these random ONT 3s appearing. 18x9 +33 Cosmis XT-206?

[loki]

All these random ONT 3s appearing. 18x9 +33 Cosmis XT-206?

with TM3 plates

[Aitch]

and "PROJECT DAILY" stickers.

[FD22]

All these random ONT 3s appearing. 18x9 +33 Cosmis XT-206?


with TM3 plates


and "PROJECT DAILY" stickers.


sreekar

He's a KW member, just doesn't post too often anymore. This car was initially black.

But yes, looks wicked. Can't wait to see the new look in person.

[sreekar]

All these random ONT 3s appearing. 18x9 +33 Cosmis XT-206?

Yeahh Cosmis Racing XT206R's, but 18 x 9.5 +10

[Dave_The_BMXER]

Ah, that explains the rear. 215s?

[sreekar]

Ah, that explains the rear. 215s?

Yeah 9.5 all around. However I'm running stock camber arms atm :(
Waiting on my new ones from Dominant Engineering (ordered 2 months ago, smh -.-) hence the amount of poke haha

Yup - 215/35/18's

[schmat66]

yeah dom can be slow lol

[Dave_The_BMXER]

Yeah. Super slow.

[GWN]

like, turtle slow

[Genpu_Mz3]

http://images.tapatalk-cdn.com/15/04/09/73467538f124c53e8238db91ce620f9b.jpg

Jesus. Talk about slammed.

[loki]

like, turtle slow


Yeah. Super slow.

Like, lowered slow

[Aitch]

http://images.tapatalk-cdn.com/15/04/09/73467538f124c53e8238db91ce620f9b.jpg

Jesus. Talk about slammed.
Looks like 17s and very small tires. Actually the tires have a lot to do with it, you can see the rims aren't tucking or anything.

[Xerxes9]

I don't always agree with Loki, but when I do....

This. Loooooool. This thread wins

[GWN]

This. Loooooool. This thread wins

and he's only a week late, ladies and gentlemen!
http://media.tumblr.com/5fb9c6d11b340201f85441c070e2bdfc/tumblr_inline_nm0h48Bfvt1r2ako3.gif

[Aitch]

https://scontent.xx.fbcdn.net/hphotos-xat1/t31.0-8/11148859_828554363847634_6396748552774241563_o.jpg

[Dave_The_BMXER]

That almost makes me wish I bought a new 3.

Almost.

[Kappa]

That almost makes me wish I bought a new 3.

Almost.

They are not that special

[loki]

repost?

http://ccmeets.com/wp-content/uploads/2014/07/ZG-flares.jpg

[GWN]

juan's old wheels and flares from last season. now much wider and much chromier

[FD22]

repost?

http://ccmeets.com/wp-content/uploads/2014/07/ZG-flares.jpg

Car, yes. Picture, I don't think so.


juan's old wheels and flares from last season. now much wider and much chromier

I'm not a huge fan of his new setup. I prefer the one pictured here.

[Dave_The_BMXER]

Looking back, me too.

[GWN]

Car, yes. Picture, I don't think so.



I'm not a huge fan of his new setup. I prefer the one pictured here.

I like the new flares because they're insane, but agreed he should have kept the Emitz. Would trade anything in the world for a set of emitz

[Mr Wilson]

Pics of the new setup on the blue one?

[07carbon3]

https://scontent.cdninstagram.com/hphotos-xaf1/t51.2885-15/e15/11049198_355647281305573_567644125_n.jpg

[loki]

I prefer the new wheels

[The Wolf]

looks groce

[Dave_The_BMXER]

The new bumper does nothing for me.

[FD22]

https://scontent-ord.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/11205515_360398287498085_3279727669718899180_n.jpg ?oh=9a6d1ff06927f5b07586178f49e38743&oe=55D61C41

I like this

[GWN]

i want vinyl wrapped tails

[paulabreu]

http://images.tapatalk-cdn.com/15/05/05/7cc6a4a1f33756b513d87d3f9dd653d6.jpg

[thirdgen3]

The new bumper does nothing for me.

