Help with Hid wiring Kit

[mok]

Hey guys,

I just recently got these hid's from Kelvin
these are a little bit different from what I'm use to installing.
anyways have a look. I need help.
Q1. Does A and 1. B and 2 connect to each other? or Does the wiring connect to the other "exact same kit"?

Q2. If they don't connect to each other. The other wiring kit which is exactly the same connects the same way for the drivers side? should I connect another capacitor as well?

http://i79.photobucket.com/albums/j144/ginxer86/EDITWIRING.jpg


Thanks for the help.

[cwp_sedan]

I need closer pictures of the connectors to tell. It's hard to see them in the pictures. If you take some put them all closer together and also layout both sets of ballasts, bulbs, etc.

[WeatherB]

Never seen an HID wiring kit like that before...

I can tell you that 1 and 2 do not connect together. No idea what 1 is but 2 in the power input for the ballast.

I suspect that 1 is the DRL bypass or something, but that looks like a very odd way of doing this. Typically you would just use the "trigger" wire from the relay harness.

A and B may be the power outputs from the wiring kit but you'd want to confirm with someone who knows this setup.

[mazdaskit]

mine was no were like that. I just plugged into the stock harness and gt power and everything from that

[mok]

I will get pics up soon.

off to work.

[mok]

I was thinkin A 1 and B 2




Never seen an HID wiring kit like that before...

I can tell you that 1 and 2 do not connect together. No idea what 1 is but 2 in the power input for the ballast.

I suspect that 1 is the DRL bypass or something, but that looks like a very odd way of doing this. Typically you would just use the "trigger" wire from the relay harness.

A and B may be the power outputs from the wiring kit but you'd want to confirm with someone who knows this setup.

[stevenma188]

http://www.torontomazda3.ca/forum/showthread.php?40599-How-to-install-HIDs-on-04-06-Mazda-3&highlight=

Thats my thread. I used the same kit as you.

[Noisy Crow]

Wrong harness for your car?

[htc***]

http://www.torontomazda3.ca/forum/showthread.php?40599-How-to-install-HIDs-on-04-06-Mazda-3&highlight=

Thats my thread. I used the same kit as you.

You beat me for this one which I plan to link you article.

[kLuMzi]

the small box above 2, is that anti-flicker??

[yearoftherat]

the small box above 2, is that anti-flicker??

Nope. All slim ballasts have an external relay. If you look at other kits that are non-slim, the relay is built into the ballast.

[stevenma188]

^ You mean igniter?

[yearoftherat]

^ You mean igniter?

Oops, ya thats what they are...thx for the correction.

[bunchi]

the wiring with A & B looks like the relay harness - I didn't use mine. That said, 1 connects to 2, and the remaining plug connects to the stock bulb terminal.

[KenYork]

It looks like you have two wiring harnesses as the harness only has wires A,B,ground,power. Most of us have a single harness with A,B,B,ground,power.(yes, there are 2 B's). So yes your connections are correct, it's just that you have to use both the harnesses.

[McGuyver_3]

hopefully this helps

http://i11.photobucket.com/albums/a190/bmw_racing/EDITWIRING.jpg

[mok]

Thanks,

so the one's that are "X" out I just don't use?
and the plug that goes to the oem bulb i slice?
the extra kit I use exactly the same?



hopefully this helps

http://i11.photobucket.com/albums/a190/bmw_racing/EDITWIRING.jpg

[mok]

http://www.torontomazda3.ca/forum/showthread.php?40599-How-to-install-HIDs-on-04-06-Mazda-3&highlight=

Thats my thread. I used the same kit as you.


DID you get 2 of the exact same wiring kits as well steven?
the shipper accidently sent me the wrong kit. but the bulbs are getting replaced for me.
it was originally H4's but I need H7's