PDA

View Full Version : High output alternator


dave2010GT
04-07-2011, 10:50 PM
Ok so I've done tons of searching and can't find anything.

Does anyone on here know where I can get one for a 2010 Mazda 2.5.

It not anyone know of anyone who can build one or a sponsor that can chime in on this.

ANY INFORMATION WOULD BE APPRECIATED PPLLLLEEEAAASSSSEEE!!!!!!
JayJay18
04-07-2011, 11:26 PM
https://www.dcpowerinc.com/

Expensive but he know his shit.
I think highest output for our cars is 190AMPs at idle and i think its around 400 to build one
dave2010GT
04-08-2011, 12:01 AM
Thanks JayJay

I'm going to call them tomorrow.
JayJay18
04-08-2011, 01:49 PM
Let me know if you do get it and pics please because i was going to get one soon for myself aswell
dave2010GT
04-08-2011, 11:30 PM
Well I called them today so I'm SOL right now. They said they are three months away which is a bit of a problem for me so I'm looking for other options.

I might get my current alternator re-spun but that will shorten the life and because the system I'm building will be about 6000 watts I don't know how long that will last. I'm still working at it!!!!
Fobio
04-09-2011, 12:19 AM
Well I called them today so I'm SOL right now. They said they are three months away which is a bit of a problem for me so I'm looking for other options.

I might get my current alternator re-spun but that will shorten the life and because the system I'm building will be about 6000 watts I don't know how long that will last. I'm still working at it!!!!

6000w?!

run 2 alternators?
dave2010GT
04-09-2011, 10:03 AM
Sorry to the total rated power of the system will be 6000watts.

I'll never e using the full power and based on my math I think I need an alternator that's 200 amps or in that range
JayJay18
04-09-2011, 11:29 PM
Sorry to the total rated power of the system will be 6000watts.

I'll never e using the full power and based on my math I think I need an alternator that's 200 amps or in that range

You are running 6000watts peaks right?
Thats about 2000RMS right?
The HO fro DC at 190AMP is at idle so itll be around 250 at high rpm so that will be good enough.
That and 2 1400 watt batts will do you fine.
My system is running 2500-3000 and i will be running that alternator and 2 1800 batts from kinetic.
Do it right and get the ALT from DC its worth the wait trust me all i hear is good things about them