+1

[FD22]

http://images.tapatalk-cdn.com/15/05/05/7cc6a4a1f33756b513d87d3f9dd653d6.jpg

Am I the only one missing the "flush"ness in this?.. LOL damn that's crazy wide though

[loki]

Am I the only one missing the "flush"ness in this?.. LOL damn that's crazy wide though

It's all about that girth

[Mr Wilson]

http://i.ytimg.com/vi/Tnod9vtB4xA/hqdefault.jpg

[Thrizzl3]

What ever happened to drivability? That car needs a turbo delete...

[NoMashMs3]

http://images.tapatalk-cdn.com/15/05/05/7cc6a4a1f33756b513d87d3f9dd653d6.jpg

This looks scary as hell

[mickey_g]

This looks stupid as hell

fixed

[GWN]

4" flares front and rear and 305 tires, reserve your judgements until the build is done

[paulabreu]

4" flares front and rear and 305 tires, reserve your judgements until the build is done

I'm actually excited to see it done

[Hyperion]

Anyone tried to turn with 305's? 265 is hard enough. The amount of cutting needed is... A lot.

[Aitch]

Just needs more pressure in the power steering rack. Hack in a fuel-pressure regulator and you should be good to go. YEAH.

[07carbon3]

http://i1051.photobucket.com/albums/s439/cjcovd/2AAF7DE1-FFE6-40CF-8C3B-4355DF2880BA_zpsjhlmblnd.png (http://s1051.photobucket.com/user/cjcovd/media/2AAF7DE1-FFE6-40CF-8C3B-4355DF2880BA_zpsjhlmblnd.png.html)
http://i1051.photobucket.com/albums/s439/cjcovd/ABA222D9-946D-4461-BEF0-1324762ECD36_zpswncusdvm.png (http://s1051.photobucket.com/user/cjcovd/media/ABA222D9-946D-4461-BEF0-1324762ECD36_zpswncusdvm.png.html)
http://i1051.photobucket.com/albums/s439/cjcovd/C3DDDE04-A46F-4D34-9312-B76B3AE728C9_zpsik8slmql.png (http://s1051.photobucket.com/user/cjcovd/media/C3DDDE04-A46F-4D34-9312-B76B3AE728C9_zpsik8slmql.png.html)

[S.F.W.]

That looks terrible .

[Aitch]

Offset and arches I like. Stretch is too much for me.

[greardon]

Hold up he just hasn't installed the lift kit yet :)

[schmat66]

i love it. the fact that he can go lock to lock on 19x14 just amazes me, i know GWN is thinking the same thing!

[SomeGuy]

This thread...

http://i.imgur.com/lVlPvCB.gif

[Mitchell3]

The first two had me like wtf. But with the flares its actually good.. I think. Moar pix?

[The Wolf]

those flares look like garbage and any 3 that has them looks like garbage.

[Mitchell3]

I'd like to see all flares in general painted body colour, I'm not a fan of this just leave it black.

[Hyperion]

i love it. the fact that he can go lock to lock on 19x14 just amazes me, i know GWN is thinking the same thing!

Considering he has it mounted on the step lip, and super stretched, it's more like fitting a 265 or 275 super stretched on a 12. While the 19" lip would still run some issues, he's made it 100x easier on him self because he could never have run 305/35/19.

[6strings]

Well that's certainly the prettiest golf cart I've ever seen.

[GWN]

his build is intriguing. everyone is way too quick to judge nowadays. once he's done, my gut feeling says it will be awesome. the dude is putting in work with this, everyone keeps trying to take that away from him and it doesn't seem right. give him a chance to finish his build before you deem it terrible.

[loki]

his build is intriguing. everyone is way too quick to judge nowadays. once he's done, my gut feeling says it will be awesome. the dude is putting in work with this, everyone keeps trying to take that away from him and it doesn't seem right. give him a chance to finish his build before you deem it terrible.

