Need a MAF Sensor Clip

[ardeep]

Hello PPL. so the Wiring has come loose off the Clip for the MAF sensor. I need to get a Clip with plenty wiring just to get it to extend.

Would anyone know a good junk yard with a tonne of Mazda 3's so I can go and cut one off from there. I called 4 places and non of them have a mazda 3 in their yard.

Talk about luck!!!!

[dentinger]

My one maf wore kept braking, so i ripped the clip off and just hardwored it onto the sensor haha

i called mazda. $300+ for a new maf wiring harness.....

[ardeep]

300+ is just so FARKING AWESOME...

[dentinger]

yea thats what i said. but its the whole harness. you cant buy just the clip/pigtail.

thats always why i tore the clip off, and just wired the wires straight to the pins on the MAF sensor.

[CanSpeed 3]

What you need to do it call the wreckers and go take one off a mazda 3 or protege 3. Cut the wires 6inch or more up the harness and then replace the new one with your old wires.

[dentinger]

protege3/mazda3 = same harness??

[TheMAN]

wtf is a protege3?

why not just get this kit?
http://www.protegefaq.net/tsb/01-006-06.html

[CanSpeed 3]

protege3/mazda3 = same harness??

I dont know if the whole harness is the same, but the maf sensor is the same, and the wires are aswell. I Shrink tubbed and extended the new sensor and cars never ran better.

[dentinger]

wtf is a protege3?

i wrote that at 1 am. give me a break.


I dont know if the whole harness is the same, but the maf sensor is the same, and the wires are aswell. I Shrink tubbed and extended the new sensor and cars never ran better.

sweet. good to know!