PDA

View Full Version : S.F.W.'s 2010 MS3 - dyno charts



S.F.W.
05-26-2011, 02:21 AM
Went to APH today. Had a baseline dyno done, as well as a HPFP install. Dyno results below.

http://img706.imageshack.us/img706/6372/ami2010ms3dyno.jpg

sol_searchin
05-26-2011, 04:07 AM
Fairly consistant, not to bad for stock, what did they rate these at from factory?

laksman91
05-26-2011, 04:51 AM
I guess for information purposes, 3rd gear pull.

sp3GT
05-26-2011, 08:51 AM
Fairly consistant, not to bad for stock, what did they rate these at from factory?

263HP, 280lb-ft those numbers look about right

-cj-
05-26-2011, 08:52 AM
That's a 4th gear pull I'm pretty sure. APH only dynos in 4th or 5th unless you ask for 3rd.

Not bad numbers Ami! I wonder tho, did he calibrate the gear ratio at the start of the session (Brian usually does). Unless that gear ratio # means something else, he is using the same ratio as the 1st Gen's, which have shorter gears. That might skew the numbers a bit.

S.F.W.
05-26-2011, 10:28 AM
That's a 4th gear pull I'm pretty sure. APH only dynos in 4th or 5th unless you ask for 3rd.

Not bad numbers Ami! I wonder tho, did he calibrate the gear ratio at the start of the session (Brian usually does). Unless that gear ratio # means something else, he is using the same ratio as the 1st Gen's, which have shorter gears. That might skew the numbers a bit.
He did the gear calibration at the beginning. I am not hugely concerned about the numbers as it is just a baseline. As long as the method remains consistent and I can track progress, I will be pleased.

MajesticBlueNTO
05-26-2011, 11:00 AM
it's interesting that the DynaPack calculated the gear ratio at the hub as the exact same one as the Gen1 MS3's (4.625). Nice baseline regardless. For future dynos, make sure the ratio is calculated the same.

Comparison:
4th gear ratio in the Gen2 is 1.03:1... Final drive ratio in the Gen2 for 4th is 4.19:1 ...overall ratio (4th gear X final drive) = 4.316

4th gear ratio in the Gen1 is 1.171:1... Final drive ratio in the Gen1 for 4th is 3.941:1 ... overall ratio (4th gear X final drive) = 4.615

fywdyl
05-26-2011, 11:29 AM
Nice! Will we be seeing you this Sat as well?

S.F.W.
05-26-2011, 11:37 AM
Nice! Will we be seeing you this Sat as well?
indeed you will, and with some minor modifications made before round 2.

fywdyl
05-26-2011, 11:55 AM
indeed you will, and with some minor modifications made before round 2.

Excellent! Can't wait.

S.F.W.
05-28-2011, 07:26 PM
Round 2 below. Added Corksport SRI with TIP, and Turbosmart Kompact BPV. 23 HP increase.
http://i4.photobucket.com/albums/y135/SFW079/Dynoday1.jpg

Scottobot
05-28-2011, 07:38 PM
WOW.. makes me want to get an SRI even more.. if only I wasn't such a chicken about insurance. :(

SSmoked
05-28-2011, 08:40 PM
cute numbers bro.

philipfreire
05-28-2011, 08:43 PM
cute numbers bro.

ROFL