I'm having deja vu

[GWN]

I'm having deja vu

so am I

someone posts unfinished build -> BUT WAIT ITS DIFFERENT -> burn him at the stake

[loki]

so am I

someone posts unfinished build -> BUT WAIT ITS DIFFERENT -> burn him at the stake

burn him with fire

[dentinger]

kill it with fire

[FD22]

https://scontent-ord1-1.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/11081293_1000633396616647_9032925652229643887_n.jp g?oh=0dc06069cc98ec1722bcd3ae0a0b7eaa&oe=55BF1834

Interesting front end on this sedan. Very interesting.

[optiklenz13]

Reminds me of a speed6..

[schmat66]

i like it

[FD22]

Reminds me of a speed6..

Yup, I had the same initial impression


i like it

:werd

Looked a bit awkward at my immediate first glance but I definitely like it

[mEtH]

Oh snap, that sedan is nice! I still think that is my favourite body style for the sedan.

[-RJ3-]

Yep that's a Russian guy. First speed3 bumper. Awesome!

[Dave_The_BMXER]

That sedan is rad as hell.

[Aitch]

To convince myself it's not a Photoshop....

http://cs7052.vk.me/c540103/v540103611/3ea0b/9i0ZIC-XSvY.jpg

[schmat66]

i dig this

https://scontent-ord1-1.xx.fbcdn.net/hphotos-xat1/v/t1.0-9/11112503_10155557610750366_3937845456456117953_n.j pg?oh=ad821b7cd761ffc2fceadd881e77da71&oe=55FD73CF

[Dave_The_BMXER]

I do and I don't all at once. I still can't decide if I'm on board with these flares 100%. I need to see them in person but Josh is too busy trying to learn wheelies.

[Mazduh]

https://scontent-ord1-1.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/11081293_1000633396616647_9032925652229643887_n.jp g?oh=0dc06069cc98ec1722bcd3ae0a0b7eaa&oe=55BF1834

Interesting front end on this sedan. Very interesting.

Sexy! The wifes sedan DOES need a new bumper.....

[Cab0oze]

https://scontent-ord1-1.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/11081293_1000633396616647_9032925652229643887_n.jp g?oh=0dc06069cc98ec1722bcd3ae0a0b7eaa&oe=55BF1834

Interesting front end on this sedan. Very interesting.
Gorgeous!!


Reminds me of a speed6..
It is actually a speed3 bumper lol....
(although with the autoexe grill)

If those grills didn't require cutting the stock stuff, you'd probably see them on everyone's speed3s.

[dentinger]

Sexy! The wifes sedan DOES need a new bumper.....

im not exactly sure how he did this. a speed3 front bumper on a sedan requires headlights, fenders, and a hood, although this looks like a sedan hood.

[Dave_The_BMXER]

We are assuming it's 100% speed3 bumper, could be a re pop or lower graft.

[dentinger]

im thinking lower graft. those are definitely sedan headlights and fenders

[6strings]

I do and I don't all at once. I still can't decide if I'm on board with these flares 100%. I need to see them in person but Josh is too busy trying to learn wheelies.

I'm pretty sure he's bagging it and adding flares on the bike as we speak.

[Hyperion]

Bike stays stock.
Since everyone is here now, spent 4 hours today with Al Tech finishing this.
http://images.tapatalk-cdn.com/15/05/25/a8c88822d3143ab09ce9dc89c585dc33.jpg
http://images.tapatalk-cdn.com/15/05/25/a5c4f3908663d4360b19b43255dd7016.jpg

Great guys, couldn't say anything but good things for them.
http://images.tapatalk-cdn.com/15/05/25/d16921d7ea6b9da686416e110ae291a3.jpg
http://images.tapatalk-cdn.com/15/05/25/38a0cda074f7c198e4c6530bd0149d5b.jpg
Had to sawzall the camber arm out in 3 pieces.
I rarely go to a shop, but when I do......

[thirdgen3]

i like it

+1

[Mazduh]

im thinking lower graft. those are definitely sedan headlights and fenders

If that's a graft....then it's a hella clean graft. Love it.

[Dave_The_BMXER]

https://farm8.staticflickr.com/7677/17486966634_5b4a52cd97_b.jpg

[Aitch]

https://farm8.staticflickr.com/7677/17486966634_5b4a52cd97_b.jpg
No flares, no mad camber....weak.

