Need Help - License Plate Light Cover

[adubya]

Alright, so after doing some grocery shopping, I come out to my car to find some a$$hol3 (insert other choice words here :flaming :rant) decided to "bump" my bumper leaving a nice indent where the passenger side license plate light is, thereby knocking the light cover out of its assigned hole. Can someone please provide advice on how to put this back in?

[n00bMeiSter]

It slips right back in very easily.
But you'll have to get on your hands and knees so you can see it.

Not much else to say really. Once you see it, you'll understand :)

[Strongjag]

Lie on your back and look up, just clips back up and in.

[Chuckie]

from personal experience, any little bump in that area will easily break one of the two clips and it will need to be replaced.

If it didn't break. Just pop it back in.

[Kiyomi]

for gen 2s, just pull back on the bumper from where it is supposed to go and it should go rite back in.

[adubya]

alright, i got the clear plastic cover in place, but BOTH assemblies are now free floating within the bumper...any idea how much those are to replace?

[n00bMeiSter]

Talk to Flipdady, he can tell you.

[DualSoul]

from personal experience, any little bump in that area will easily break one of the two clips and it will need to be replaced.

That'd explain why each of mine had 1 clip broken :S

[adubya]

Talk to Flipdady, he can tell you.

will do