Problem with DDM Tuning 3000k H11 kit (fogs)

[mikewgs]

I just tried to install a 3000k kit from DDM for my fogs (H11). For the life of me, I can't get the bulb to rotate clockwise and lock into place. Tried the stock Halogen bulb again, rotates in just fine.

I know of lot of you have DDM kits, so I'm wondering if others have run into the same problem.

2006 Mazda 3 Sport.

[JaYson]

I ran into this problem with my shitty aftermarket LED fogs.

it was because the little metal "spring" piece, thats supposed to help it lock into place...didn't really spring at all...therefore it just stood inthe way of locking into position.

i had to smack that little metal tab to get it to seat down a little, inorder to squeeze the bulbs in

not sure if that does anything for you...but thats my experience with my fogs....