[loki]

No flares, no mad camber....weak.

Stance isn't everything

[The Wolf]

Bike stays stock.
Since everyone is here now, spent 4 hours today with Al Tech finishing this.
http://images.tapatalk-cdn.com/15/05/25/a8c88822d3143ab09ce9dc89c585dc33.jpg
http://images.tapatalk-cdn.com/15/05/25/a5c4f3908663d4360b19b43255dd7016.jpg


wait, are these the same flares as the ones on the red hatch? If so, looks so much better on yours. I take back what I said.

[dumbone95]

http://images.tapatalk-cdn.com/15/05/27/e032069d1a2fdee4776ea7f828de5506.jpg.

Just put my coils in today, perfect height

[GWN]

http://images.tapatalk-cdn.com/15/05/27/e032069d1a2fdee4776ea7f828de5506.jpg.

Just put my coils in today, perfect height

needs more low

[FD22]

Cleaaaaaan

https://scontent-ord1-1.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/17402_849498255086578_766420148849631344_n.jpg?oh= 338ccf14717dc88bbbeaea9e7ce11618&oe=55FE026B

[FD22]

https://scontent-ord1-1.xx.fbcdn.net/hphotos-xft1/v/t1.0-9/p480x480/11760086_873396902696713_1903314827898562478_n.jpg ?oh=366723c35a7dca056a7eccbb8e6317d8&oe=5612E58A



Is that Aitch?! Wait no, this one's still bagged :P

https://scontent-ord1-1.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/10393773_865329496836787_538656004982947410_n.jpg? oh=2423bfd3e51233d6f122ec33c629e0ad&oe=563EA088

[Mr Wilson]

Haha poor Aitch.....

[Aitch]

Who the eff made this guy a mod?

[FD22]

Who the eff made this guy a mod?

Too late, no take backs!

[Dave_The_BMXER]

The suspension on the red one is for sale actually.

[loki]

the baton has been passed along

[Kontra]

Cleaaaaaan

https://scontent-ord1-1.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/17402_849498255086578_766420148849631344_n.jpg?oh= 338ccf14717dc88bbbeaea9e7ce11618&oe=55FE026B

that looks surprisingly good. I won't go as low and wide but damn that makes me wanna ditch my cash saving plan and just go and by me a set of wheels.

[FD22]

https://scontent-ord1-1.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/12003999_895394553830281_7714029533591959684_n.jpg ?oh=62dccef108c25fd6fc748ccfbbd005bd&oe=56A912DE

[Dave_The_BMXER]

https://scontent-ord1-1.cdninstagram.com/hphotos-xaf1/t51.2885-15/e35/11821153_938129499586553_479527087_n.jpg
https://scontent-ord1-1.cdninstagram.com/hphotos-xaf1/t51.2885-15/e35/11850301_142000929478806_1994788288_n.jpg
https://scontent-ord1-1.cdninstagram.com/hphotos-xaf1/t51.2885-15/e35/1168848_1675132266035535_1631940048_n.jpg

FR-S Rocket Bunny on Genpu hatch. With much stretchy stretchy.

[Aitch]

The flares look to have been fitted rather well. Surprising. Don't care for all that stretch/lip though.

[6strings]

ugghhh.... woof.

[Dave_The_BMXER]

The flares look to have been fitted rather well. Surprising. Don't care for all that stretch/lip though.

The flares are fit fairly well for being from a completely differet car. However random emblem notch, and case cap, rear bumper junction are all jarring. Add that to the jarring wheel and tire set up and I've been jarred out of liking it.

