Where to fender roll ?

[MistaChin]

I just want to know some good recommended places where I could get my fenders rolled.

I know NextMod does it for about $120 and Uni-Body does it for around $60-ish (time-dependent). Are there any other places that can do great work for a great price?

[optiklenz13]

LOL @ your sig.. Are your rims in yet? Sorry, I had to pop the question.

Oh and fender rolling, sexy!!! Use a baseball bat. LOL. kiddin'!!!

[MistaChin]

hahaha rims not in yet. Once you see the sig cleaned up then you'll know I have them haha

[Kappa]

lmao your sig is really funny... i dont know anyone in toronto but i hear from everyone that "jimmy" i think.. from street performance does great work so i bet someone will post him up lol

[blankets3]

Sg motosport does it... They built Dave Briggs drift car n will even spray it to prevent rusting if any paint chips

[MistaChin]

Sg motosport does it... They built Dave Briggs drift car n will even spray it to prevent rusting if any paint chips

Price and location?

[blankets3]

Price and location?

SG-Motorsport
160 Wilkinson Rd #31
Brampton, ON
L6T 4Z4

How Can I Get In Touch With Your Shop?

Email Us: sales@sg-motorsport.com
Phone Us: 905-463-1483

When Is SG-Motorsport Open?

Monday - Friday - 11am - 7pm
Saturday - Appointment Only
Sunday - Appointment Only

How Much Does SG Charge?

Labour: 80$ per hour
Fabrication: 90$ per hour
Dyno Tuning: 125$ per hour
Dyno Baseline: 125$ for 3 pulls
Alignment: 105$ per hour: 105$ minimum


Im going there and im in hamilton, they are very good! and last time i was there had so much eye candy (skylines,350's s14's) awwww ya

[BMWWW]

For those who'd like to DIY, the torontomazda6 lads are renting the roller from Peter, and getting together to do it.

Check out their thread.

[Hives]

Tires23 does it as well with the machine. Dunno their price though. PM them.

[07carbon3]

i need to get my fenders rolled asap

so i called nextmod and peter said they only do the rear fenders but i need all 4
called simplytire and was told there machine was broken and didn't know when its is going to be fixed as there apparently not to worried about it right now
called tire23 and was told they only rent out the machine and don't do the work

so is there any place somewhat close to the east end of Toronto where i can get my fenders rolled

[Kiyomi]

i need to get my fenders rolled asap

so i called nextmod and peter said they only do the rear fenders but i need all 4
called simplytire and was told there machine was broken and didn't know when its is going to be fixed as there apparently not to worried about it right now
called tire23 and was told they only rent out the machine and don't do the work

so is there any place somewhat close to the east end of Toronto where i can get my fenders rolled

why do u need them rolled asap? ur running 225/40/18s in ur sig, should be fine in the front, unless high offset?

[S.F.W.]

I think Velocity Auto Body will do it..

[bluemazda3]

did you install spacers?

[07carbon3]

did you install spacers?


why do u need them rolled asap? ur running 225/40/18s in ur sig, should be fine in the front, unless high offset?

i'm going to be lowering it soon and with having a +35 offset wheel ive been told by others including simplytire that i will rub if i don't roll

[midnightfxgt]

Try Stance Factory in Ajax... I think $50/corner. Since it's labour, I'd bet on a cash deal too ;)

[Kiyomi]

i'm going to be lowering it soon and with having a +35 offset wheel ive been told by others including simplytire that i will rub if i don't roll

you might be okay in the front, the rear for sure you will want to roll. how low?

[Kevin@nextmod]

how wide are your wheels?

[07carbon3]

how wide are your wheels?

18x8

[07carbon3]

ive been calling places to see if they do it and so far

Auto Modify: don't do it
euroline:$260
maximwheels:$250-300
speedstar: $205
Technotik:don't do it
Velocity autobody: don't do it
Jspec auto: don't do it

i really hope simply tire gets there machine fixed soon so i can go there

[07carbon3]

you might be okay in the front, the rear for sure you will want to roll. how low?

i got tein s-techs and they says its 1.7" drop

my wheels are 18x8 +35 offset with continental extreme conatct dw tires

[Kiyomi]

i got tein s-techs and they says its 1.7" drop

my wheels are 18x8 +35 offset with continental extreme conatct dw tires

i still doubt that you will need to roll in the front. just the rear.

[07carbon3]

i still doubt that you will need to roll in the front. just the rear.

not that i don't believe you, but whats making you think i won't need it done to the front?

[07carbon3]

is there anyone with an 18x8 +35 wheel on there car who has lowered who can chime in about this?

[Kiyomi]

not that i don't believe you, but whats making you think i won't need it done to the front?

ur wheels are not too wide, and the drop is not extreme. if anything, ull be close to flush on the 1st gen.

[07carbon3]

ur wheels are not too wide, and the drop is not extreme. if anything, ull be close to flush on the 1st gen.

ok cool thanks i guess i'll just get peter to do my rears then

[Dave_The_BMXER]

I know a guy that does it in Brampton

call or text 4164509326

Bhev is his name.

[p-o-g-i]

is there anyone with an 18x8 +35 wheel on there car who has lowered who can chime in about this?

I'm running 17x8 +35 in the front (17x9 +38 in the rear).... lowered on H-Techs which is a milder drop than S-Techs.
All 4 of my corners were/ are rubbing. Once I rolled all 4 fenders, the rubbing hasn't been as bad, but I still rub when I hit dips in the road at higher speeds.

[07carbon3]

I'm running 17x8 +35 in the front (17x9 +38 in the rear).... lowered on H-Techs which is a milder drop than S-Techs.
All 4 of my corners were/ are rubbing. Once I rolled all 4 fenders, the rubbing hasn't been as bad, but I still rub when I hit dips in the road at higher speeds.

so then i guess i will have to do my fronts too.

[p-o-g-i]

so then i guess i will have to do my fronts too.

I could be paranoid.
When people have seen my setup in person, they say it's not that bad.... and that rubbing is a regular occurence.
But for someone who has never used an agressive setup before, rubbing on a daily drive irks me.

[Dave_The_BMXER]

I bet with a stiffer setup you would rub less.

[Tokic_o]

i'm on 18x8.5 +42 and don't rub just put some camber on it.

i'm on sportlines btw

shouldn't be far off from your 18x8 +35

[SpeedBaby]

FIY for those looking to get their fenders rolled - http://idub.ca/forum/viewtopic.php?f=10&t=1187&sid=dfad5c0e4dd641ecf17fb778197a8e6d