Help Getting wire from door to fuse box

[mcordy]

I tried search and came up with nothing. Does anyone know of a how to or can help I am trying to run a wire from my door through the wire bundle and eventually to the fuse panel. Can anyone offer any assistance at all :D

Thanks

[Default User]

Are you tapping into the wire or are trying to run a wire connected to say, an LED?

If tapping - tap into it through the kick panel

If running - You'll likely have to Pull off the kick panel and door panel.

[Noisy Crow]

You will need to be more specific. Are you running this wire from inside the door to PJB ("fusebox") under the glovebox? Why only one wire? (What are you connecting?)

[mcordy]

i'm trying to get power to led's in the wing mirror

[Default User]

Shoot. Forgot all about this.
Were you able to sort it out?

[yearoftherat]

You will have to feed teh wire thru the molex connector which is the rubber boot between the door and the car. Its a real pain in the arse to remove. Here is a guide that might help you out:

http://www.mazdas247.com/forum/showthread.php?123693987-How-To-Install-LED-Side-Mirror-Turn-Signals