[mathew.poulos]

https://scontent-ord1-1.cdninstagram.com/hphotos-xaf1/t51.2885-15/e35/11821153_938129499586553_479527087_n.jpg
https://scontent-ord1-1.cdninstagram.com/hphotos-xaf1/t51.2885-15/e35/11850301_142000929478806_1994788288_n.jpg
https://scontent-ord1-1.cdninstagram.com/hphotos-xaf1/t51.2885-15/e35/1168848_1675132266035535_1631940048_n.jpg

FR-S Rocket Bunny on Genpu hatch. With much stretchy stretchy.

the thread on /r/shitty_car_mods (https://www.reddit.com/r/shitty_car_mods) about this ms3 was too funny.

found it poor_mazdaspeed/ (https://www.reddit.com/r/Shitty_Car_Mods/comments/3ksmvp/poor_mazdaspeed/)

[schmat66]

i cannot wait for this car to get his other wheels on and a proper shoot, came out today!

https://scontent-yyz1-1.xx.fbcdn.net/hphotos-xal1/v/t1.0-9/12046586_10207851187787766_3325403089485573871_n.j pg?oh=763da9f97a3e5223ec792c92b3775ff5&oe=569EB3F1

[The Wolf]

FR-S Rocket Bunny on Genpu hatch. With much stretchy stretchy.

Obviously I hate the wheel/tire setup. Could look ok when painted? Maybe? I dunno.

[mcatahan]

Has anyone ever removed the rings(collars) off their coilovers to gain [B]MORE LOW[B]? If so, how does it ride and how much lower did you get? Pics would be greatly appreciated. Im currently maxed out in the rears and Im' still now where I want to be so if you guys have any feedback for me on removing the rings(collars) it would be greatly appreciatedhttps://www.dropbox.com/s/p4aa8lpi2sbhcy1/IMG_1614.JPG?dl=0

[mcatahan]

Has anyone ever removed the rings(collars) off their coilovers to gain [B]MORE LOW[B]? If so, how does it ride and how much lower did you get? Pics would be greatly appreciated. Im currently maxed out in the rears and Im' still now where I want to be so if you guys have any feedback for me on removing the rings(collars) it would be greatly appreciatedhttps://www.dropbox.com/s/p4aa8lpi2sbhcy1/IMG_1614.JPG?dl=0

https://www.dropbox.com/s/p4aa8lpi2sbhcy1/IMG_1614.JPG?dl=0

[mcatahan]

Has anyone ever removed the rings(collars) off their coilovers to gain [B]MORE LOW[B]? If so, how does it ride and how much lower did you get? Pics would be greatly appreciated. Im currently maxed out in the rears and Im' still now where I want to be so if you guys have any feedback for me on removing the rings(collars) it would be greatly appreciatedhttps://www.dropbox.com/s/p4aa8lpi2sbhcy1/IMG_1614.JPG?dl=0

http://www.torontomazda3.ca/forum/attachment.php?attachmentid=12527&d=1447433421

Sorry, still getting familiar with the forums

[Kiewan]

Found this on the wallpaper app Wally of all places.

http://images.tapatalk-cdn.com/15/11/15/a5e7d5d16dcab5738ea1c89d8a4deb6a.jpg

[schmat66]

taylors old old set up

[FD22]

My my..

https://scontent-ord1-1.xx.fbcdn.net/hphotos-xta1/v/t1.0-9/1551692_936516109718125_4671036182750293265_n.jpg? oh=61491656e78a67ad0fc7a22f2d4a97dc&oe=56DE99A5

[soccerboy1491]

Dammmnnnnnn [emoji76]

[patrickdominick]

man im falling in love with the new 3's & 6's everyday

[FD22]

man im falling in love with the new 3's & 6's everyday

Honestly. Not so much the Gen3 hatch for me just yet, but yea. I can't wait for a couple years down the road where it'll be more common to see these things modded/bagged nicely.

[Cab0oze]

My my..

https://scontent-ord1-1.xx.fbcdn.net/hphotos-xta1/v/t1.0-9/1551692_936516109718125_4671036182750293265_n.jpg? oh=61491656e78a67ad0fc7a22f2d4a97dc&oe=56DE99A5
This is photoshopped right? Does look fantastic though!!

[FD22]

This is photoshopped right? Does look fantastic though!!

