Forge BPV Spring setup

[gar_lei]

Hello

I'm at 17-18 psi right now
MS3 2010 w/ Cobb SF intake and Cobb AP Stage 1

I want to know which Spring setup would be best for me?
I'm runing with the spring that came installed in it (Yellow)

So far I hear the release all the time even at -2psi.
I dunno what's normal what's not and what I should expect to c or not to.
It would be great if someone can guide me through
THANKS!

[Mr Wilson]

Most seem to run blue at a minimum and once moded start to add shims. The red is too stiff.

[2zoom]

Im on the blue spring with no shims....that is all.....

[gar_lei]

how would I know if Yellow is good or not?
Forge says Yellow is for 15-25psi

[chris.joh]

Blue spring 1 shim

[greardon]

I search around the web before setting mine up and it seem that blue spring with 2 shims was the most common setup, I have been running it for a couple weeks now with no issue and MUCH better than the fisher price thing they had in from the factory. Of course everyone one has their own thoughts, but this has been working great for me and have no interest in changing it. Hope this helps

[gar_lei]

what would be the consequences if I'm using a spring that's too soft or too stiff?

[breakfasteatre]

red, 5 shims of cardboard for me, sounds wicked