Don't think so! Saw it shared by MazdaFitment. Did a little creeping and found the owner/more pics..

https://scontent-ord1-1.xx.fbcdn.net/hphotos-xtf1/v/t1.0-9/12046987_178472009161881_6413083248730937899_n.jpg ?oh=459d325b405a88d5cdb77c82e12b87e6&oe=56D3FF63

https://scontent-ord1-1.xx.fbcdn.net/hphotos-xpf1/v/t1.0-9/12366349_200640603611688_8310575296773099365_n.jpg ?oh=ba92c7547390d5f6454a43ae9b889bff&oe=570CAB3A



Aside from the car, the pictures themselves are pretty sweet too

[Cab0oze]

Don't think so! Saw it shared by MazdaFitment. Did a little creeping and found the owner/more pics..

Aside from the car, the pictures themselves are pretty sweet too
Good gawd that is hotness.
I'm tempted to buy a mz3 sedan now lol. Any idea what body kit that is/how he got exhaust pipes?

[FD22]

Good gawd that is hotness.
I'm tempted to buy a mz3 sedan now lol. Any idea what body kit that is/how he got exhaust pipes?

Agreed.
Nope, haven't dug into that yet, but I do see a lot of people asking the same questions. Must be some new kit, or possibly even a one-off kit.

[Kiewan]

Another good find on the app: Wally https://uploads.tapatalk-cdn.com/20160106/239f47fa02334b85e034095dbe5d7441.jpg

[FD22]

These Gen3's doe..

https://scontent-ord1-1.xx.fbcdn.net/hphotos-xaf1/t31.0-8/12471741_949049011798168_5267780734880470420_o.jpg

[natspriceless]

This is a fave of mine from IG

https://uploads.tapatalk-cdn.com/20160114/e2ab927b09cc49b7c9e591230c2e729c.jpg

[Dave_The_BMXER]

What work Wheels one real?

[PoSaiDoN]

They look like reps, still like them tho.
Picture for content http://uploads.tapatalk-cdn.com/20160115/06bbe59f1043fd87d6fcae3782a94160.jpg

[Dave_The_BMXER]

Sorry what I meant was is that one with the Work Wheels watermark real or a photoshop?

[FD22]

Sorry what I meant was is that one with the Work Wheels watermark real or a photoshop?

Real

[-RJ3-]

My my..

https://scontent-ord1-1.xx.fbcdn.net/hphotos-xta1/v/t1.0-9/1551692_936516109718125_4671036182750293265_n.jpg? oh=61491656e78a67ad0fc7a22f2d4a97dc&oe=56DE99A5

This has just killed the 2004-2009 generation. This looks amazing.

[shift8]

This has just killed the 2004-2009 generation. This looks amazing.
Still slow.

[Kiewan]

Still slow.

Low and slow. No need to be fast.

[PoSaiDoN]

Yup [emoji1360]

[Dave_The_BMXER]

I enjoy being low and quick, not that I've had a taste for it.

[schmat66]

static still..

https://scontent-yyz1-1.xx.fbcdn.net/hphotos-xtf1/v/t1.0-9/12741985_979315398828389_6828155837291282939_n.jpg ?oh=619a994487acf17c7e3dcfefcdd1003d&oe=575C7891

[soccerboy1491]

May not be a 3 but I know there's many Cx-5 owners here
Taken from Mazda figment on Fb.

http://uploads.tapatalk-cdn.com/20160303/7b9073489c3bf4940c3fe3ffc2387301.jpg

[Kiewan]

May not be a 3 but I know there's many Cx-5 owners here
Taken from Mazda figment on Fb.

http://uploads.tapatalk-cdn.com/20160303/7b9073489c3bf4940c3fe3ffc2387301.jpg

Some cars look good when you take the U out if SUV :P

This one is great.

[Aitch]

Some cars look good when you take the U out if SUV[emoji14]
This one is great.
A lot actually look stupid. Not this one though.

[FD22]

Not a fan of the picture itself, but the car is hella clean. So simple, but so nice.


https://scontent-ord1-1.xx.fbcdn.net/hphotos-xtf1/t31.0-8/12764325_971524276217308_3512996724549824822_o.jpg

[Dave_The_BMXER]

I wish I could pull my rear quarters that far but I started to get the buckle you see just aft of the door so I stopped.

[Hyperion]

I wish I could pull my rear quarters that far but I started to get the buckle you see just aft of the door so I stopped.
Didn't see that until now

[FD22]

I wish I could pull my rear quarters that far but I started to get the buckle you see just aft of the door so I stopped.

Yea I have noticed that from time to time. Would rather them just not go as far like you said.

[loki]

I wish I could pull my rear quarters that far but I started to get the buckle you see just aft of the door so I stopped.

how far could I realistically pull my fenders?

Supposing I didn't care about buckling etc, but just wanted to run the widest set up possible

Hyperion

I'm thinking for the track here but since the discussion came up....why not

[Hyperion]

Physically... 1 1/4 maybe 1 1/2, gunna buckle. But you'd be better off with a clean cut than an ugly pull and buckle

[loki]

Physically... 1 1/4 maybe 1 1/2, gunna buckle. But you'd be better off with a clean cut than an ugly pull and buckle

you're talking flares now

[loki]

because I'd also want my rear camber, and front too for that matter, to be closer to zero to maximize road contact

I'm just gonna have a chat with Mr Wilson

[Hyperion]

Buckle ****s up your fenders 100% and looks ugly. A clean cut would do much less damage. Don't even need to add flares lol.
I'm just talking as in hoodrat shit. Which is pretty much what you're considering if you are willing to run buckled fenders for width

[loki]

Buckle ****s up your fenders 100% and looks ugly. A clean cut would do much less damage. Don't even need to add flares lol.
I'm just talking as in hoodrat shit. Which is pretty much what you're considering if you are willing to run buckled fenders for width

pretty much was totally implying hood rat shit, but I was being serious

[Hyperion]

As to what you can fit, depends on how low and how stiff your suspension is. Assuming race height, perhaps a 255 on 9/9.5. 0 body lines left, just literally pulling to fit wide shit.
Wide rims would do you less good than a low offset 8.5 and 235/245 tho as far as weight goes

[loki]

As to what you can fit, depends on how low and how stiff your suspension is. Assuming race height, perhaps a 255 on 9/9.5. 0 body lines left, just literally pulling to fit wide shit.
Wide rims would do you less good than a low offset 8.5 and 235/245 tho as far as weight goes

anyway I will leave this thread be, and we can pick up the discussion at the next meet

[Mr Wilson]

Do eat. Flares that is.

[Dave_The_BMXER]

Didn't see that until now

This type of stuff ruins my life and is why I air on the side of "conservative" its also why I bought a truck that I want to leave mostly alone aesthetically.


loki how wide of a tire/wheel combo are you looking to fit?

The buckle you see there could be combination of pull and weight on the quarter aired out (ask me how I know). Without seeing it aired up it is hard to say but if I air out on funky ground the body of my car starts to protest so I have to be mindful.

However when we were pulling my fenders you could see it start with the pressure of the roller as well so we backed off.

[loki]

Dave, I'd like to run a 17 x 9.5 with a 255 tire

edit: let's continue this discussion in my ride thread

http://www.torontomazda3.ca/forum/showthread.php?79075-loki-s-speed3&highlight=loki%27s+speed3

[FD22]

Warning: noobz gon get confuzed.

Posted this guys car before, but came across this new pic of it. I think it works very, very well.

https://scontent-iad3-1.xx.fbcdn.net/hphotos-xlt1/t31.0-8/12828379_979310092105393_3106672302945542311_o.jpg

[Mitchell3]

I want it

[Mazdy]

3rd gen love

http://i1118.photobucket.com/albums/k602/Mazdy-TM3/Mobile%20Uploads/Screenshot_2016-03-18-20-48-05-1.png (http://s1118.photobucket.com/user/Mazdy-TM3/media/Mobile%20Uploads/Screenshot_2016-03-18-20-48-05-1.png.html)

[Aitch]

Could be painted, but actually pretty cool.

[Mazdy]

Could be painted, but actually pretty cool.

He has an instagram...apparently he used rocketbunny kit

[patrickdominick]

Looks like something Batman would drive on a budget.

[Aitch]

He has an instagram...apparently he used rocketbunny kit
Yeah I was pretty sure that was the kit source.

[Dave_The_BMXER]

Rear kinda works... IDK.

Funny the FR-S kit is the go to "they don't make it for my car so I'll slap this on"

[Aitch]

Rear kinda works... IDK.

Funny the FR-S kit is the go to "they don't make it for my car so I'll slap this on"

I just found out today (but shouldn't have been surprised) that you can easily buy an ABS RB-replica kit on eBay etc for 1/4 the original price.

[FD22]

"What are these 'tires' you speak of?"


https://scontent-ord1-1.xx.fbcdn.net/hphotos-xla1/t31.0-8/12794732_988422644527471_3379744579843444411_o.jpg

[loki]

Could be painted, but actually pretty cool.

I fear something like this would draw so much attention (read police) to your car while on the road

but I could be wrong

I love the look though

[nigvlb_]

"What are these 'tires' you speak of?"


https://scontent-ord1-1.xx.fbcdn.net/hphotos-xla1/t31.0-8/12794732_988422644527471_3379744579843444411_o.jpg

Oh my ... Oh my ... :hawt

[Maz-day]

thats Hellarub lol

:chuckle

[Dave_The_BMXER]

I like that hatch a lot. The kitsuna makes no sense, and the bumper elastics (and slightly roughed up fender) make me a bit sad but overall solid.

[Mazdy]

Edit : Mazda 2


http://i1118.photobucket.com/albums/k602/Mazdy-TM3/Mobile%20Uploads/Screenshot_2016-05-19-13-09-39-1.png (http://s1118.photobucket.com/user/Mazdy-TM3/media/Mobile%20Uploads/Screenshot_2016-05-19-13-09-39-1.png.html)

[Mitchell3]

That's not even a 3 though is it? haha

[Mazdy]

That's not even a 3 though is it? haha

FAIL! lol its a 2...haha still looks sick though...didnt see clearly the rear ..just quickly posted it up

[Cjcoolen]

I still dig that thoo

[natspriceless]

Edit : Mazda 2


http://i1118.photobucket.com/albums/k602/Mazdy-TM3/Mobile%20Uploads/Screenshot_2016-05-19-13-09-39-1.png (http://s1118.photobucket.com/user/Mazdy-TM3/media/Mobile%20Uploads/Screenshot_2016-05-19-13-09-39-1.png.html)

I LOVE THIS!!!!

[Error404]

Actually starting to love the look of the gen 3 hatches


Sent from my iPhone using Tapatalk

[patrickdominick]

http://uploads.tapatalk-cdn.com/20160827/02e3af9732cb27f83b054d54e441fdd7.jpg

Mazda y u no speed. Love this front end.

[Sampaulo17]

http://uploads.tapatalk-cdn.com/20160828/d3a148d6f2c9c39a78b6f5a5468ae30c.jpg

Sent from my SGH-I337M using Tapatalk

[greyseason]

http://uploads.tapatalk-cdn.com/20160828/d3a148d6f2c9c39a78b6f5a5468ae30c.jpg

Sent from my SGH-I337M using Tapatalk
What coils you running? Or bagged?

Sent from my LG-H812 using Tapatalk

[Sampaulo17]

What coils you running? Or bagged?

Sent from my LG-H812 using Tapatalk
Bagged bro.

Sent from my SGH-I337M using Tapatalk

[greyseason]

Bagged bro.

Sent from my SGH-I337M using Tapatalk
Ugh im so poor

Sent from my LG-H812 using Tapatalk

[Sampaulo17]

Ugh im so poor

Sent from my LG-H812 using Tapatalk
No you're not! Look at you even bought a classic truck bro you're money is there. That's more than installing bags to your car.

Sent from my SGH-I337M using Tapatalk

[b3phillip]

http://uploads.tapatalk-cdn.com/20160827/02e3af9732cb27f83b054d54e441fdd7.jpg

Mazda y u no speed. Love this front end.
Dig this

Sent from my HTC One M9 using Tapatalk